Hanstar S905F

Soldering Iron- Hanstar S905F direct plug

direct plug to 220V
60W.
very powerful
quick heating
default maximum temp is 450 deg C. - but it can reach temperature of 500deg C upon adjustment of temperature controller inside

very powerful ,pantapat sa hakko mach- hakko 920, hakko 918, hakko 922

-------------
note:
1. ang factory settings nya is 450 deg C. pero pede mo iadjust yung temperature controller nya sa me PCB using the ceramic screwdriver to increase the temperature up to 500deg C.

FLUX / LIQUID DISPENSERS

capacity = 100ml
also called as : Flux Dispensing Needle Bottle




FLUX/LIQUID DISPENSERS
These leak proof flux/liquid dispensers are inexpensive. Dispenses a wide variety of liquids without dripping, spilling or waste. Bottles are 2 oz. polyethylene and have a 1” disposable stainless steel blunt needle. A .010” or .020” I.D. needle is included in the standard polyethylene and the static dissipative versions.

8016 ELECTRONIC HEAT GUN

8016 ELECTRONIC HEAT GUN

(HOT AIR BLOWER)

FEATURES:

Use this hot air gun for a wide range of projects. A durable and versatile tool, it can be used with a variety of mediums. The Hanstar Heat Gun 8016 features two fan speeds and a variable temperature setting for versatility in heating the painting surface. Because of these features, this hot air gun is particularly good for use with encaustic paints.

SPECIFICATIONS:

2 models:	8016	8016 LCD
Temperature Display:	none	With Digital LCD Temperature Display
Voltage:	220VAC	same
Frequency:	50-60Hz8016 ELECTRONIC HEAT GUN	same
Temperature:	60-600 deg C	same
Input consumption:	high: 1600W / low: 1000W	same

APPLICATIONS:

Great for: Applying heat to shrinking products - Curing epoxy and softening adhesives - Drying, thawing frozen pipes - Softening and molding plastics - Heating liquids and stripping paint.

For paint stripping (450 to 500 deg C) , the maximum speed and the maximum air flow is generally required - these settings are also needed for other jobs such as soldering plumbing joints and freeing rusty nuts. Other uses for the heat gun include:

• drying paint or varnish - 30 to 130 °C - care has to be taken as dust particles may be blown onto the paint/varnish.
• drying out damp wood (before filling or painting) - around 100 to 200°C.
• softening adhesive (such as when applying worktop edge trim or lifting floor tiles) - 300 to 400°C.
• bending plastic pipes - 200 to 300°C.
• heat-shrinking plastic film - 200 to 300°C.
• welding some plastics - 330 to 400°C.

The hot air gun can be applied to melt the paint, bend plastic pipes, shrink wrap, soften the glue to flip brick and so on. It will provide you the best decoration without any adverse effects, if you selected the appropriate temperature and the best distance. When the temperature goes high, the paint / plastic material of the object surface will be melted and easy to remove. To help cool the device and get extension of life, switch it from HIGH to LOW and blow for 16s when you stop using. Do not blow the hot air directly to human body in case of injury.

YIHUA PS-1501T

YH-1501TRegulated dc power supply
1.It have short circuit protection
2.can testing mobile RF informations

*YH-1501T Regulated dc power supply

Model No.	Pointer / LED	Adjust Current	Adjust Voltage
YIHUA PS-1502DD+	LED	0.6~2A	0~15V
YIHUA PS-1502D+	Pointer	0~2A	0~15V
YIHUA PS-1501T	Pointer	0~1A	0~15V
YIHUA PS-1501D+	Pointer	0~1A	0~15V
YIHUA PS-1501DA	Pointer	0~1A	0~15V
YIHUA PS-1502DD	LED	0.6~2A	0~15V
YIHUA PS-303D	LED	0~3A	0~30V
YIHUA PS-305D	LED	0~5A	0~30V

Primary Technical Parameter

1.The power supply input: we can make 110V,220V,230V,240V AC2.The biggest power : 25W max

3.Output voltage: 0-15V DC

4.Work temperture : 40^oC-70^oC

5.Empty carry to exhaust :

*MAIN FUNCTION

1.Output constant current adjustable.

