Automatic Tape Cutter- A2000

A2000

Input Voltage/Frequency：AC220V/50Hz, AC110V/60Hz
Power Consumption：35W
Room Temperature：5 deg C-40 deg C
Humidity of Environment：﹤80%RH
Dimension：W137*D218*H150mm
Weight：3000g

AUTOMATIC TAPE CUTTER- XLT RT 5000

RT5000

Input Voltage/Frequency：AC220V/50Hz, AC110V/60Hz
Power Consumption：35W
Room Temperature：5 deg C-40 deg C, Humidity of Environment：﹤80%RH
Dimension：W137*D218*H150mm, Weight：3000g

------------Features------------
1) Cut Length: 5-999mm
2) Tape Width: 5-50mm
3) Display: 3 Digital LED
4) Core Diameter: Any size available
5) Power Supply: AC220V/50Hz, AC110V/60Hz
6) Operation Patterns: Automatic and Manual

PC IONIZING AIR BLOWER- Hanstar 5600

HANSTAR PC (PERSONAL COVERAGE) Ionizing Blower
(model 5600)

FEATURES：
● Portable handle built-in cleaning unit.
● Eliminate electrostatic rapidly iron balance 0± 5V， (0± 3 V, 0± 10V, & 0 ± 15V are also available- Passed ESD STM3.1- 2007; IEC 61340-5-1 standard)
● Coverage range：1feet × 5 feet
● Low noise iron balance indication light, no step adjust speed.
● Input voltage 110V／60Hz，20V／50Hz
● Size: 140×220×80mm
SPECIFICATION：
Input voltage: AC 220V 50/ 60Hz
Limited power: 25W (warm air model-240W)
Ion balance: 0± 5V (instinct, have no use for adjusting)
Disappear speed: From 1000V to 100V, <1.5 seconds(most air volume)
Coverage range: 30cm×150cm
Ozone: <0.005ppm(15cm front of blower)
Operation temp: 0-50 deg C
Wind speed: 250-500FPM@30cm (continued adjust)
Output wind volume: 35-70CFM
Wind fan noise: 50- 57 dB @60cm
Display: light display while ions produced
Weight/volume: 2.4kg / 140×218×83mm
Accessories (optional): Dust filter net(300PPI Open Cell Polyurethane Foam)

Note: WE also make STAINLESS body PC IONIZING AIR BLOWER


-------------------------------------------
1. nakasale po now yung +/-15V namin na PC blower
2. Cross reference = Quick440A ionizing air blower

Aerostat XC Air Blower- Hanstar 5700

Aerostat XC Air BlowerHanstar 5700
Extended Coverage Blower

The Aerostat XC Extended Coverage Ionizing Air Blower provides excellent coverage, stability of balance, and rapid static charge decay times. The XC neutralizes static across an entire 3 x 6 ft bench top area.


SPECIFICATIONS：

Input voltage 230VAC 50/ 60Hz
Max. consumption 72W
Ion balance 0± 5V（automatic）Passed ESD－STM3.1-2007 ionization standard
Clear off speed From 1000V to 100V, <1.5sec.(Max. wind volume)

Area cover 90cm by 180cm
Ozone ＜0.005 ppm
Operating temperature 0-50 deg C.
Wind speed 600-1000FPM ＠30cm
Wind output 70 CFM at low fan speed, 95 CFM at medium fan speed, 120 CFM at high fan speed
Fan noise 52 to 64 dB @ 60cm
Display： Bright- ion by high voltage
Weight/Size 7.9kg/ 39.0cm*11.4cm*20.6cm
Packing Steel finished with Acrylic Enamel

HANSTAR 5800 -OVER-HEAD IONIZER- 3 FAN

HANSTAR 5800 -OVERHEAD IONIZING AIR BLOWER
Model 5800

Hanstar 5800 overhead blower is a member of Hanstar ionizing air blower, which is designed to provide target coverage for electrostatic problems.

DESCRIPTION:

1. The overhead ionizing blower produces an air flow that is rich in positive and negative ions. Directing the air flow on an object that has a static electricity charge will neutralize the charge.

2. The overhead ionizing blower has 3 small fans to produce air flow. The volume of air flow is controlled by a variable speed control which provides a wide range of air flow setting. The high voltage AC is applied to a circular arrangement of tungsten steel ion emitter points which results in an intense alternating electric field at the tips of the emitter points. It is this electric field that creates alternating polarity ions in the air flow. To assure that the unit is working properly, the high voltage AC is monitored by an ionization indicator lamp.

