Soldering tip cleaner (Holder with brass coil)
Lagunastar SKU= CMT-599B
Lagunastar SKU= ABC-599B
-Handy tip cleaner for more effective cleaning of soldering iron tips over the conventional sponge.
-The tip cleaner is made from coils of brass. It cleans without water! Simply plunge (stab) the iron tip into the coils to clean the tip.
-Will not reduce tip temperature while cleaning unlike normal wet sponges do
-No water required to keep moist , Handy metallic casing for bench top use
-The wire is softer than the tip plating yet harder than the oxidation that forms on the tip. It will not reduce the tip temperature.
-A great alternative to the conventional damp sponge
-May be used as a portable tool holder.
Benefits:
Won't damage your soldering tips
No messy sponges to dispose of
Faster working cycle
Cleaner tip has better heat transfer
Doesn't rust
Stays put on the work bench
-REPLACEMENT TIP CLEANER S-603 Brass coil refill Available! (cross reference: Hakko Cleaning wire 599-029)-------------------------------
notes:
1. Cross Reference= Hakko 599B
2. Good Lower cost alternative to Hakko A1561 (Cleaning Wire)- in fact they are almost the same cleaning wire.
Instruction how to use:
1. Perform solder work.2. Place the soldering iron on the iron holder.
3. Clean the tip.
4. Perform soldering work again.
After finishing one soldering step, place the soldering iron on the iron holder as it is without cleaning the tip.
If the order of step 2 and 3 are reversed, oxidization of tip will be promoted.
- kelangan pagkatapos mo magsolder, HUWAG mo muna linisin ng Cleaning Wire,ilagay mo lang muna yung iron sa stand. then pag Magsosolder ka na uli, DUN mo lang iclean yung tip sa cleaning wire Bago ka magsolder uli.
-Huwag mo iclean sa cleaning wire yung tip, then hindi ka pa pala magsosolder. mapapabilis oxidation ng tip mo. Yung solder wire kasi nag-aadd siya ng "plating" sa wire pampatagal ng buhay ng tip.