2.Output constant voltage adjustable.

3.LCD voltage and currrent display.

4.Constant voltage and current operation in individual.

5.Over current protection.

6.Could be adjustable

The advantages of our Yihua DC power supply

1.High precision and good technique to protect the product Safety and reliability.
We are using advanced SAMSUNG IC control software. And in order to protect the product Safety and reliability, we put limit in the software.
(Some factory in order to save cost are using Analog Circuitry to do,so their precision Safety and reliability can not compete us.)

2.Good transformer
Our transformer are using good conductor and high efficient magnetic core.So we no need to make bigger transformer ,but can satisfied the DC power suppy.
(some of factory transformer material are less efficient that can not load, so they make them bigger. that cause the weight to be heavy and high value, so their ransformer can not compete us.)

Digital DC Power Supply 1502DD

Description features:1502DD has over-current protection function!
The power supply is designed for mobile phone, MP3 MP4 repair, with the protection for high-precision DC power supply, with high speed, protecting loading current and short circuit. (when excluded over-current or short-circuit fault, please turn on the on-off, it will work again). There are five different mobile phone interfaces and five different power supply output. This is convenient to repair different cell phone, MP3 MP4. Also there is dedicated power supply terminal. It can also apply to laboratories, schools and production line.
Other advantages: the power switch is the touch control, super-large voltage and current display. Metal shell, there are six voltage output options which are 1.5V 3.6V 4.8V 6V 7.2V 0 ~ 15V.
One of 0-15V voltage is freedom voltage which is facilitate for continuous adjustment button, adding a fine-tune function!
Other five options are convenient to repair mobile phones which can directly transferred the file, mobile phone repair option is 3.6V and 4.8V.
Please take good care of the device to exert its greatest advantage! a set of power lines is matched with power 1502DD .
Main parameters:
1voltage220V+-10% 50/60HZ
2working conditiontemperature-10~40 humidity 90%
3storagetemperature-20~40 humidity 80%
4power stability 0.01%+-20MV
5loading stability 0.01%+-2MV1MAV1A
6noise 0.5MVRMS5HZ-1MHZIOMAX 1A
7temperature coefficient 300PPM/


The advantages of our Yihua DC power supply

1.High precision and good technique to protect the product Safety and reliability.
We are using advanced SAMSUNG IC control software. And in order to protect the product Safety and reliability, we put limit in the software.
(Some factory in order to save cost are using Analog Circuitry to do,so their precision Safety and reliability can not compete us.)

2.Good transformer
Our transformer are using good conductor and high efficient magnetic core.So we no need to make bigger transformer ,but can satisfied the DC power suppy.
(some of factory transformer material are less efficient that can not load, so they make them bigger. that cause the weight to be heavy and high value, so their ransformer can not compete us.)

Anti-Static Finger Cots

1 bag = 10 gross = 1440 pcs
------------------
note: 1 Gross = 12x12 = 144
so 10 Gross = 1440pcs

Mini- Magnifying Lamp LT-86D

its magnification is 5x, but it also has the inside lens of 10x.
cheap but a very great tool

(Square) Rectangular Magnifying Lamp LT-86H ( 10x)

notes:
1. other end-users call them as "Square Magnifying Lamp" LT-86H ( 10x) .

