Soldering Soldering Youtube
Search Product Code or MPN or SKU here!
Lagunastar Industries Company
Mob. 0933-5996622 SUN ,Mob. 0931-1147369 SUN, Mob. 0976-1479802 Globe , Tel. 049-2542179 --
Labels
- 0. HOW TO BUY? PAANO PO BUMILI? (1)
- 01. CATALOGS- HANSTAR ELECTRONICS EQUIPMENT (3)
- 1. BANAWE DE STA ROSA Shop (2)
- 1. CATALOGS- ANLIDAR BSD MYTORQ (3)
- 1. CATALOGS- ANYI INSTRUMENTS (1)
- 1. CATALOGS- BESTOOL-KANON (2)
- 1. CATALOGS- Bosch Static Control (2)
- 1. CATALOGS- BTEKTECH (1)
- 1. CATALOGS- CHEMTRONICS USA (1)
- 1. CATALOGS- EDSYN USA (2)
- 1. CATALOGS- HAKKO (1)
- 1. CATALOGS- HIOS Electric Screwdriver (1)
- 1. CATALOGS- IMADA (1)
- 1. CATALOGS- MITUTOYO (5)
- 1. CATALOGS- MTC Nippers/ Pliers- Japan (1)
- 1. CATALOGS- SOLDERINDO (1)
- 1. CATALOGS- SUNON (1)
- 1. CATALOGS- VESSEL TOOLS Japan (2)
- 1. CATALOGS- WATERUN TECHNOLOGY (1)
- 1. CATALOGS- WEONY INDUSTRIAL (1)
- 1. Lagunastar Industries - PRODUCT LIST (12)
- 1. LAGUNASTAR INDUSTRIES COMPANY- Company Profile (6)
- 2. CLIENTS (10)
- AC POWER CORD (1)
- AccuTec (1)
- AIQURA (2)
- Air Screwdriver (3)
- AKIMICHI (1)
- ANEMOMETER (1)
- ANTI- FATIGUE MAT (1)
- Anti- Static (ESD) Brush (3)
- Anti-Static CONDUCTIVE Plastic BOX (2)
- ANTI-STATIC EPA (ESD Protected Area) Work Station items (4)
- ANTI-STATIC IONIZER (14)
- Anti-Static Rubber Mat (ESD safe) (3)
- ANTI-STATIC TOOLS (2)
- ANTI-STATIC WRIST STRAP (7)
- Anti-Static/ ESD Office Supplies (5)
- ANYI INSTRUMENTS (22)
- AOYUE (2)
- AUTOMATIC LIQUID DISPENSER (Glue Dispenser) (6)
- Automatic Liquid Dispenser CONSUMABLES (3)
- AUTOMATIC SCREW FEEDER (2)
- Automatic SMD Parts Counter (1)
- AUTOMATIC TAPE CUTTER- Dispenser (6)
- AXIAL FAN (4)
- Benetech (1)
- BESTOOL-KANON (2)
- Bosch Static Control (1)
- BSD-KILEWS-ANLIDAR Electric Screwdriver (9)
- BSD-MYTORQ-KILEWS ACCESSORIES for Electric Screwdrivers (4)
- CABLE TIE GUN (3)
- Caliper-Dial (1)
- Calipers-Digital (9)
- Calipers-Vernier (2)
- CAP (1)
- Ceramic Adjusters Screwdrivers (1)
- Chamois Tip Swabs (1)
- CHEERMAN (13)
- Chem-Wik® (1)
- Chemical Engineering-PRC Exam Result (1)
- CHEMTRONICS (16)
- CircuitWorks® (5)
- CLAMP METER (1)
- CLEANROOM CONSUMABLES (9)
- CLEANROOM Products (1)
- CLEANROOM WIPERS (2)
- Cleanroom-COTTON SWABS (2)
- COIL HOSE (1)
- Conductive Pen (1)
- Conformal Coating- Konform® (3)
- DEGREASER (2)
- DEPTH GAUGE (1)
- Desoldering Gun (1)
- Desoldering Pump (5)
- Desoldering Wick (2)
- DIAL INDICATOR/ Digital INDICATOR/ Magnetic Stand (2)
- Digital Blood Pressure Meter (2)
- Digital Body Thermometer (1)
- DIGITAL DC POWER SUPPLY (4)
- Dr. Schneider (1)
- DUST BLOWER (2)
- DYFENCO (HiQ) (2)
- EDSYN (9)
- EDSYN SOLDAPULLT Desoldering Pump (4)
