HANSTAR 858 SMD Rework "Hot Air" Station
SKU= HANSTAR-858
SMD ‘HOT AIR’ REWORK SYSTEMS –ESD Safe
-For Repair of SOIC、CHIP、QFP、SOP, PLCC、BGA, etc.
Features:
1. Closed path of transducer, micro
computerized zero-crossing trigger of temperature control, LED display, high
power,
fast rise of temperature, accurate and steady temperature, no impact from air volume and real lead-free unsoldering.
2. Adjustable air current, big wind volume and gentle wind, convenient temperature adjustment, and
can be applied to
several purposes.
3. There is an inductive switch in
the handle. When holding the handle, the system can enter working mode quickly
and
when putting the handle back to the handle holder, the system will enter stand-by state. Therefore, it is very convenient
to operate.
4. With automatic cold wind function,
which can prolong service life of the heating element and protect the hot air
gun.
5. Adopt alloy shell. The machine
body is small, durable and nice and covers little working space.
6. Adopt brushless fan thus enjoy very long
service life and generate low noise. Adopt high quality heating element,
which doubles the efficiency under the same situation, prolongs service life of the heating element and
saves power consumption.
7. 1 set includes 3 nozzles: A2084 (dia 8.4mm), A2127 (dia 12.7mm), A2064 (dia 6.4mm)
|
HANSTAR 858 rework |
HANSTAR 858D rework |
|
Hot Air |
Hot Air |
|
Sort: ANALOG control |
Sort: Digital control |
|
Power consumption: 700W |
Power consumption: 700W |
|
Pump: Soft wind ,Noise: < 45db |
Pump: Soft wind ,Noise: < 45db |
|
Air current: 120L/minute (Max.) |
Air current: 120L/minute (Max.) |
|
Temp. range: 100-450 deg C |
Temp. range: 100-450 deg C |
|
Handle length: 120cm |
Handle length: 120cm |
|
Size: 13.8 x 10 x 15cm, about 1.55kg |
Size: 13.8 x 10 x 15cm, about 1.55kg |
HANSTAR 858 Hot Air Rework Station
Brushless Fan with Soft Wind
Input voltage:AC 220V±10% 50Hz/60Hz
Power consumption :700W
Temperature display:Scale indication
Temperature range:100℃－450℃
Features:
- The close circuit sensor and the microcomputer are begins to control the temperature above zero, make the equipment truly achieve lead-free unsolder with high power. Warm up quickly, accurate and stabilizing temperature, without the effect of the air volume.
- This equipment can be used for many applications with adjust air volume, large amount and soft wind and convenience temperature control.
- Easy to operate, as long as user grid the handle which with sensor switch, the system can quickly enter the operating mode; and as long as user puts the handle back to the handle carrier, the system will automatically enter standby mode.
- This equipment has the cooling of the function that cans longer the life of heating element and protect the hot air gun.