CleanRoom Cotton Swab #78

 

  

Cleanroom Cotton Swabs- 78 for Industrial use

-about 93-95pcs / pack 

24packs / bag 

length = about 78mm ------ notes:

 ===

notes:

 1. kaya siguro tinawag na no. 78 to is dahil yung length nya is 78mm

CleanRoom Wipers

Cleanroom Wipers MAX WIP 1009D 9 inches x 9 inches Anti-static Amine Free 100% Polyester double knit 150pcs/ bag ------------------------- note: mabigat din tong cleanroom wipers nato, kasi 9" x 9" ba naman. its weight is about 0.75 Kg/ pack . 1 bag = 150 pcs

Lagunastar Magnifying Lamp

 

 
LT-86A circular magnifying lamp
LT-86B circular magnifying lamp
LT-86C circular magnifying lamp
LT-86D mini magnifying lamp
LT-86E circular magnifying lamp
LT-86F rectangular Magnifying Lamp
LT-86G rectangular Magnifying Lamp
LT-86H rectangular Magnifying Lamp
LT-86I rectangular Magnifying Lamp

INFRARED DIGITAL THERMOMETER 8530

Cheerman DT-8530= PHP3,720 EACH

Gun Type

SPECIFICATION

Temperature range: -20 ~ 530℃(-4 ~ 986℉)

Distance to Spot ratio: 12:1

Response time: less than 1 second

Spectral response: 5~14µm

Emissivity: 0.95 fixed

Resolution: 0.1℃ (0.1℉)

Laser output: ,1mW, wavelength 630~670nm, Class II laser product

Operating temperature: 0 ~ 50℃ (32 ~122℉)

Storage temperature: -20 ~ 65℃ (-4~149℉)

Relative humidity: 10% ~ 905 RH not condensing operating, ,80% RH storage

Power: 9V

Product size: 17.5*9*4 CM

Weight: 150g (including battery)

INTRODUCTION

The non-contact infrared thermometer is designed to be used to measure surface or skin temperature of a target object where as by conventional (contact) thermometer seems to be inappropriate (such as moving object, surface with live voltage or object which is hard to reach due to harsh environment).

SAFETY CAUTION

l Use extreme caution when the laser beam is switched on

l Do not let the beam aimed direct into people’s eyes

l Be careful not to let the beam reflect into your eyes from a mirror surface

l Do not allow the laser light beam exposed to inflammable or explosive gas

How it works

Infrared thermometers measure the surface temperature of an object. The unit’s optics sense emitted, reflected, and transmitted energy, which is collected and focused onto a detector. The unit’s electronics converts the information into a temperature reading, which is display on the unit. In unit that comes with a laser pointer, the laser serves only for aiming purposes.

Field of view

Make sure that the target is larger than the unit’s spot size. The smaller the target, the closer you should aim to the target. When accuracy is critical, make sure the target is at least twice as larger as the spot size.

Distance & Spot Size

As the distance (D) from the object increases, the spot size (S) of the area measured by unit becomes larger. The relationship between distance and spot size for each unit is listed below.

Locating a Hot Spot

To find a hot spot, aim the thermometer outside the area of interest, and then scan across with an up and down motion until you located hot spot.

Emissivity

Emissivity is a term used to describe the energy-emitting characteristics of materials. Most (90% of typical applications) organic materials and painted or oxidized surfaces have an emissivity of 0.95 (pre-set in the unit). Inaccurate readings will result from measuring shiny or polished metal surfaces. To compensate, cover the surface to be measured with masking tape or flat black paint. Allow time for the tape to reach the same temperature as the material underneath it. Measure the temperature of the tape or painted surface.

STORAGE & CLEANING

l The sensor lens is the most delicate part of the thermometer. The lens should be kept clean at all the time, care should be taken when cleaning the lens using only a soft cloth or cotton swab with water or medical alcohol. Allowing the lens to fully dry before suing the thermometer.

l Do not submerge any part of the thermometer.

l The thermometer should be stored at room temperature between -20 to 65 ℃ (-1 to 149℉)

FRONT PANEL LEGEND

INDICATOR

①. Low battery symbol

②. Data hole

③. Laser sign

④. ℃ / ℉ symbol

⑤. Current temperature value

REMINDERS

l Not recommended for use in measuring shiny or polished metal surface (stainless steel, aluminum, etc.).

l The unit cannot measure through transparent surface such as glass. It will measure the surface temperature of the glass instead.

l Steam, dust, smoke, or other particles can prevent accurate measurements by obstructing the unit’s optics.