- EDSYN Soldering Station (1)
- EDSYN Soldering Tips (1)
- EDSYN Vacuum Pick-up Tool (2)
- EDSYN- Cutting Pliers (2)
- ELECTRIC SCREWDRIVER (9)
- Electric Voltage / Frequency and Plug of Countries (1)
- Electrical Engineering (2)
- ELECTROMAGNETIC LOCK (1)
- Electronic component (1)
- Electrostatic Field Meter (3)
- ESD Alcohol Bottles (IPA dispensing bottle) (3)
- ESD Calculator (1)
- ESD Kit (1)
- ESD Pen (1)
- ESD Safe (anti-static) Products (11)
- ESD safe Bottles (1)
- ESD TESTER (5)
- EXALT (1)
- EXSO (1)
- FACE MASK (3)
- FINGER COTS (2)
- FLUKE (1)
- Flux Dispensing Bottle (1)
- Flux Pen (3)
- FLUX REMOVER (1)
- Flux-Off ® (1)
- GAGES- Radius & Pitch Gages (1)
- GLOVES (4)
- GLOVES- ESD Gloves (2)
- GLOVES- Examination Gloves (4)
- GLUE GUN (1)
- GLUE/ Thread Locker (2)
- GOLD GUARD PEN (1)
- GOOT items (3)
- GT SONIC (2)
- HAKKO ITEMS (4)
- HANSTAR (10)
- HANSTAR Ionizer (3)
- HANSTAR items (7)
- HANSTAR Soldering Iron (1)
- HEAT GUN (2)
- HEIGHT GAUGES- DIGITAL (2)
- HEIGHT GAUGES- VERNIER (2)
- Hot Plate - Digital Preheater (3)
- HZR (1)
- ILLUMINATING MAGNIFYING LAMP (5)
- IMADA (2)
- INCOTERMS (2)
- INDOPLAS (1)
- INDUSTRIAL and Laboratory Supplies (1)
- INFRARED THERMOMETER- EAR THERMOMETER (1)
- INFRARED THERMOMETER- for Machine/ Industrial Use (7)
- INFRARED THERMOMETER/ THERMAL SCANNER (10)
- INSULATION METER (1)
- IPA (1)
- ISHIKAWA (1)
- JFY (2)
- kapton tape (1)
- KILEWS (1)
- KING'SDUN (4)
- LAN Cable Tester (1)
- LAOA (1)
- LASCAR (1)
- Laser Distance Meter (2)
- LIGHTMETER (Luxmeter) (4)
- Liquid Dispenser (1)
- LOCTITE (1)
- LUBRICANT (2)
- LUTRON (2)
- Magnifier- Loupe Magnifiers (5)
- MAGNIFIERS (4)
- MAGNIFIERS- ESD MAGNIFIERS (3)
- MAGNIFIERS- HandHeld (2)
- MAGNIFIERS- HEAD MAGNIFIERS (2)
- MAGNIFIERS- HELPING HAND (2)
- MAGNIFIERS- Magnifying Lamp (3)
- MASTECH (8)
- Measuring Tools (METERS and TESTERS) (23)
- MEDICAL TOOLS (3)
- METAL DETECTOR (3)
- MICROMETER (4)
- MICROSCOPE- Accessories (1)
- MICROSCOPE- DINO-LITE (1)
- MICROSCOPE- Ring Light (1)
- MICROSCOPE- Stereo (1)
- MITUTOYO (7)
- Mobile Phone LCD Separator (2)
- MOBILE PHONE PARTS (1)
- Mobile Phone Repair Tools (2)
- MOISTURE METER (2)
- MTC (3)
- MULTIMETER (8)
- OPTICAL METER (1)
- Overcoat Pen (1)
- Packaging items (1)
- PB SWISS TOOLS (1)
- Personal Protective Equipment (PPE) (10)
- Peso-Dollar Exchange Rate (2)
- PEZA- Manufacturing Economic Zones (1)
- PIXTER Lifting Tool (2)
- Plast-N-Glas (1)
- PLATO items (1)
- PLIERS- Cutting Pliers (10)
- PRC BOARD EXAM PASSERS- ELECTRICAL ENGINEERING (2)
- PRC BOARD EXAM PASSERS- ELECTRONICS ENGINEERING (5)
- PRECISION KNIFE (2)
- PRECISION TOOLS (2)
- Pro'sKit (2)
- PUSH/PULL Gauge meter (2)
- QINGYUAN (1)
- RUBICON (1)
