Vessel Ionizer-Fan Type F6CL-E (with clip)

No.F6CL-E Ionizing Mini-Fan with Clip

●Ionizing method: Piezoelectric high-frequency AC corona discharge.

●Featuring a compact, lightweight design. Compact fan-shaped ionizer.

●Interior LED light lets you check for dirt on the electrode needles visually.

●By detaching the louver, the needles can be easily cleaned. Automatic shutoff for electrode over the needles.

●Comes with a clip for easy installation. The unit can be flexibly installed on a cell-production stands or desks at most appropriate angles.

●Warning indicator notifies you if the fan locks up or abnormally high voltage is detected. LED lamp notifies you in case of abnormalities. Also, its safety mechanism automatically stops the fan and ion generation when the louver is taken off.

 Specifications

Ion Generation Method	High Voltage AC Corona Discharge
Output Voltage	AC 3.5kV
Input Voltage	DC 24V  ±5% 253mA (typ.)
Dimensions	NO CLIP: 5.1"x3.1"x3.2" (131x77x81mm) H x W x D
Weight (with CLIP)	1.1 lbs (514g)
Fan Speed	HI: 0.87m3/min (max) / LOW: 0.4m3/min
Noise Emission	HI: 58.5dB / LOW: 40.4dB
Ozone Generation	0.05ppm or less (measured at 1.97" / 50mm in front of unit)
Working Temp. Range / Working Humidity Range	41~104°C / 35~65% RH (no condensation, no freezing)  5~40°C / 35~65% RH (no condensation, no freezing)
Distance from Target	5.9"~23.6" (150~600mm)
Static Eliminating Time	See PERFORMANCE
Ion Balance	Within ± 10V (measured at 11.8"/300mm from device)
Replacement Parts	See ACCESSORIES

W	H	D	Weight	EDP No.
			（clip included）
mm	mm	mm	g
77	131	81	514	621632

※The above measurement does not include the clip and other protruding parts.

・Power supply：DC24V±5%
・Current consumption：253mA (typ.)
・Noise level：58.5dB〔Fan speed: HI〕　40.4dB〔Fan speed: LOW〕
・Fan speed：0.87m³/min〔Fan speed: HI〕　0.4m³/min〔Fan speed: LOW〕
・Accessories：Power supply transformer　№AD24-ITF6　　AC cable（1.8m）

Power Supply

●Static erasing performance



Charged plate monitor:TREK 158, which conforms to ANSI EOS/ESD S3.1, was used for measurement.
Measurement conditions: Max. fan speed, Temperature: 25℃, Humidity: 50%

Top: Ion balance
Middle: Decay time required for static discharge from +1000V to +100V
Bottom: Decay time required for static discharge from –1000V to –100V

※Static electricity erasing capability values given in this catalog were obtained in our
measurement environment. Your results may differ depending on the operating environment.

========================================================
notes:
1. From Vessel website :
No.F6CL-E /F6ST-E Ionizing Mini-Fan（10/12/10）

Developmental background

The first of its kind worldwide, VESSEL first developed the fan-type static electricity elimination equipment SDJ-08 in 2003, featuring easy installation with a "clip." Especially in cell production systems, this equipment has become an essential part of the production process. The clip installation method allows for the static electricity removal device to be attached to a pipe on cell production benches, providing an ion blow on the worktable underneath the device. The special characteristics of the equipment are its space-saving aspect and reliable static electricity removal.The successor to the original model, the F-6 series is composed of mini-fan static electricity elimination equipment featuring a compact design with a miniature piezoelectric transformer and interior LED lights installed to visually check for dirt on the electrode needles and the general operation situation. The F-6Cl model can be easily installed on a pipe on a cell production bench, and freely pointed in any orientation or angle desired due to its clip type attachment method. In addition, the F-6ST model, which comes with a low-cost table stand, is on sale at the same time. This equipment provides superior static electricity elimination performance through the use of a piezoelectric transformer that provides for long-range ionization and a powerful high-speed fan.

Description

・Compact and light mini-fan type static electricity elimination equipment.

・Equipped with a clip, the F-6CL model can be easily attached to a pipe on a cell production chassis or the side of a desk or table.

・The F-6ST model is equipped with a desktop type stand for use on a worktable.

・Equipped with screw holes on three sides of the device, the stand or clip can be removed for compact installation on equipment or jigs.

・During operation, the interior light (bright white LED) shines brightly and lets you easily check for dirt on the electrode needles or check the general operation situation.

・Maintenance and removal of the electrode needle unit can be easily conducted without any special tools.

Features

・Highly reliable piezoelectric AC method employed, providing superior ion balance (within ±10V).

・Compact and space-saving, ideal for installation on cell production benches.

・Equipped with screw holes on three sides, for compact installation on equipment or jigs (M5x0.8 screws at 3 locations).

・Fan speed can be switched to either a HIGH or a LOW setting.