BATTERY REPLACEMENT

The thermometer incorporates visual low battery indication as following:

l Battery sign will be shown when turn on the thermometer. If the battery is good, the sign will disappear after 3 seconds. If the battery sign is flicking, that means the battery is low power, please replace the battery then.

NOTE: It is important to turn the meter off before replacing the battery, otherwise the thermometer may malfunction. Dispose of the used battery promptly and keep away from children.

other models available:

INFRARED THERMOMETER（high temperature）Cheerman 8850

DT-8850 = PHP6,700 EACH

Gun Type
◆ Temperature Range: -50 deg C ～ 850 deg C

-58 deg F ～ 1562 deg F

◆ Accuracy ±2% or 2deg C
◆ Distance Spot Ratio 12:1
◆ Emissivity 0.1 to 1.0 adjustable
◆ Response Time & Wavelength 500ms & (8-14)um
◆ Repeatability ±1% or±1 deg C
◆ Resolution 0.1 deg F or 0.1 deg C

Avg/Dif Temperature Measurement √
Max/Min Temperature Measurement √
High/Low Temperature Alarm Setup √

◆ ℃/℉ Selection √
◆ Data Hold Function √
◆ Laser Target Pointer Selection √
◆ Backlight Display Selection √
◆ Auto Power Shut Off √
◆ Low Battery Indication √
◆ Power 9V Battery
◆ Color: Yellow + Grey

Cheerman 8380

Non-contact Infrared Thermometer DT-8380
Gun Type
◆ Temperature Range - 50deg C to 380degC

-58deg F ～ 716 deg F

◆Accuracy= ±2% or 2 deg C
◆ Distance Spot Ratio= 8:1
◆ Emissivity= 0.95
◆ Response Time & Wavelength : 500ms & (8-14)um
◆ Repeatability= ±1% or±1deg C
◆ Resolution =0.1 deg C or 0.1 deg F
◆ ℃/℉ Selection √
◆ Data Hold Function √
◆ Laser Target Pointer Selection √
◆ Backlight Display Selection √
◆ Auto Power Shut Off √
◆ Low Battery Indication √
◆ Power 9V Battery
◆ Product Color Yellow + Black

------------------------------------------------------------------------------------------------
notes:

1. What is the distance to spot ratio?

D/S Ratio- Distance to Spot ratio refers to a very important feature of your infrared thermometer.  This ratio is the size of the area being evaluated by the infrared thermometer as it relates to distance.  In other words, the area being measured becomes larger as the distance increases.  This has a profound impact on the accuracy or precision of the reading.  If the target you are measuring is 6 inches in size, and your infrared thermometer has a D/S ratio of 8:1, than the maximum distance you can reliably measure the temperature of the target is 48 inches.  Beyond this distance, not only is the target being measured, but whatever else falls within the "spot" is being measured as well.  This means that if a very hot object is the target, and it is in cooler surroundings, than measurements taken beyond the maximum distance will include cooler elements, and lowering the "average" of what is in the "spot".

D/S Ratio X Target Size,   or   8:1 X 6 = maximum measure distance of 48 inches.

As the target size decreases, or the distance to the target increases, a larger D/S Ratio becomes necessary.  Using the same example above, and changing first the target size, and then the D/S ratio, you can see that this formula helps you decide the correct D/S ratio and therefore the Infrared Thermometer for your needs.

D/S Ratio X Target Size,   or   8:1 X 2 = maximum measure distance of 16 inches.

D/S Ratio X Target Size,   or 12:1 X 2 = maximum measure distance of 24 inches.