- SAFETY GLASSES (1)
- SANWA (2)
- SCREW SETTER (1)
- Screwdrivers- Precision (5)
- SECURITY TOOLS (3)
- SHOE COVER (1)
- Silica Gel (1)
- SMD "HOT AIR" REWORK STATION (11)
- SMD "HOT AIR" REWORK STATION - NOZZLES (1)
- SMD "Hot Air" Rework Station- HEATING ELEMENTS (6)
- SMD RC Resistance Capacitance Meter (1)
- SMOKE ABSORBER / Fume Extractor (6)
- SMT SPLICE TAPE (2)
- SOLDER WIRE DISPENSER (2)
- Solder Bar (3)
- SOLDER IRON STAND (1)
- SOLDER WIRE (Solder Lead/ Lead-free Solder Wire) (7)
- SOLDERINDO (6)
- SOLDERING IRON for Wood Carving (1)
- SOLDERING IRON- Direct Plug (10)
- Soldering Iron- HANSTAR soldering iron (Replacement) (9)
- SOLDERING IRON- Replacement for Station based (3)
- Soldering Iron- Replacement parts (1)
- Soldering Iron- Replacement to HAKKO (2)
- SOLDERING IRON- USB Soldering Iron (1)
- SOLDERING PASTE (1)
- SOLDERING POT (Solder Bath) (7)
- Soldering Sponge (1)
- SOLDERING STATION (19)
- SOLDERING STATION- EDSYN (1)
- SOLDERING STATION- HAKKO (2)
- SOLDERING STATION- HANSTAR (12)
- Soldering Station/ Iron HEATING ELEMENTS (8)
- SOLDERING THERMAL WIRE STRIPPER (1)
- Soldering Thermometer and Tester (7)
- Soldering Tip Cleaner (2)
- Soldering Tip Tinner & Cleaner (1)
- SOLDERING TIPS (5)
- SOLDERING TIPS- Hanstar (2)
- SOLDERING TIPS- Weller (2)
- Soldering Tools Accessories (10)
- Soldering- DIP SOLDERING (2)
- SOUND LEVEL METER (2)
- SPRING BALANCER (1)
- Static Free™ (2)
- STEEL RULER (1)
- sticky mat (3)
- SUGON (2)
- SULFUR-FREE PAPER (1)
- SUNON (2)
- Surface Resistance Meter (1)
- Surface Resistivity Tester (4)
- TACHOMETER (1)
- TAPES (3)
- TES (4)
- TGK (1)
- THD (1)
- Thermocouple Wires and Thermometer Sensor / Probes (3)
- ThermoHygrometer (4)
- Thermometers (11)
- Thermometers- for Freezer/ Refrigerator (1)
- Thickness Feeler Gauge (3)
- TORQUE BITS (6)
- TORQUE BITS ( Electric Screwdriver Bits) - BSD (1)
- TORQUE METER (5)
- Torque Wrench (1)
- TRUSCO (2)
- TWEEZERS (6)
- Tweezers- Anti-Static (1)
- Tweezers- Ceramic (2)
- ULTRA JET Duster (1)
- ULTRASONIC CLEANER (6)
- UNI-T (2)
- UYIGAO (1)
- UYUE (2)
- VACUUM PICK-UP PEN (5)
- VACUUM PICK-UP Station (1)
- VESSEL AIR BLOW GUN ( DUSTER) (5)
- Vessel Industrial Bits Type A (3)
- Vessel Industrial Bits Type B (3)
- VESSEL NIPPER & BLADES (1)
- VESSEL Precision Bits (4)
- VESSEL Precision Screwdrivers (5)
- VESSEL Screwdrivers (3)
- Vessel Static Solution (11)
- VESSEL- AIR SCREWDRIVER (3)
- VGT (2)
- WATCH (CLOCK) / TIMER (5)
- WATERUN (10)
- WD-40® (1)
- Weighing Scale (1)
- WELLER ITEMS (4)
- WEONY (1)
- Wrist Strap Tester (5)
- X-ACTU (1)
- XIXIANJIA (1)
- y. FACE MASK- info (1)
- y. Technical Knowledge- ESD/ Anti-Static (1)
- z. Others (3)
