Search Product Code or MPN or SKU here!

Lagunastar Industries Company

软焊 软焊 / はんだ付け はんだ付け
3rd Floor Unit C-22 Banawe de Sta. Rosa Bldg, Balibago, Santa Rosa City, Laguna Philippines 4026
--
Mob. 0933-5996622 SUN ,Mob. 0931-1147369 SUN, Mob. 0976-1479802 Globe , Tel. 049-2542179 --
lagunastar1@yahoo.com, lagunastar1@gmail.com, lagunastar3@yahoo.com ,
--
Skype :lagunastar.industries1 , lagunastar.industries2 , FB page= Soldering Anti-Static

Labels

May 7, 2016

SOLDER PASTE Goot BS-10

SOLDER PASTE Goot BS-10

Product Description: 

A surface to be joined that is oily or oxidized will prevent solder from spreading during soldering. This soldering paste removes such oil or oxides and improves wettability. Assists soldering of electrical wiring and electrical components in hobby kits.

Composition and content:
  • Vaseline - 80- 90%
  • Zinc chloride - 4- 6%
  • Ammonium choride - 1- 3%
  • Paraffin - 6- 9%
  • Water - 2-4%



notes:
1. How to use: 
  1. Using the end of a match or toothpick, apply a little soldering paste to the leads that will be soldered
  2. Place the soldering iron tip over the leads.Contact the solder against these leads. Heat the solder till it flows freely, then quickly move the soldering iron and solder away.
How to clean:
  • Using the cotton swab apply a little IPA (isopropyl alcohol) on the stain and wipe it off using tissue paper or a piece of cotton. Remove it completely to avoid surface corrosion.
CAUTION:
  • This soldering paste is acidic. Flux residue should be removed to avoid surface corrosion. Not water-soluble.
  • BS-10 is not suitable for use on PCBs. Applying BS-10 to printed circuit boards could result in electric leakage leading to fire as BS-10 contains electrolyte (a conductive substance).
  • Do not dip the soldering iron tip directly into the soldering paste. 
2, Instrucion Manual



Pls see Older Post or Labels

Pls see Older Post or Labels