Desoldering Wick /braid CHEMTRONICS Chemwik (made in USA)

Chem-Wik® Rosin SD ( made in USA)

The fast, safe rosin flux desoldering braid packaged in static dissipative bobbins, ITS HALIDE FREE

■ Chem-Wik® Rosin packaged in static dissipative bobbins
■ Reduces the risk of damage associated with static electricity
■ Coated with noncorrosive ultra high purity Type R rosin flux
■ Quickly and thoroughly removes solder

Static Dissipative Packaging
■ DOD Standard 1686C and MIL-HDBK-263B
■ Mil-Std-2000A
■ Mil-B-81705C Static Decay Rate Provision

PermaPak™ Barrier Packaging contains 25 bobbins per package

Wick Size #1 White/Gray

0.03" / 0.8mm wide - best for SMD and micro-circuits

2-5L

5' / 1.5m L, ESD-safe bobbin

25 bobbins/case

 

 ---------

 

Wick Size #2 Yellow

0.06" / 1.5mm wide - best for small pads and SMD

5-5L

5' / 1.5m L, ESD-safe bobbin

2   5 bobbins/case

--------------

 

 

Wick Size #3 Green

0.08" / 1.9mm (2mm) - best for medium pads

7-5L

5' / 1.5m L, ESD-safe bobbin

25 bobbins/case

 

----------

 

Wick Size #4 Blue

0.110" / 2.8mm - best for large pads

 

10-5L

5' / 1.5m L, ESD-safe bobbin

25 bobbins/case

 

 

 

 

 

 

 

 

 

NOTES:
1. ALL sizes are available now-
2-5L - equivalent of size #1
5-5L- equivalent of size # 2
 Green (7-5L)- 1.9mmx 1.5m ( equivalent of size #3)

 Blue (10-5L) – 2.5mm x1.5m ( equivalent of size #4 )

 

 

 ========

notes: 

1.

How are Soder-Wick and Chem-Wik desoldering braid products classified?

Chemtronics uses 2 types of flux: Soder-Wick and Chem-Wik lines use natural gum rosin. Per J-STD-004 Section 3.2, they are classified as ROL0. Per British Std. EN 29454-1:1993 and ISO9454-1:1990, they have a classification of 1.1.1.B. No-Clean and Lead-Free fluxes are synthetic (non-colophony)flux. Per J-STD-004 Section 3.2, they are classified as REL0. Per British Std. EN 29454-1:1993 and ISO9454-1:1990, the No-Clean and Lead-Free fluxes have a classification of 1.2.3.B.

What is desoldering wick made of?

Desoldering braid (wick) is made of fine strands of ultra-pure copper woven and coated with flux. Its geometrically precise weave design allows for maximum capillary action and solder capacity. Soder-wick optimizes heat transfer through the braid and into the solder joint, resulting in faster wicking action than any other competitive brand. Minimal flux residue on the board speeds up the cleaning process or eliminates it entirely.

 

 

DESOLDERING WICK /BRAID

DESOLDERING WICK / DESOLDERING BRAID
also called as Soldering wick, soldering braid
for REWORK

CT-1115C

SOLDER WICK (DESOLDERING BRAID)

If you need to clean solder off a circuit board, solder wick is what you need. You place the wick on the joint or track you want to clean up, and apply your soldering iron on top. The solder melts and is drawn into the wick. If there is a lot of solder the wick will fill up, so gently pull the wick through the joint and your iron, and the solder will flow into it as it passes

Available length: 1.5m, 2 m, 2.5m

Type: Regular Desoldering wick (saturated with wash-free RMA flux)

Size: 1.0, 1.5, 2.0, 2.5, 3.0mm

CT-1115C	2.5mm x 1.5m

Cp-2015	2.0mm x 1.5m
Cp-2515	2.5mm x 1.5m
Cp-3025	3.0mm x 2.5m