- z. PHOTOS from the Net (2)
- z. Soldering Soldering News (3)
Feb 20, 2009
ANTISTATIC PLASTIC TWEEZER
Made from special Static dissipative (ESD safe) engineering plastic (Glass Filled Delrin with Carbon fiber, etc.) that has combine durability and anti-static properties.
Surface Resistance: 1 x 10^6 to 1 x 10^10 Ohms
Length:
model Length Cross reference Style
Hs-01 120mm Flathead
Hs-02 115mm Sharp Tip tweezers with raised head
Hs-03 120mm Tip tweezers (round head)
Hs-05 115mm Level tweezers
Hs-06 122mm Right-angle bent-nose tweezers
Hs-08 120mm Duckbill tweezers, Flat
STAINLESS STEEL TWEEZERS
HANSIN SS TWEEZERS
* High precision * anti-magnetic * anti-acid * anti-corrosive stainless steel tweezers
length & style:
model Length Cross reference Style
Hs-01 120mm Flathead
Hs-02 115mm Sharp Tip tweezers with raised head
Hs-03 120mm Tip tweezers (round head)
Hs-05 115mm Level tweezers
Hs-06 122mm Right-angle bent-nose tweezers
Hs-08 120mm Duckbill tweezers, Flat
TS-10 126mm TWEEZER AA
TS-11 137mm
TS-12 115mm
TS-13 121mm TWEEZER FLAT ROUND TIP 2A SA
TS-14 123mm
TS-15 118mm #7 Curved Jewelry Tweezers, 7A-SA
Feb 19, 2009
HEAVY Duty antistatic wrist strap - XJB-Wh-Posh
Product Name: HEAVY Duty antistatic wrist strap
Brand : XJB-Wh-Posh
Description: Normal antistatic wrist using soft and elastic fabric mix woven with conductive thread. Which have good conductive functions, adjustable length, spring grounding thread that can endure 30000 times environmental test and still maintain good condition, not ruptured.
Ferrule resistance : <100 ohm
Grounding resistance: 10^6 ohm
Static discharge time: < 0.1s
Diameter of wire: 2.5mm & 3mm
ANTI-STATIC WRIST STRAPs
1. Product Code No. WS- LEKO PU (PolyUrethane)
Description:
1) Material: the conductive elastic band is made of polyester, and woven stainless
steel/nickel fiber. It is located on the inside of the wrist strap, and therefore
insulates the exterior of the band
2) Grounding cord: 2m PU (polyurethane) coil cord with 1 MΩ resistor
Ground resistance = 1 MΩ
3) Band size: 2cm x 21cm
4) Color: light blue, black, dark blue
5) Technical parameters:
Current limiting resistor: 1.5%
Band resistance: <50Ω
Electro dissipative time: 0.1s
6) Characteristics: Safe and reliable , Adjustable , Some water resistance , Suitable for using in cleanroom
=====================================
2. Product Code No.: WS- XJB
Product Name: HEAVY Duty antistatic wrist strap
Description: Normal antistatic wrist using soft and elastic fabric mix woven with conductive thread. Which have good conductive functions, adjustable length, spring grounding thread that can endure 30000 times environmental test and still maintain good condition, not ruptured.
