Wrist Strap System Tester EXACT 171 Wrist Strap Tester

EXACT 171
Lagunastar SKU= EXACT-171

                       note= our current email address is lagunastar1@yahoo.com & lagunastar1@gmail.com

Anti-static wrist strap tester model EXACT 171 provides simple and reliable tests.

• The operator wears the wrist strap band on their wrist as normal.
• Insert the banana plug into the jack located on the front of the wrist strap tester.
•  Then push the metal push button on the wrist strap tester.
• The tester measures the resistance of the ground path from the skin of the operator through the ground cord of the wrist strap.
• A properly operating wrist strap will give an "OK" LED indication on the wrist strap tester.  If either RED "FAIL LOW" or
• YELLOW "FAIL HIGH" LED's light, and the audible indicator sounds, then the wrist strap should be discarded and replaced with a new one.

• small size, cordless, portable operation   ,  performs test of anti-static wrist straps
• Visual and audible fail indication  ,
• simple push button test
• Uses 9V Battery, with low battery indicator (low indicator set at 6.5V)

Specifications

LED Display	Resistance Value (±5%)	Indicator Status
OK (Green)	800KΩ to ~ 10MΩ	ON
HI (Yellow)	10MΩ and above	YES
LO  (Red)	800KΩ and below	YES

Test parameters are factory set to pass 800KΩ to 10MΩ, but can be calibrated to match your own specifications  via 3 internal potentiometers. 

operating temperature 50°F to 104°F (10°C to 40°C) 

storage temperature  5°F to 140°F (-15°C to 60°C) 

relative humidity: 0% to 90% 

accuracy: ±5% 

net weight: 5.2oz (145g)

dimensions: 2.8in W  x   3.54in L  x  1.1in T  (7.1cm  x  9.0cm  x  2.8cm) 

 

 

 

                           note= our current email address is lagunastar1@yahoo.com & lagunastar1@gmail.com