・Equipped with a compact and powerful "high-speed fan," performance loss is minimized even if the filter gets dirty.

・The interior light (bright white LED) shines brightly during operation allowing you to easily check for dirt on the electrode needles or check the general operation situation.

・Equipped with a warning lamp, which notifies you if the fan locks up or abnormally high voltage is detected.

・Low voltage 24V DC power supply minimizes electrical leakage and interference with nearby devices.

・The louver (electrode needle unit) can be attached or detached and the needles can be easily removed.

・The highly efficient ionizing design method minimizes ozone production.

Main usage

ESD measures for electronic components in trays on a cell production bench, prevention of static electricity for resin parts, and the prevention of detachment in the presence of a static electric field, etc.The prevention of static electricity during work on conveyor lines in production facilities and the prevention of detachment in the presence of a static electric field, etc.Semiconductor production plants, the manufacturing of electronic equipment, the manufacturing of precision machinery, production in the food industry, the production of packing materials, printing, painting, and the production of pharmaceuticals, etc.

 

Accessories:

Electrode Needle Unit  Power Supply
================= notes: 1. actual photos:  2. you can clip the Vessel F-6CL ionizer anywhere conveniently just like this similar to Vessel SDJ-08

Vessel Static Eraser Gun G7-R

Vessel G7R-E　Gun-type Ionizer

●Ionizing method: Piezoelectric high-frequency AC corona discharge.

●Electrode needles: Tungsten.

●Compact, lightweight plastic body incorporates an ergonometric grip that fits the hand comfortably.

●Includes LED illumination to make dust visible as well as a convenient hook for hanging the device up.

●Various tip attachments are available for use in a variety of applications.

●Safe design features a built-in piezoelectric transformer.

●Electrode needles can be easily cleaned and replaced using Electrode Needle Replacement Screwdriver, G-7DR (separately sold).

●Both sides of the grip incorporate an operating LED and high-voltage malfunction alarm LED, allowing the user to check on the gun’s operating status at any time.

W	H	D	Weight	EDP No.
mm	mm	mm	g
105	150	36	198	621621

・Applied voltage：AC2.3 kV

・Power supply： 24 VDC ±5%

・Current consumption： 100 mA (max. when using LED illumination)

・Air supply pressure：0.1 MPa to 0.6 MPa

・Air supply hose diameter：6 mm × 4 mm

・Airflow：202 L/min (at 0.3 MPa)

・Noise level：84 dBA

・Ion balance: Within ±10 V; Decay time: 0.5 sec or less

(150 mm from surface, 0.3 MPa, Standard Nozzle)

・Static erasing area

Accesories：

Power supply transformer No. AD24-ITC-E

Standard Nozzle (G-7SN)

==========================================

Replacement & Optional Parts for Vessel G7-R

Mr. Steve Kitamura of Vessel Co. (Japan)

Mr. Steve Kitamura (left) & Ferdinand Estanislao (right)

Mr. Steve Kitamura, the Manager for International Sales Division of Vessel Co. (Japan) visited Manila last April 10-11, 2011 . He visited some of his clients in Laguna like Hitachi, & other major electronics & Car Factories in Santa Rosa City, Laguna

Thank you very much boss Steve for your visit & for some of the samples you gave to us.
Hopefully Lagunastar Industries can contribute in keeping Vessel Tools popular in the Philippines

Electrostatic Field meter Vessel SDL-01 ( Japan)

Vessel SDL-01

The locator is indispensable towards resolving "invisible static electricity trouble". The SDL-01 checks the charged state of products or packaging materials, the positions of static electricity removers, and confirms the removal of static electricity from the product.

Features

• The potential of charged item is digitally indicated without making contact. Invisible static electricity can be easily maesured
• Voltage is measured and indicated in units of 1000V in a range from -19.9 to +10.9KV every 0.5 seconds
• handy, portable, small and lightweight unit with a storage case
• Low power consumption enables unit to be used with 4 AA batteries for up to 6 months

==============
notes:
1. this is one the lowest cost static field meter from Japan, but very good quality. every factories must have it.
2. this " low cost" field meter is recommended for the Electronics, Semicon, & other industries such as the Plastic Industries
3. It has no charge plate ( or also called as ion balance plate) , so hindi nito masusukat yung ion balance ng mga ionizers. Yung ion balance measurement is necessary para sukatin ang performance ng mga anti-static ionizers. ang me charge plate is the Vessel Eye-01.

other actual pictures:







Vessel SDL-01 is very power efficient & at normal industrial usage, yung batteries nya ay tumatagal ng mga 6 months to 1 year.

How to Change Battery:
PLS READ INSTRUCTION MANUAL


after matanggal ang head, use one peso or 5 -peso coin to open the battery compartment, Counterclockwise Turn

Electrostatic Field meter Vessel Eye-01

Super Static Field Meter Scale
(With built-in one-chip microcomputer)
VESSEL’s EYE-01 is a palm-sized electrostatic measuring device ideal for measuring polarity and intensity of static charge on parts and assembly lines. Also, it’s very useful for checking ion balance performance of various ionizers.