3. The overhead ionizing blower features a patented balancing circuit. Also features a patented built-in emitter point clear. Using the point clear takes only seconds. Cleaning the emitter points on a weekly basis prevents the build-up of airborne debris all electrical ionizers are prone to. This keeps your blower working in top form for the life of the unit.

4. The overhead ionizing blower was designed for use with sensitive electronic components, where electrostatic discharge is a problem. The 5800 can also be used where static electricity causes problems such as: attraction of dirt to product, misalignment of small parts due to electrostatic “jumping” and undesirable adhesion of plastic films due to electrostatic charge.

5. Widely used in the field of Data Storage Manufacturing, Electronics Assembly, Semiconductor Manufacturing, Pharmaceutical Plant, & in Explosives -Product Productions

FEATURES:

1. Three airflow output, cause huge air coverage.
2. Adjustable speed control for air flow rapidly neutralizes static charges.
3. Inherently balanced in output. Integrated blower and power supply.
4. Ionization indicator lamp.
5. Proven Anti-static capabilities ( Tested & is currently being used by many Electronics Factories in the China, Taiwan, Thailand, India,& in the Philippines)

SPECIFICATION:
Operating voltage 220V 50Hz / 60Hz
Current consumption 0.62A
Operating temperature 0-50℃
Air coverage 110cm x 120cm
Air volume 330CFM
Ion balance 0V +/-10V
Passed ESD STM3.1- 2007; IEC 61340-5-1 standard
Size 1100mm x 110mm x 184mm
Weight 11.7 Kg


Decay test results:
Testing conditions
Operating voltage = 110V/220V Testing voltage= 1KV to 100V Temperature: 22℃
Distance 300mm 600mm 900mm 1200mm
Left 300mm 1.8s 2.5s 5.2s 8.6s
Centre 1.3s 2.2s 4.3s 7.5s
Right 300mm 1.7s 2.3s 4.8s 8.3s

Remarks:
1. Distance measured in mm, decay time measured in seconds.
2. Test data from ME 268A charge plate analyzer.
3. Test figures are subject to the variation in the atmospheric conditions.

-----------------------------------------------------------------------------------------

notes:
1. lower cost alternative to Simco Overhead Ionizers. Sobrang Mahal ng mga Simco Ionizers. same output specs ng Simco.
2. during shipping, dapat walang light bulb, nababasag yung bombilya during shipping. Its up to the end-users kung lalagyan nila ng ilaw yung ionizer. Very easy lang naman lagyan ng ilaw to. Just unscrew the back cover then insert the light bulbs to the light bulb sockets. 2 pcs ang pedeng ilagay na light bulb dito. But usually hindi na nilalagyan ng clients kasi maliwanag na sa production area nila

Anti-Static Ionizing Gun Hanstar4000

HANSTAR 4000 IONIZING AIR GUN

● Eliminate electrostatic rapidly, cleans easily the sensitive components and materials.
● Handle is comfortable, weight almost 0.275kg (no cable)

● 4KV output voltage specification effectively
eliminate electrostatic.
●Input voltage：220V, 50/ 60Hz ( 110V is also available)

Wind-efficient electrostatic ionizing gun is a device that eliminates static ions by the high- pressure air to produce a lot of negative ions that quickly swept through the region of positive static ions. It is widely used in electronic assembly, electronics manufacturing emblem, biological products, pharmaceuticals, injection molding, printing industries.

Characteristic: Light and handy and carrying it conveniently, Dispel the static in the general range
effectively fast. The special-purpose power can drive 2 HBA guns at the same time.

