Search Product Code or MPN or SKU here!

Lagunastar Industries Company

软焊 软焊 / はんだ付け はんだ付け
3rd Floor Unit C-22 Banawe de Sta. Rosa Bldg, Balibago, Santa Rosa City, Laguna Philippines 4026
--
Mob. 0933-5996622 SUN ,Mob. 0931-1147369 SUN, Mob. 0976-1479802 Globe , Tel. 049-2542179 --
lagunastar1@yahoo.com, lagunastar1@gmail.com, lagunastar3@yahoo.com ,
--
Skype :lagunastar.industries1 , lagunastar.industries2 , FB page= Soldering Anti-Static

Labels

Feb 19, 2009

HANSIN/ HANSTAR/ EXALT 498- Wrist Strap Tester

Hansin-Hanstar 498- Wrist Strap System Tester

Used to check wrist straps and ground cords, as well as the contact resistance between wrist strap and skin. To operate, simply connect the tester to the ground cord of the wrist strap assembly, and press the finger pad. If the wrist strap and ground cord are working properly (resistance between 500KΩ and 10MΩ), the green "GOOD" lamp will light up and an audible signal will be heard. A lit red "HIGH" lamp, with no audible signal heard, indicates loose contact between wrist band and skin (resistance greater than 10MΩ). A lit red "LOW" lamp, with no audible signal heard, indicates a faulty ground cord resistor (resistance less than 500KΩ). It Comes with 8-ft. grounding wire and 9V battery.

Features:
• Can be used anywhere for quick and easy checking variety of grounding systems.
• Ensures employee safety.
• Eliminates product defects caused by static electricity.
• Battery operated (included)

Specifications
Power Supply 9V Dry Battery

LED Indication Calibration Resistance Buzzer
LOW (Red) R <> 9M ohm OFF

Note: The tolerance in resistance is set to 0 +10% for the
Lower Limit of 800 KiloOhm and -10% to 0 for the upper limit of 9 MegaOhm
-----------------------------------------------------------------------------------------
notes:
1. the Manual

===============

Wrist Strap System Tester EXALT 498

 Used to check wrist straps and ground cords, as well as the contact resistance between wrist strap and skin. To operate, simply connect the tester to the ground cord of the wrist strap assembly, and press the finger pad. If the wrist strap and ground cord are working properly (resistance between 500KΩ and 10MΩ), the green "GOOD" lamp will light up and an audible signal will be heard. A lit red "HIGH" lamp, with no audible signal heard, indicates loose contact between wrist band and skin (resistance greater than 10MΩ). A lit red "LOW" lamp, with no audible signal heard, indicates a faulty ground cord resistor (resistance less than 500KΩ). It Comes with 8-ft. grounding wire and 9V battery.

Features:
• Can be used anywhere for quick and easy checking variety of grounding systems.
• Ensures employee safety.
• Eliminates product defects caused by static electricity.
• Battery operated (included)

Specifications
Power Supply 9V Dry Battery

LED Indication Calibration Resistance Buzzer
LOW (Red) R <> 9M ohm OFF

Note: The tolerance in resistance is set to 0 +10% for the
Lower Limit of 800 KiloOhm and -10% to 0 for the upper limit of 9 MegaOhm

 

 





 

https://www.youtube.com/watch?v=kG4tiBTbIS4

Pls see Older Post or Labels

Pls see Older Post or Labels