What makes the EYE-01 so user-friendly and easy to use?

Easy-to-read Wide LCD screen display

• Upper left graph display – indicates negative polarity
• Upper right graph display – indicates positive polarity
• Lower section display – shows numerical values, voltage measurement unit, and functions in use.
• Battery icon indicates when to replace the battery
• LED lighting function to read measurement values in the dark

Function mode to check the static charge on parts and assembly lines.

• “Static charge measurement mode (Standard mode)” checks if the object is statically charged. It’s calibrated for voltage range 0 to 20kV.
  • ± 0 ± 1.49kV (Low range)
  • ± 1.0 ± 20.0kV (High range)

Ion balance measuring mode for checking performance on ionizers

• Compact design and lightweight makes it easy for operator to perform periodic verification of ionizers, including units that are installed in hard-to-reach places like in automated machinery or workbenches.
• Can be used to measure low voltages up to 200V in the ion balance mode.
• Ion balance plate included (charge plate).

Focus-Ring LED lights show you the correct measuring distance

• A measuring distance of 0.98” ± 0.02” (25mm±0.5mm) can be easily checked by "Focus Rings" beamed from the two red LEDs.

Easy press buttons to activate functions

• Continuous mode - allows operator to take readings longer than 5 minutes. Simply turn on the EYE-01 without activating the “auto power off function” by keeping the power button pressed in for 3 seconds.
• Hold mode - enables measurements in hard-to-reach areas. When taking measurements in space-restricted areas, simply press the “hold mode” and the measurement value will be kept on the display screen.
• Digital zero mode - allows operator to adjust the reading to zero. Simply press “reset” to adjust the displayed reading and bar graph to the neutral state.
• Ion balance mode - takes measurement readings to check the ion balance performance on various ionizers.

Quality after-purchase servicing / Calibration service available

• EYE-01 is calibrated by testing equipment that’s proved to be fully compliant with ISO standards. Inspection (calibration) certificate can be issued for additional fee.
• CE RoHS compliant

Static Voltage Measuring Range	± 0 ~ ± 1.49 kV (Low range) ± 1.0 ~ ± 20.0 kV (High range)
Ion Balance Voltage Measuring Range	0 ~ ± 200v
Measuring Distance	0.98" ± 0.02" (25mm ± 0.5mm) (between charged object and field meter)
Accuracy	± 10%
Ambient Conditions	50ºF ~ 104ºF (10ºC ~ 40ºC), 60% RH or lower
Display	Large LCD display (Digital and bar graph)
Power	9V. 6F22Y manganese battery: 1 PCE (Life: Approx. 30 hrs)
Weight w/Battery	Approx. 0.31 lbs (140g) without ion balance plate [Ion balance plate alone: Approx. 0.07 lbs. (30g)]
Accessories	Charge plate for ion balance measurement Ground cord (w/alligator clip), Battery (006P), soft case
Applications	For checking the performance of ionizers, locating and measuring electrostatic charge build-up, deciding best location for installing ionizers and testing their efficiency.

For Video of Vessel Eye-01, pls click

------------------------------
Notes:
1. cross reference from other manufacturers:

a. 3M 718 + 3M™ Model Air Ionizer Test Kit 718A
b. Simco FMX-002 , Simco Fmx-003

Notes sa paggamit:
1. It is a must to Pls read the Catalog & the Instruction Manual first before gamitin ang Eye-01. it is to familiarize your self sa parts, but very easy lang ang paggamit ng Vessel eye-01.

2. put the battery

3. put the grounding cord dun sa slot sa right side nya. ( recommended). Recommended na iground siya, but if pag ang application is hindi abot yung grounding cord, it is ok kahit hindi nakaground, but more accurate ang reading pag nakaground.

   If naka anti-static wrist strap yung users, or naka conductive shoes or heel grounder siya, or if nasa EPA ( ESD protected Area) yung operators, then hindi na need na iground siya kasi yung main body ng Vessel eye-01 is made from conductive resin

4. I power ON

5. if you will use it to measure the static charges, then tanggalin ang charge plate na nasa top head para lumitaw yung sensor, matatanggal mo yung charge plate by pushing the side buttons. Ilagay sa ilalim yung charge plate sa pamamagitan ng pagsuksok sa slot

6. then you can measure the statics, the correct distance is pag nagcoverge na yung 2 laser circle

7. pag tapos na ang reading, i Off ang eye01, then pls bring back yung charge plate sa original position nya nya sa Top position, this will also protect the sensor

8. If you will use it to measure the Ionizer performance- Ion Balance, then I power ON lang ang unit. the charge plate is in the top position, then push the ION Balance button, then it will read the Ion balance of the Ionizer.  The Ionizers are in good working condition if the reading is 0 to 50V. mas malapit sa zero mas better ang quality ng ionizers.