Replacement soldering tip for Goot KS-30R/40R

Goot Replacement Tip for Goot KS-30R/40R 

PN. R-48B

Specifications:

	Model	Voltage	Power Consumption	Heater	Length	Weight	Accessories
	Goot KS-30R	220V	30W	Nichrome Heater	205mm	45g	Soldering Iron Tip (R-48SB)
	Goot KS-40R	220V	40W	Nichrome Heater	205mm	45g	Soldering Iron Tip (R-48B)
	Goot KS-60R	220V	60W	Nichrome Heater	230mm	65g	Soldering Iron Tip (R-6B)
	Goot KS-100R	220V	100W	Nichrome Heater	240mm	75g	Soldering Iron Tip (RD-68BC)

GENERAL ELECTRONICS SOLDERING IRONS- GOOT

SOLDERING IRON  (220V AC 50/60Hz)- direct plug

Specifications:

	Model	Voltage	Power Consumption	Heater	Length	Weight	Accessories
	Goot KS-30R	220V	30W	Nichrome Heater	205mm	45g	Soldering Iron Tip (R-48SB)
	Goot KS-40R	220V	40W	Nichrome Heater	205mm	45g	Soldering Iron Tip (R-48B)
	Goot KS-60R	220V	60W	Nichrome Heater	230mm	65g	Soldering Iron Tip (R-6B)
	Goot KS-100R	220V	100W	Nichrome Heater	240mm	75g	Soldering Iron Tip (RD-68BC)

Goot KS-30R

Goot KS-40R

Goot KS-60R

Goot KS-100R

notes:
1. Instruction Manual

SOLDER PASTE Goot BS-10

SOLDER PASTE Goot BS-10

Product Description: 

A surface to be joined that is oily or oxidized will prevent solder from spreading during soldering. This soldering paste removes such oil or oxides and improves wettability. Assists soldering of electrical wiring and electrical components in hobby kits.

Composition and content:

• Vaseline - 80- 90%
• Zinc chloride - 4- 6%
• Ammonium choride - 1- 3%
• Paraffin - 6- 9%
• Water - 2-4%

notes:
1. How to use: 

1. Using the end of a match or toothpick, apply a little soldering paste to the leads that will be soldered
2. Place the soldering iron tip over the leads.Contact the solder against these leads. Heat the solder till it flows freely, then quickly move the soldering iron and solder away.

How to clean:

• Using the cotton swab apply a little IPA (isopropyl alcohol) on the stain and wipe it off using tissue paper or a piece of cotton. Remove it completely to avoid surface corrosion.

CAUTION:

• This soldering paste is acidic. Flux residue should be removed to avoid surface corrosion. Not water-soluble.
• BS-10 is not suitable for use on PCBs. Applying BS-10 to printed circuit boards could result in electric leakage leading to fire as BS-10 contains electrolyte (a conductive substance).
• Do not dip the soldering iron tip directly into the soldering paste. 

2, Instrucion Manual