Ferrule resistance : <100 ohm Grounding resistance: 106 ohm
Static discharge time: < 0.1s Diameter of wire: 2.5mm & 3mm
=====================================
3. Product Code No.: WS- LEKO Metal
Product Name: adjustable metal antistatic wrist strap
Description: adjustable metal antistatic wrist manufactured with anti-allergic stainless steel, loop outside covered with insulation materials, anti-scrub. Adjustable length, anti-dust, suitable for long time using and normally used for class 100 clean room.
ferrule resistance:<100 ohm
Grounding resistance: 106 ohm
Static discharge time: < 0.1s
=====================================
Note: Low cost anti-static wrist strap (LEKO PVC) also available!
HANSIN/ HANSTAR/ EXALT 498- Wrist Strap Tester
Hansin-Hanstar 498- Wrist Strap System Tester
Used to check wrist straps and ground cords, as well as the contact resistance between wrist strap and skin. To operate, simply connect the tester to the ground cord of the wrist strap assembly, and press the finger pad. If the wrist strap and ground cord are working properly (resistance between 500KΩ and 10MΩ), the green "GOOD" lamp will light up and an audible signal will be heard. A lit red "HIGH" lamp, with no audible signal heard, indicates loose contact between wrist band and skin (resistance greater than 10MΩ). A lit red "LOW" lamp, with no audible signal heard, indicates a faulty ground cord resistor (resistance less than 500KΩ). It Comes with 8-ft. grounding wire and 9V battery.
Features:
• Can be used anywhere for quick and easy checking variety of grounding systems.
• Ensures employee safety.
• Eliminates product defects caused by static electricity.
• Battery operated (included)
Specifications
Power Supply 9V Dry Battery
LED Indication Calibration Resistance Buzzer
LOW (Red) R <> 9M ohm OFF
Note: The tolerance in resistance is set to 0 +10% for the
Lower Limit of 800 KiloOhm and -10% to 0 for the upper limit of 9 MegaOhm
-----------------------------------------------------------------------------------------
notes:
1. the Manual
===============
Wrist Strap System Tester EXALT 498
Used to check wrist straps and ground cords, as well as the contact
resistance between wrist strap and skin. To operate, simply connect the
tester to the ground cord of the wrist strap assembly, and press the
finger pad. If the wrist strap and ground cord are working properly
(resistance between 500KΩ and 10MΩ), the green "GOOD" lamp will light up
and an audible signal will be heard. A lit red "HIGH" lamp, with no
audible signal heard, indicates loose contact between wrist band and
skin (resistance greater than 10MΩ). A lit red "LOW" lamp, with no
audible signal heard, indicates a faulty ground cord resistor
(resistance less than 500KΩ). It Comes with 8-ft. grounding wire and 9V
battery.
Features:
• Can be used anywhere for quick and easy checking variety of grounding systems.
• Ensures employee safety.
• Eliminates product defects caused by static electricity.
• Battery operated (included)
Specifications
Power Supply 9V Dry Battery
LED Indication Calibration Resistance Buzzer
LOW (Red) R <> 9M ohm OFF
Note: The tolerance in resistance is set to 0 +10% for the
Lower Limit of 800 KiloOhm and -10% to 0 for the upper limit of 9 MegaOhm
Feb 16, 2009
Ear Infrared Thermometer Hansin ET100B
Ear Infrared Thermometer Hansin ET100B
'thermoscan'
1) Measuring range: 34.0°C~44.0°C (93.2°F~111.2°F)
2) Accuracy: ±0.2°C (±0.4°F)
3) Min Scale: 0.1°C
4) Auto shut-off in one min after nonuse
5) Power consumption: 0.6MW(working)
6) Memory: 10 recordings
7) Measuring time: 1 second
8) Beeper function
9) Safe and Hygienic
10) Battery: Lithium battery, 3 V. (common CR 2032)
11) Battery life: Approx 4000 takes
12) Size: 110×35×35mm
13) Weight: 80g (include batteries)
14) Display: easy-to-read, Three-digit LCD
15) Easy-clean, Cover Free Design
16) CE APPROVED
Walkthrough Security Metal Detector Door
Walk-through Metal Detector Door
1. Metal Detector Door (HANSTAR 200)
2. Metal Detect Door (HANSTAR 300) - Water Proof
A walkthrough metal detector that meets GB15210-2003 standards.
