Hanstar PX- 968 Solder Iron

Hanstar PX- 968 Solder Iron- direct Plug

- Equivalent for Goot px-601 , but this is even better because it has LCD temperature controller

- 90W , Very Powerful!

- Self Temperature Calibrating

- comes with Free Solder Iron Stand

- very powerful & low price, it will fit the budget & its performance

& power is very good.

-It is designed for Industrial Factory usage ,

but its price will also fit the budget of small repair center

Specifications:

Name	HANSTAR PX-968 Lead-free soldering iron
Power consumption	90W(Max. 143W)
Input/output voltage	Input 220V/Output 220V
Temperature range	0-450 Deg C
Tips items	900M Series
Heating element	P1324 (220V printed porcelain )

=======================

notes:

1. Instruction Manual

968 keys functions and the iron setting:

1. Power on:

Press * key, the acquiescence temperature is 350deg C.

2. Set temperature:

Press the * key for once when the power is on. The LED will display the twinkling value of set temperature, then press + or – key to adjust the temperature you need. The temperature will goes up or down 5 degC when you press once. After 5 seconds (or press the * key for twice), the iron will go back to work, the temperature setting will be finished. The value you set will be saved and won’t be affected by power on or power off.

3. Temperature calibrating:

When the power is on, and the temperature is constant, test the real temperature by thermometer (We recommend the 191 thermometer), press the * key for twice, then input the value of real temperature and press * key for once or after 5 seconds the iron will go back to work.

For example:

The set temperature is 350deg C, but the real temperature is 380deg C, then press the * key for twice, the LED will display shining 350℃, press + key and set to 380deg C (Every one press the temperature will goes up 5degC), press * key (or after 5 seconds) the iron will go back to work, then finish temperature calibrating.

4. Turn off:

Keep press the * key for 3 seconds, the iron will turn off automatic.

Troubleshooting guide:

Warning: Disconnect the power plug before servicing. Failure to do so may result in electric shock. It must be replaced by the manufacture or similarity qualified person to avoid personal injury or damage to the unit.

Problem 1: LCD no display! - Please check the fuse inside.

Problem2: LED can display, but no heating! - Please check the heating element.

Vessel Ionizer-Fan Type F6CL-E (with clip)

No.F6CL-E Ionizing Mini-Fan with Clip

●Ionizing method: Piezoelectric high-frequency AC corona discharge.

●Featuring a compact, lightweight design. Compact fan-shaped ionizer.

●Interior LED light lets you check for dirt on the electrode needles visually.

●By detaching the louver, the needles can be easily cleaned. Automatic shutoff for electrode over the needles.

●Comes with a clip for easy installation. The unit can be flexibly installed on a cell-production stands or desks at most appropriate angles.

●Warning indicator notifies you if the fan locks up or abnormally high voltage is detected. LED lamp notifies you in case of abnormalities. Also, its safety mechanism automatically stops the fan and ion generation when the louver is taken off.

 Specifications

Ion Generation Method	High Voltage AC Corona Discharge
Output Voltage	AC 3.5kV
Input Voltage	DC 24V  ±5% 253mA (typ.)
Dimensions	NO CLIP: 5.1"x3.1"x3.2" (131x77x81mm) H x W x D
Weight (with CLIP)	1.1 lbs (514g)
Fan Speed	HI: 0.87m3/min (max) / LOW: 0.4m3/min
Noise Emission	HI: 58.5dB / LOW: 40.4dB
Ozone Generation	0.05ppm or less (measured at 1.97" / 50mm in front of unit)
Working Temp. Range / Working Humidity Range	41~104°C / 35~65% RH (no condensation, no freezing)  5~40°C / 35~65% RH (no condensation, no freezing)
Distance from Target	5.9"~23.6" (150~600mm)
Static Eliminating Time	See PERFORMANCE
Ion Balance	Within ± 10V (measured at 11.8"/300mm from device)
Replacement Parts	See ACCESSORIES

W	H	D	Weight	EDP No.
			（clip included）
mm	mm	mm	g
77	131	81	514	621632

※The above measurement does not include the clip and other protruding parts.