* Working voltage: 4.0KV
* Working pressure: 0.3- 0.6mpa
Working condition: 0-45 deg C, R.H advisable (air pressure：2-3 bar）
Wind output : 3.5 CFM @0.7 bar, 5.3 CFM @3.5 bar
Ozone output : Meet OHSA safety standard
Weight: 0.275kg（gun body） Encapsulation: aluminum

Decay Time test results:

Testing conditions: RH= 60%, Temp= 22 deg C

Testing Voltage= 1 KV to 100V Operating Voltage= 220V / 110V

Decay time (seconds)

Ion Charge	Distance
	150mm	300mm	600mm	900mm
(+) positive	0.7s	1.5s	2.8s	3.4s
(-) negative	0.9s	1.9s	3.5s	4.5s

-----------
notes:
1. cross reference= TE0802 Ion Gun, Ionizing air gun, Ionizer gun , simco ion gun
2. ang isang standard power supply ay kayang magpower ng 2 ionizing air gun. meron special model ng power supply na kayang magpower ng 4 ion gun but its expensive & will require longer leadtime. also pagdating sa production area, it is sometimes not practical or not " worker friendly" if isang power supply lang ang pagkakabitan mo ng 4 ion gun. ang mas advisable talaga is yung standard power supply na 2 ion gun ang pwedeng ikabit.

Digital Thermometer for Industrial and Laboratory Use

Ceto 1310/1320 Thermometer

Specifications:
Measuring Range: -50 ℃ to 1300 ℃; -50 ℉ to 1999 ℉
Sensor: K Type thermocouple
Input: Single(1310), Dual (1320)
Resolution: 50 ℃ to 199.9 ℃...0.1 ℃
Accuracy: 50 ℃ to 199.9℃...0.2% rdg + 1 ℃
-50 ℉ to 199.9 ℉ ...0.2% rdg + 1 ℉
-50 ℃ to 1000 ℃... 0.3% rdg + 1 ℃
-50 ℉ to 1999 ℉ . ..0.3% rdg + 2℉
1000 ℃ to 1300 ℃..0.5% rdg + 1 ℃
(apply to mainframe only at 23℃±5 ℃)
Function: H Data Hold & Display ℃/ ℉ selection
0.1 o /1 o resolution selection
T1 & T2 dual points display
T1 - T2 differential
measurement : 3-1/2 digit LCD
Input Protection: 60V DC or 24 Vrms AC maximum input
voltage on any combination of input Connector.
Sampling Rate: 2.5 times/sec.
Operating Condition: 0 ℃ to 50 ℃ (32 ℉ to 122 ℉ ),
0 to 90% R.H. (0 to 35 ℃)
Power Source: one 9V battery
Size: 135mm(L)x72mm(W)x31mm(H)
Weight : 157g

* OPTIONAL TEMPERATURE PROBES
Model Range(Type K(CA) THERMOCOUPLE)
TP-K01 Bead -50℃ to 200 ℃/-58 ℉ to 392 ℉ General Purpose
TP-K02 Immersion -50 ℃ to 1000 ℃/-58 ℉ to 1832 ℉ Liquid or gels.
TP-K03 Surface -50 ℃ to 750 ℃/-58℉ to 1382 ℉

CETO CT6801A

CETO 902C Digital Thermometer
Specs: 3 1/2 LCD
ideal for measuring temperature of air, liquid, semi-solid etc.
K type thermocouple
with power ON/OFF slide-switch

range: -50 ~ +750 C
accuracy: +/- 0.75%
resolution: 1 deg C

power: 9V (6F22) x1
packing: gift box
Weight: 150g.

CETO 1319 TYPE K THERMOMETER
Type "K" Thermocouple Input.
With deg C & deg F switching.
Max / MIN Function.
Data Hold Function.
Flip-up stand.
Measuring Range: - 50oC ~ 1350oC , -58oF ~ 1999oF
Sensor : K Type Thermocouple
Input : Single Channel
Resolution : - 50oC ~ 199.9oC.....0.1oC , - 50oF ~ 199.9oF.....0.1oF
(Others 1oC/1oF)
Accuracy : - 50oC ~ 199.9oC... +/- (0.3%rdg + 1oC)
- 50oF ~ 199.9oF... +/- (0.3%rdg + 2oF)
- 50oC ~ 1000oC... +/- (0.5%rdg + 1oC)
- 50oF ~ 1999oF... +/- (0.5%rdg + 2oF)
1001oC ~ 1300oC... +/- (0.75%rdg + 1oC)
Temperature Coefficient : Less that 0.1 times the applicable accuracy
specification per oC (oF)
Input Protection : 60V DC or 24 Vrms AC maximum input voltage on any
Combination of input Connector
Sampling Rate: 2.5 times / sec
Operating / Storage Conditions: 0oC ~ 40oC <80%rh onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi3XAXsGCrET2WUXO4Jl4AizMuNeVQTi8-BSVA3Mk9tuRCic89RQKv6j7-7hIEnDIioGRXgl8X3jDRzzI7Kj5PyeFLlxE-3OtYgyZ7AyNKzdRW8wGIrHMqlyJfVpCtarLY5LaLI9-sNkpcr/s1600-h/100_0778.jpg"> Digital Thermometer Probes