The 92 kg device runs on 220V power supply and requires less than 30W
operating power. It has 222x80x50 cm outer frame and 200x70x50 cm
inner frame. It operates in temperatures within -20 degrees to 45 deg C.
Applications:
Airports, Customs, Government administrations, Gyms, Public places, Prisons, Institutions, Hospitals, Financials, Entertainment venues, Courthouses, Power plants. Mine, Mints, Electronic industry, Groceries, Jewelry, Manufacturing facilities.
Specifications:
Detection method: Electric induction
Sensitivity adjustment: 100 steps per zone
Alarm: Buzzer
Power voltage: AC100-240V, 50-60Hz
Power: <=30W
Operating frequency: 5-10KHz
Operating temperature: -20 to +45 centigrade
Net weight: About 92kgs
Tunnel dimension: 2000(H)x700(W)x500(D)mm
Outside dimensions: 2200(H)x800(W)x500(D)mm Standards passed:GB15210
UNDERGROUND METAL DETECTOR
Portable METAL DETECTOR -for Security Guards
The 3003B1 is a high performance Hand Held Metal Detector designed to meet the exact requirements of the security industry. Typical uses will include body search for offensive weapons in crowd control, airport and border security, checking parcels and letters for metal objects and anywhere that hidden metal needs to be detected.
Specs: Power 9V Standard or Rechargeable Battery( 270mW)
Operating Frequency 22KHz
Operating Current <50mA , Operating Voltage 7-9V
Recharging Voltage 12V DC or 9V AC
Operating Temperature -5℃to+55℃
Net Weight 411g , Dimensions 410mm(L)x85mm(W)x45mm(H)
Typical performance figures are given below: Maximum Detection Range :
Object Low Sensitivity Optimal Sensitivity
38 Caliber hand gun 25cm 30cm
Pen knife 12cm 26cm
Razor blade 5cm 12cm
MAGNIFYING LAMP
(other suppliers' code= Fight FD-100)
----------------------------------------------------------------------------
(cross reference or other suppliers code: elet F-500B )
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
ILLUMINATING MAGNIFYING LAMP
* Magnifying and Daylight lighting combined.
* Safe to people’s eyesight. * Luminous and consistent light.
* Preferred Lens (3X, 5 x, 8x, 10x) can be chosen.
* The 22W circular light bulb is widely available at low price.
Applications - Electronics Circuit Board Assembly and Repair
- Inspection of Circuit Board.
- Can be used in different fields, i.e engineers, doctors, gemologist, art lover, stamp collector, etc.
specs (pls click to enlarge)
Model LT-86B (Hs- 609) / LT-86C (Hs- 606) / LT-86A (Hs- 616)
Voltage 220
Power 22W
Lens diameter 125mm
Lens available 3x, 5x, 8x, 10x
Adjustable Height 500mm / 700mm/ 1000mm/ 1000mm
Support Desk-top pole-supported/ Desk-top, folding arm/ Table-clamping, folding arm / Table-clamping, folding arm
Weight 2.9kg/ 3.2kg/ 3.2kg/ 3.2kg
Power factor: ≥ 0.93 Time of preheating (TP) ≤1.5s
Electric current distortion: THD <40% ----------------------------------------------------------------------------------- notes:
1. detailed view of the bf-600 model
2. mas maganda yung bf600 kesa sa model 616. yung bf 600 kasi is nakatago yung spring support. pero mas binibili ng clients yung model 616 kasi mas mura. Cost cutting! same lang naman kasi ang output.