・Power supply：DC24V±5%
・Current consumption：253mA (typ.)
・Noise level：58.5dB〔Fan speed: HI〕　40.4dB〔Fan speed: LOW〕
・Fan speed：0.87m³/min〔Fan speed: HI〕　0.4m³/min〔Fan speed: LOW〕
・Accessories：Power supply transformer　№AD24-ITF6　　AC cable（1.8m）

Power Supply

●Static erasing performance



Charged plate monitor:TREK 158, which conforms to ANSI EOS/ESD S3.1, was used for measurement.
Measurement conditions: Max. fan speed, Temperature: 25℃, Humidity: 50%

Top: Ion balance
Middle: Decay time required for static discharge from +1000V to +100V
Bottom: Decay time required for static discharge from –1000V to –100V

※Static electricity erasing capability values given in this catalog were obtained in our
measurement environment. Your results may differ depending on the operating environment.

========================================================
notes:
1. From Vessel website :
No.F6CL-E /F6ST-E Ionizing Mini-Fan（10/12/10）

Developmental background

The first of its kind worldwide, VESSEL first developed the fan-type static electricity elimination equipment SDJ-08 in 2003, featuring easy installation with a "clip." Especially in cell production systems, this equipment has become an essential part of the production process. The clip installation method allows for the static electricity removal device to be attached to a pipe on cell production benches, providing an ion blow on the worktable underneath the device. The special characteristics of the equipment are its space-saving aspect and reliable static electricity removal.The successor to the original model, the F-6 series is composed of mini-fan static electricity elimination equipment featuring a compact design with a miniature piezoelectric transformer and interior LED lights installed to visually check for dirt on the electrode needles and the general operation situation. The F-6Cl model can be easily installed on a pipe on a cell production bench, and freely pointed in any orientation or angle desired due to its clip type attachment method. In addition, the F-6ST model, which comes with a low-cost table stand, is on sale at the same time. This equipment provides superior static electricity elimination performance through the use of a piezoelectric transformer that provides for long-range ionization and a powerful high-speed fan.

Description

・Compact and light mini-fan type static electricity elimination equipment.

・Equipped with a clip, the F-6CL model can be easily attached to a pipe on a cell production chassis or the side of a desk or table.

・The F-6ST model is equipped with a desktop type stand for use on a worktable.

・Equipped with screw holes on three sides of the device, the stand or clip can be removed for compact installation on equipment or jigs.

・During operation, the interior light (bright white LED) shines brightly and lets you easily check for dirt on the electrode needles or check the general operation situation.

・Maintenance and removal of the electrode needle unit can be easily conducted without any special tools.

Features

・Highly reliable piezoelectric AC method employed, providing superior ion balance (within ±10V).

・Compact and space-saving, ideal for installation on cell production benches.

・Equipped with screw holes on three sides, for compact installation on equipment or jigs (M5x0.8 screws at 3 locations).

・Fan speed can be switched to either a HIGH or a LOW setting.

・Equipped with a compact and powerful "high-speed fan," performance loss is minimized even if the filter gets dirty.

・The interior light (bright white LED) shines brightly during operation allowing you to easily check for dirt on the electrode needles or check the general operation situation.

・Equipped with a warning lamp, which notifies you if the fan locks up or abnormally high voltage is detected.

・Low voltage 24V DC power supply minimizes electrical leakage and interference with nearby devices.

・The louver (electrode needle unit) can be attached or detached and the needles can be easily removed.

・The highly efficient ionizing design method minimizes ozone production.

Main usage

ESD measures for electronic components in trays on a cell production bench, prevention of static electricity for resin parts, and the prevention of detachment in the presence of a static electric field, etc.The prevention of static electricity during work on conveyor lines in production facilities and the prevention of detachment in the presence of a static electric field, etc.Semiconductor production plants, the manufacturing of electronic equipment, the manufacturing of precision machinery, production in the food industry, the production of packing materials, printing, painting, and the production of pharmaceuticals, etc.

 

Accessories:

Electrode Needle Unit  Power Supply
================= notes: 1. actual photos:  2. you can clip the Vessel F-6CL ionizer anywhere conveniently just like this similar to Vessel SDJ-08

Vessel Static Eraser Gun G7-R

Vessel G7R-E　Gun-type Ionizer

●Ionizing method: Piezoelectric high-frequency AC corona discharge.

●Electrode needles: Tungsten.

●Compact, lightweight plastic body incorporates an ergonometric grip that fits the hand comfortably.

●Includes LED illumination to make dust visible as well as a convenient hook for hanging the device up.

●Various tip attachments are available for use in a variety of applications.

●Safe design features a built-in piezoelectric transformer.

●Electrode needles can be easily cleaned and replaced using Electrode Needle Replacement Screwdriver, G-7DR (separately sold).

