Solar Power Meter Center 533

 

 

 

 

 

We are very glad to announce our new Solar Power Meter. Solar Power Meter is important to measure solar energy at PV (photovoltaic) plants. CENTER 533 can measure the energy and radiation that comes from the sun. It can quantify the sun’s energy on a specific surface accurately to optimize PV performance. Solar energy measurement unit is solar irradiance W/m2 or simply watts per square meter. The measuring data can help to build the PV plant with an optimal size and at the best location/ angle/ orientation.

 Key Specifications/Special Features

• 3 1/2 digits, 1999 count LCD
• W/m², BTU/(ft²*h) unit section
• Automatic power off (30 min)
• Data Hold function
• MAX/MIN function
• Detachable & rotatable light sensor
• Measuring range: 0.0~1999 W/m² ; 0.0~634 BTU/(ft²*h)
• Resolution: 0.1 ~1 W/m²; 0.1~1 BTU/(ft²*h)
• Spectral response: 400 ~ 1100 nm
• Over range: Display shows “OL”
• Accuracy:

Typical within ±10 W/m², ±3 BTU/(ft²*h) or ±5% whichever is greater in sunlight;

Additional temperature induced error (from 25°C)

±0.38W/m²/°C, ±0.12BTU/(ft²*h) /°C

• Response time: 0.5 sec
• Light detector: SI photodiode
  

Hand-held solar power meter with selectable between and W/m2 and BTU/(ft2*h) with 0.5 sec response time.

Features:

- Easy to use

- Data Hold function

- 1 W/m2, 1 BTU / (ft2*h) unit selection

- MAX/MIN function

- 3 1/2 digits, 1999 count LCD

Specifications:

- Measuring range: 20.0 to 199.9/1999 W/m2 20.0 to 199.9/634 BTU / (ft2*h)

- Resolution: 2 20.0 to 1W/m2, 0.0 to 1 BTU /(ft2*h)

- Accuracy: 2 2typically within +/- 10W/m2 [+/- 3 BTU / (ft2*h) ] or +/- 5% whichever is greater in sunlight

- Temperature characteristics: +/- 0.38W/m2/C [+/- 0.12BTU/(ft2*h)/C] from 25 C

- Response time: 0.5 sec

- Light detector: SI Photodiode

- Over range: OL display

- Power supply: 1.5V type AA battery x2

- Power life: Approx. 80 hours

- Operation temperature: 0 to 40 C (32 to 104 F)

- Operation humidity: 0 to 80% RH

 

 

Notes:

1. Instruction Manual

Top Performing- HANSTAR 946C high quality 946C Electronic hot plate preheat station 220/110V AC

SKU= HANSTAR-946C 

HANSTAR 946 Series Microcomputer Temp-controlled Heating Board is made from high quality integrative aluminum alloy, heat well-distributed, and won't deformation at high temperature. The heating board is controlled by CPU, accurately operate. It can automatically judge faults. CPU control temperature, very accurately * Easy to operate, auto judge fault

• High thermal efficiency, heating rapidly. * Board made from aluminum alloy, heat well-distributed  * Won't deformation at high temperature
• Plate size = 200 x200 x2 mm
• Digital read-out
• Easy to use
• Plate is made of Aluminum
• Temperature range is 50-350deg.C
• 800W,     Weight = 4.75 Kg
• 3 prong plug for safety & grounding
• Note : 946A (White) and 946C (Blue) is the same item, the only difference is color

Application: Used to divide, repair cell phone screen, LED display，Component heating work, SMD reengineering work,PCB removing,soldering  work

 

Warning:

1.  The table should be in tidy and the material must be heatproof

2.  When it’s working, should be careful to keep away from getting burned

3.  Pay attention to the heating element, high temperature will damage it.

4.  Do not use heating plate near the combustible and flammable objects.

5.  Do not move or touch the machine until it’s power off and cooling down .

6.  This machine is high temperature electronic product. In case of any accident happen, remember to cut off the power while not use it.

7.  It is for production use, but pls Do not use the machine in high temperature (up to 300 degree) for a long time.

 Usually, no more than 8h.

 

===

notes:

 

 

 

 

 

 

 

 

 

2. very very good quality & high performance, mabilis siya uminit at stable siya. Unlike mga ibang hot plate/ preheater ng ibang brands na ambagal uminit