3. pedeng mamili ng lens- 3x, 5x, 8x, & 10x, or 20x (special order).. mas lower cost at mas convenient gamitin tong magnifying lamp during soldering compared to microscope. mas binibili ng client ang 5x at 10x, pero merong ilan na gusto ang 8x.
4. yung ilaw nya pag napundi is pedeng paltan. bili ka lang sa hardware, o sa Ace Hardware sa SM or sa DIY ng 22W circular lamp. nasa 100 pesos lang yata ang isa. unlike kung microscope gamitin mo, pag napundi yung ilaw non,hirap humanap ng replacement.
ULTRASONIC CLEANER
-will not "harm" or damage or scratch delicate materials & things
ULTRASONIC CLEANER -ESD safe
1) Intelligent antistatic MCU control.
2) Auto stop operation.
3) LED time and power display.
4) Removed dirt, dust, grease and tin from tiny space and untouchable area by ultrasonic technology.
5) Use continuous high frequency 40KHz and filter power to have excellent performance. No damage in cleaning operation.
6) Stainless steel container and glass cover used is corrosion-resisting material keeping it durable.
7) Widely applied for repair centre (circuit board and component), jewelry shop (silver), optical shop (glasses), watch shop (metal bracelet), beauty shop (scissors, clip) and home user (denture), etc.
8) LVD (CE) safety passed.
2 MODELS TO CHOSE FROM:
1.HANSTAR 3050
2.HANSTAR UC-28
click the picture to enlarge to see the specs
-------------------------------------------------------------------------------------
notes:
1. We can also supply Bigger Ultrasonic Cleaner! just email us of your required size
AUTOMATIC TAPE CUTTER- Dispenser HANSTAR M-1000
HANSTAR M1000 Automatic Tape Cutter
Model: M-1000
* Ideal for use in medium production facilities where economy and labor savings are crucial to job success.
* Precise shearing length with clean and tidy cut surface.
* Less dirt in the operation due to finger imprints, keeping the stickiness of the adhesive tape
* Auto shearing, Less operation activities, less stress to the operators making them more efficient.
* Low cost
Specifications:
1) Applicable Tape width: 7mm to 50mm
2) Cut length: 20mm to 999mm
3) Display: 3 digits LED
4) Operation patterns: automatic and manual
5) Core diameter: 25mm, 32mm, and 75mm
6) Power supply: AC 110V/60Hz, AC 220V/50Hz
7) Dimensions: 137 (W) x 218 (D) x 150 (H) mm
8) Net weight: 2.4kg
9) Max power: 18w
10) Passed the CE certificate
Program a defined length and automatically advance and cut tape
Accepts tape widths from .28" to 2" (7 to 50 mm)
Cuts tape lengths from 0.79" to 39" (20 to 999 mm)
Photocell actuated feed & cut or push-button feed & cut
LED Digital length adjustment
Manual override of preset lengths
Blades good for up to 200,000 cuts (dependent on type of material)
Steel frame for durability
Cabinet made from flame retardant antistatic composite (auto ignition of 896°F/480°C)
Comes with a 3 in 1 core (3" (76mm), 35mm, 1” (25mm)
Adjustable pressure roller for different thickness’ of tape
Accuracy of tape length is +/– .04” (1mm) (dependent on type of material)
Many available accessories fit this machine.
Used in Manufacturing Plants World-Wide for 20 Years
Can cut:
battery lithium special-purpose tape, circuit board protection tape, the acetic acid fabric tape, glass cloth, high-temperature tape, protection membrane, fabrics-based tape, two-sided adhesive tape, kraft paper adhesive tape, patterned adhesive tape, the maral tape, fiber adhesive tape, etc.
-----------------------------------------------------------------------------------------
notes:
cross reference; XLT M1000 , ELM M1000
1. also known as tape dispenser
-improves productivity in the production
2. yung black controller na nasa harap is nandun yung cutter nya. me photo sensor dun. pag naglagay ka ng tape, mabablock nya yung light so automatic icucut nya yung tape na nakalagay sa tape dispenser. pede kang magset ng length ng cut nya.
3. the blades are consumable, & replacement blades can be sold separately
4. Instruction Manual & Parts list:
Video