●Both sides of the grip incorporate an operating LED and high-voltage malfunction alarm LED, allowing the user to check on the gun’s operating status at any time.

W	H	D	Weight	EDP No.
mm	mm	mm	g
105	150	36	198	621621

・Applied voltage：AC2.3 kV

・Power supply： 24 VDC ±5%

・Current consumption： 100 mA (max. when using LED illumination)

・Air supply pressure：0.1 MPa to 0.6 MPa

・Air supply hose diameter：6 mm × 4 mm

・Airflow：202 L/min (at 0.3 MPa)

・Noise level：84 dBA

・Ion balance: Within ±10 V; Decay time: 0.5 sec or less

(150 mm from surface, 0.3 MPa, Standard Nozzle)

・Static erasing area

Accesories：

Power supply transformer No. AD24-ITC-E

Standard Nozzle (G-7SN)

==========================================

Replacement & Optional Parts for Vessel G7-R

Mr. Steve Kitamura of Vessel Co. (Japan)

Mr. Steve Kitamura (left) & Ferdinand Estanislao (right)

Mr. Steve Kitamura, the Manager for International Sales Division of Vessel Co. (Japan) visited Manila last April 10-11, 2011 . He visited some of his clients in Laguna like Hitachi, & other major electronics & Car Factories in Santa Rosa City, Laguna

Thank you very much boss Steve for your visit & for some of the samples you gave to us.
Hopefully Lagunastar Industries can contribute in keeping Vessel Tools popular in the Philippines

HANSTAR 983A Automatic glue dispenser (Digital display)

HANSTAR 983A - digital Automatic Liquid Dispenser with time control.

To push the liquid pneumatically, controlled by time, to be sure the same dispensing drops and dispensing cycle

time, regulating the air pressure with suitable tip at your equipments of the different liquids as glues, solder pastes.

Applied for 10 types of steel tips and 5 types of plastic tips for various customers’ needs…

SPECIFICATION：

Power supply: AC 220V+/-10%/50Hz / Or AC 110V+/-10%/60Hz ( available upon request)

Power consumption: <8W

Function mode: Hand mode/ Autoloading mode

Air source: max.0.99MPa

Min.dispensing quantity: 0.01ml

Stress control range: 0.05MPa--0.99MPa

Size: 235mmx 225mmx 63mm

Time control range: 0.01S-1S; 0.1-10S; 0.2-20S ;0.3-30S

Weight: 2.2kg

-1 set includes the Main Dispensing Controller, Barrel Stand, Barrels, needles, foot switch, and adapter assembly

- Cross Reference = JND-983A Digital Automatic glue dispenser

BOTH Hanstar 982 & Hanstar 983A:
Adapt to the following liquid: instant glue, red glue, anaerobic glue, black glue, silica glue, SMT red glue, yellow glue, silver glue, Si glue, epoxy resin, screws fixative, Lubricating Oil, and flux.
Applicable to the following things: cell phone keys, seals, switches, connectors, computers, digital products, digital cameral, mp3, mp4, electron toys, horns, buzzer, electronic components.

Anyi- Digital Caliper with Carbide tip

Anyi- Digital Caliper with Carbide Tip
6inches = PN. 111-251

-Carbide- tipped measuring faces to improve the durability & longevity. -The internal Jaws measurement accuracy can accord with DIN862 -Zero- setting at any position -Data output

ANYI- the most professional manufacturer of Calipers in China. Panlaban sa Mitutoyo Japan but at much lower price

Anyi-Digital Caliper - IP67

Anyi- Digital Caliper IP67 -Waterproof, Oilproof, anti-electromagnetic Interference, protection Level IP67 ( CEI60529)

6inches = PN. 111-281


ANYI- the most professional manufacturer of Calipers in China. Panlaban sa Mitutoyo Japan but at much lower price
==========================================
notes:
1. Instruction Manual

Anyi-Digital Caliper with Broad Measuring Face

Digital Caliper with Broad Face
6 inches = PN 112-801

- Broad or wide measuring faces are mainly used for measuringthe diameter of the wire rope to ensure safe measurement

- Hardened measuring faces are wear resistant

- Zero- setiing at any position , Measuring faces dimension can be customized

this is used mainly for the elavator industry to measure the wire diameter of the steel rope for safety monitoring

ANYI- the most professional manufacturer of Calipers in China. Panlaban sa Mitutoyo Japan but at much lower price