HANSTAR 5800 -OVERHEAD IONIZING AIR BLOWERModel 5800
Hanstar 5800 overhead blower is a member of Hanstar ionizing air blower, which is designed to provide target coverage for electrostatic problems.
DESCRIPTION:
1. The overhead ionizing blower produces an air flow that is rich in positive and negative ions. Directing the air flow on an object that has a static electricity charge will neutralize the charge.
2. The overhead ionizing blower has 3 small fans to produce air flow. The volume of air flow is controlled by a variable speed control which provides a wide range of air flow setting. The high voltage AC is applied to a circular arrangement of tungsten steel ion emitter points which results in an intense alternating electric field at the tips of the emitter points. It is this electric field that creates alternating polarity ions in the air flow. To assure that the unit is working properly, the high voltage AC is monitored by an ionization indicator lamp.
3. The overhead ionizing blower features a patented balancing circuit. Also features a patented built-in emitter point clear. Using the point clear takes only seconds. Cleaning the emitter points on a weekly basis prevents the build-up of airborne debris all electrical ionizers are prone to. This keeps your blower working in top form for the life of the unit.
4. The overhead ionizing blower was designed for use with sensitive electronic components, where electrostatic discharge is a problem. The 5800 can also be used where static electricity causes problems such as: attraction of dirt to product, misalignment of small parts due to electrostatic “jumping” and undesirable adhesion of plastic films due to electrostatic charge.
5. Widely used in the field of Data Storage Manufacturing, Electronics Assembly, Semiconductor Manufacturing, Pharmaceutical Plant, & in Explosives -Product Productions
FEATURES:
1. Three airflow output, cause huge air coverage.
2. Adjustable speed control for air flow rapidly neutralizes static charges.
3. Inherently balanced in output. Integrated blower and power supply.
4. Ionization indicator lamp.
5. Proven Anti-static capabilities ( Tested & is currently being used by many Electronics Factories in the China, Taiwan, Thailand, India,& in the Philippines)
SPECIFICATION:
Operating voltage 220V 50Hz / 60Hz
Current consumption 0.62A
Operating temperature 0-50℃
Air coverage 110cm x 120cm
Air volume 330CFM
Ion balance 0V +/-10V
Passed ESD STM3.1- 2007; IEC 61340-5-1 standard
Size 1100mm x 110mm x 184mm
Weight 11.7 Kg
Decay test results:
Testing conditions
Operating voltage = 110V/220V Testing voltage= 1KV to 100V Temperature: 22℃
Distance 300mm 600mm 900mm 1200mm
Left 300mm 1.8s 2.5s 5.2s 8.6s
Centre 1.3s 2.2s 4.3s 7.5s
Right 300mm 1.7s 2.3s 4.8s 8.3s
Remarks:
1. Distance measured in mm, decay time measured in seconds.
2. Test data from ME 268A charge plate analyzer.
3. Test figures are subject to the variation in the atmospheric conditions.
-----------------------------------------------------------------------------------------
notes:
1. lower cost alternative to Simco Overhead Ionizers. Sobrang Mahal ng mga Simco Ionizers. same output specs ng Simco.
2. during shipping, dapat walang light bulb, nababasag yung bombilya during shipping. Its up to the end-users kung lalagyan nila ng ilaw yung ionizer. Very easy lang naman lagyan ng ilaw to. Just unscrew the back cover then insert the light bulbs to the light bulb sockets. 2 pcs ang pedeng ilagay na light bulb dito. But usually hindi na nilalagyan ng clients kasi maliwanag na sa production area nila