Thermocouple Wires Type K (with mini-plug)

Thermocouple Wires with mini-plug (Hansin code= TP-01)
Type K
color of Standard Mini-PLug : yellow
length of the thermocouple wire type K : 1 m

Digital Thermometer Probe TP-01

Digital Thermometer Probes:
Type K
Accuracy : <400 deg C (0.75% ± 25 degC )
Specs:

PROBE MODELS:
model Application Temp Range
--------------------------------------------------------------------------------
TP-01 , TP-01A Measuring air temperature, Oven temp. -50 to 400deg C
---------------------------------------------------------------------------------
TP-02 , TP-02A Probe is Stainless Steel: -50 to 700deg C
TP-03 , TP-03A Suitable to measure air,
TP-04 oven temp, liquid, steam
-----------------------------------------------------------

Digital Body Thermometer (Waterproof)

CLINICAL Thermometer or Digital Body Thermometer (Waterproof)-big LCD
Model Number: DT-11A

Electronic Digital thermometer can quickly measure body temperature accurately. Compared with the traditional glass mercury thermometer, it has advantages such as EASY READING, QUICK RESPONSE, SAFE & ACCURATE MEASUREMENT, MEMORY & BUZZER ALARM, ETC. Also, it does not harm our environment as well as to the people because it contains NO MERCURY. It is suitable for family & hospital use. Very much recommended to be used in babies, children, & adult. Highly Recommended for Doctors, Nurses, Caregivers, Nursing Students, & Medical Personnel

Features:

- NO MERCURY, ACCURATE & FAST MEASUREMENT
- EASY TO USE & EASY TO READ LCD DISPLAY (no more “taktak!”)
- BREAK RESISTANT
- CHILD- SAFE PROBE
- WATERPROOF (DT-11A MODEL)
- LOW COST yet VERY GOOD QUALITY
- CE 0197 CERTIFICATION

Specs:
1) Display range: 32.0~42.0oC
2) Accuracy: ±0.1oC 3) Min. scale: 0.1
4) Measurement time (reference only, it differs from people to people):
a) 60±10 seconds in oral b) 100±20 seconds underarm
5) Beeper function 6) Auto shut-off to save battery
7) Battery: 1.5V button battery (LR/SR-41) – Usually last for 5- 7 years under normal usage
8) Size: 133 x 18 x 13mm 9) LCD: 20 x 7mm 10) N.W.: 9.0g
11) Memory: last measuring reading

How to measure:
1. Press power switch ON
2. Position sensor tip (just like ordinary mercury glass thermometer)
3. Wait for beeper sound
4. Read body temperature in the LCD display
5. Press power switch OFF

note: also called as- FEVER THERMOMETER,CLINICAL THERMOMETER

PRICE (SRP) = Php190 each
Wholesale Price Available
1 year Warranty
FREE SHIPPING IF YOU ORDER 5pcs or more!!!


---------------------------------------
note:
1. if normal household use, ang life ng battery is about to about 5years . but kung naubos na, ang replacement battery nito is very cheap, we can sell even at Php5 for 2 pcs.
then nakita ko sa website ng CDR-king, nasa 2pesos each lang yung SR41 or LR41 .

BLOOD PRESSURE METER (Upper Arm Digital Sphygmomanometer)

Automatic BLOOD PRESSURE Meter
MB-300B UPPER-ARM

Problem:

To take blood pressure, it is conventional practice for a doctor (or nurse or other trained operator) to wrap the cuff of a sphygmomanometer around a patient's arm. He then utilizes one hand to inflate the cuff by means of a squeeze bulb to impede the flow of blood to the arm, while with his other hand he holds the sensor of a stethoscope on the patient's arm to monitor heart pulses acoustically. Using his first hand, the doctor then slowly bleeds air from the cuff to gradually decrease the pressure in the cuff while carefully observing the pressure gauge (aneroid or mercury column) of the sphygmomanometer. As the pressure in the cuff decreases he observes and mentally retains the pressure gauge readings at which the first heart pulse is heard (systolic pressure) and at which the heart pulses cease to be heard (diastolic pressure). It is common for the doctor or operator to repeat this process one or more times either to confirm the initial readings in the event that he may not have been able to clearly detect the systolic and diastolic pressure points, or to minimize the uncertainty of this type of measuring system, or to average the results, or to re-affirm the results in the event of loss of concentration or failure to remember of the observed readings.
It is clear that due to the inherent lack of precision with this type of medical measurement system, the results vary significantly from operator to operator. Additionally, this instrument is slow, needs much subjective judgment in interpreting the results, is cumbersome to use, and does not easily adapt itself for use by an average patient in taking his own blood pressure.