D/S Ratios vary greatly, so carefully compare this feature of IR Thermometers when comparison shopping.  This ratio, and temperature range are the two biggest factors to consider when shopping for an Infrared Thermometer!

Ref : http://www.infraredthermometersale.com

INFRARED THERMOMETER (Low temperature) CHEERMAN DT 320

CHEERMAN DT-320= PHP2,500
Gun Type
◆ Temperature Range -50 deg C to 320 deg C
-58 deg F to 608 deg F
◆ Accuracy ±2% or 2 deg C
◆ Distance Spot Ratio 8:1
◆ Emissivity 0.95
◆ Response Time & Wavelength 500ms & (8-14)um
◆ Repeatability ±1% or±1 degC
◆ Resolution 0.1% or 0.1 degC
◆ ℃/℉ Selection √
◆ Data Hold Function √
◆ Laser Target Pointer Selection √
◆ Backlight Display Selection √
◆ Auto Power Shut Off √
◆ Low Battery Indication √
◆ Power 9V battery
◆ Product Color Yellow + Black

CHEERMAN DT 8280 Pen Type Infrared Thermometer

CHEERMAN DT 8280 Pen Type =PHP1,250 EACH

Temperature Range -50 deg C ～220 deg C
-58 deg F ～ 428 deg F

◆ Accuracy ±2% or 2C
◆ Distance Spot Ratio 1:1
◆ Emissivity 0.95
◆ Response Time & Wavelength: 500ms & (8-14)um
◆ Repeatability ±1% or±1 deg C
◆ Resolution 0.1 deg F or 0.1 Deg C
◆ deg C/ deg F Selection √
◆ Data Hold Function √
◆ Auto Power Shut Off √
◆ Low Battery Indication √
◆ Power 2pcs Cell button (1.5V/each)

How to Replace Heating Element for SMD rework "hot air" stations?

the 2 wires = for analog rework stations
the 4 wires = for digital rework stations or those hot air with digital temperature display

=============

How to Know if the Heating Element of your SMD rework hot air station is busted?

-->1. pls refer to page 7 of the hakko 850B manual. easy lang ang pagreplace ng heating element.
a good heater must have resistance of 70 -100ohms for 220V. if wala na sa ganyang range , busted heater siya & need to replace

a. open the handle

b. measure the resistance value using a multimeter

actual pics. click to enlarge. ang nakapicture dyan is a brand new heating element, na ipapalit sa busted heating element

ESD Alcohol Bottles (IPA dispensing bottle)

ESD Alcohol Bottles (IPA dispensing bottle)

Static dissipative dispensers come with a stainless steel pump with air tight check valve or Purity pump that protects against cross contamination by keeping fluid from returning to dispenser. Features an average surface resistivity of 10E9 to 10E10 ohms. and can dissipate a ±5000V charge in less that 2 seconds at 40% relative humidity.

These ESD safe polyethylene solvent dispensers are available in four standard sizes. These dispensers have neither a stopper nor a cap to remove. Just touch the dispensing dish with a brush cloth or applicator and solvent is brought to the surface instantly as needed. Stainless steel valves seal contents in bottle until used. The fluid pumps into the dish and it does not drip back into the bottle, keeping stored liquids uncontaminated.

Natural HDPE Bottles High density polyethylene suitable for many solvents. Square shape provides stability and saves storage space. Wide opening for easy fill. Translucent allows easy viewing of contents.

Anti-static bottle also with anti-reflux design, suitable for store some solvents, such as alcohol, carbinol. Suitable for medical, industry.

Surface resistivity of 10E7 to 10E9 Ω.
Available in #60 = 6 oz = 180 to 200 mL
Available in pink & white colors

---------------------------------------------------------------------------------
notes:
1. Usually yung 180ml (#60) na ESD bottle ang required ng clients at yung color Pink & White ang pinakamabili kaya to yung usually me maraming stock lagi kasi fast moving.