Solution:

A digital sphygmomanometer has a conventional arm cuff and a compact high sensitivity pneumatic sensor measuring system utilizing mechanical/optical/electronic techniques rapidly and accurately converts one's blood pressure to encoded digital signals which provide dual latched three digit displays of systolic and diastolic pressures with countdown in 1 mm Hg or 0.1 KPa increments on the respective displays of cuff pressure as it is decreased to systolic pressure and as it is decreased from systolic to diastolic pressure.

Advantages:

Digital BP meter can easily & accurately measure Blood Pressure. Compared to the aneroid or mercury column type of sphygmomanometer, it automatically measures blood pressure without the need for conventional manometers or stethoscopes. Also, it‘s easy to set up and use by an operator or by the patient himself to rapidly and accurately measures BP. You don’t need a medical skill to measure BP. MB-300A BP meter can also measure heart/ pulse rate accurately & easily. It’s safe to you & to the environment since it doesn’t have Mercury. It’s Low Cost, yet Good Quality. It’s Highly Recommended for Doctors, Nurses, Caregivers, Nursing Students, Medical Personnel, & to common people wishing to monitor their own BP at home or at work.

1) Measuring range: 0-300mmHg/ 0-40.0kPa
2) Measuring accuracy: ±0.4kPa/ ±3mmHg
3) Min. scale: 0.1kPa/1mmHg
4) Memory: 60 group memories
5) Auto shut-off (30sec after idle)
6) Date and clock
7) Battery life: approx. 2 months (at 3min per day)
8) Size: 150 x 105 x 55mm
9) N.W.: 180g (including battery)
10) Passed CE Certification

1 year warranty
Selling Price (SRP) : Php2,650
Free 4pcs AA Alkaline batteries (you can use also AC/ DC adaptor 500mA)
FREE SHIPPING ALL OVER the Philippines via LBC or Air21!!!

Wholesale Price Available!

note: also called as Digital Sphygmomanometer

Wrist Digital Blood Pressure Meter

Automatic Blood Pressure Meter
Model: MW-300 (WRIST TYPE)

-JUST PUT IN YOUR WRIST, SIT DOWN,
PUT YOUR WRIST (PULSO) AT THE SAME LEVEL
AS YOUR HEART, & PRESS ON…

1) Measuring range: 0-300mmHg
2) Measuring accuracy: ±0.4kPa (3mmHg)
3) Min. scale: 0.1kPa (1mmHg)
4) Memory: 60 group memories
5) Auto shut-off (30sec after idle)
6) Battery: AAA x 2, alkaline batteries
7) Battery life: approx. 2 months (at 3min per day)
8) Size: 65 x 78 x 28mm
9) N.W.: 128g (including battery)

also called as: Wrist Digital Sphygmomanometer

SELLING PRICE (SRP): PHP1,850 each
1 year WARRANTY
FREE!!! 2pcs AAA alkaline battery
FREE SHIPPING All over the PHILIPPINES via LBC!!!

Wholesale Price is also Available!

Sulfur-Free Paper

Instruction for this product:

This product is used for avoiding the silver in the electroplating
finished and the sulfurs in the air come into being a chemical
reaction, resulting products discolored. So when the product is
finished, it should be packed as soon as possible with sulfur-free
paper, wearing sulfur-free glove to touch the product, and can
not touch the electroplating surface either.

Technical Parameters
1、GSM Specification：17 GSM (1094 x 787 mm)、
30 GSM (800 x 1030 mm) 、
40GSM (1094 x 787 mm)
2、Sulfur dioxide≤50ppm
3、Sticky tape test： No falling hair phenomenon.

Storage Condition and Duration:
Be stored in dry and clean storeroom with 18℃～25℃, away
from fire source, water source, and prevent direct sunshine. Seal
packaging, durability for one year.

1 BAG= 500pcs

Daily Maintenance inspection for Station-type soldering irons

Daily Maintenance inspection for
Station-type soldering irons

(Using SOLDERING TESTER 192 & THERMOMETER 191)


Tools Needed:
1. Hanstar-Hansun 191 thermometer
2. Hoslen-SLD 192 thermometer tester with built-in surface resistance tester
3. 191- 212 or 191- 211 sensor
4. Hansun 199 (FG-100)
5. Thermocouple wire type K with plug

Objective:
Prevent device damage and soldering failure

The Hoslen-SLD 192 measures tip temperature, leak voltage and tip-to-ground resistance & surface resistance. Hanstar 191 measures tip temperature. Every soldering operator should have one on their workbench to ensure their soldering equipment is operating properly at all times.

Procedure:

Inspection 1. Checking the leak voltage
(using Hoslen-SLD 192)

Inspection 2. Checking the tip-to-ground resistance
(using Hoslen-SLD 192)

Inspection 3. Checking the tip temperature
(using Hanstar-Hansun 191 or 199 (fg-100))

Inspection 1. Checking the leak voltage (using Hoslen 192)

The following factors cause electric current to be leaked from the tip to the P.W.B. and the device, resulting in adverse effects on objects being soldered. For this reason, check the leak voltage periodically.
• Even though an insulative ceramic material is used, long-term use has caused the heating element to deteriorate and the leak voltage to increase.
Accumulation of oxides on the parts such as tip/element cover caused contact failure to be generated and leak voltage to increase.

How much leak voltage is normal?
The lower the leak voltage, the better. The MIL standard which has been abolished at present specifies that the leak voltage is designated to be lower than 2mV; therefore, all Hanstar station-type soldering irons have been delivered with the leak voltage set to 2mV or less in conformance to the MIL standard. The MIL standard is a US military-based standard and the standard MIL-STD 2000A regarding soldering irons has been abolished.
Point for measuring the leak voltage

Measure the leak voltage after adjusting the temperature setting to the maximum. When the leak voltage is measured at the highest temperature, the highest leak voltage will be recorded. If normal results are obtained even in unfavorable conditions such as at the highest temperature, it is judged that normal results will be obtained at other temperature settings. (This method is based on the MIL standard.)

If the leak voltage is higher, what actions should be taken?
1. If the heating element has deteriorated
- Replace the heating element with a new one. The heating element will be oxidized and blackened in this case.

2. If oxides have accumulated on other parts
- Remove oxides with steel wool (Tinsel Tip Cleaner Top S-603). An oxidized tip causes the wetting characteristics to deteriorate. The chemical is convenient to use for recovering the tip wetting characteristics.

Inspection 2. Checking the tip-to-ground resistance

When Oxide and flux stuck on the tip, the element cover and nut will cause the tip-to-ground resistance to become higher. As a result, the leak voltage will become higher; therefore, periodically check the tip-to-ground resistance.

* For the tip-to-ground resistance, let the current temperature increase to the set temperature to make the temperature stable before measurement.

How much tip-to-ground resistance is normal?
As with leak voltage, the lower the tip-to-ground resistance, the better.
The MIL standard which has been abolished at present specifies that the resistance is designated to be lower than 5Ω; therefore, all HANSTAR station-type soldering irons have been delivered with the resistance set to 2Ω or less which is stricter than that of the MIL standard.

If the tip-to-ground resistance is higher, what actions should be taken?
Polish the contact sections such as the tip and element cover with sandpaper, steel wool, etc. to remove any oxide films. An oxidized tip causes the wetting characteristics to deteriorate. A soldering chemical paste is convenient to use for recovering the tip wetting characteristics.


Inspection 3. Checking the tip temperature

If the tip, element cover, etc. are oxidized, heat conduction will be deteriorated, causing the tip temperature to become lower, resulting in soldering failure. To prevent soldering failure, measure the tip temperature daily.

*Tip temperature can be measured by Hoslen- SLD 192 ,& HANSTAR-HANSUN191 &199 (FG- 100)

The indicated tip temperature may be lower than the actual temperature due to other factors.

Other Accessories:
PROBE A1310 - THERMOCOUPLE PROBE USED FOR SOLDER POT
A1310 Temperature probe

note: HET acknowledge www.hakko.com for many of the information listed here

Soldering Tester Hoslen - SLD 192

Soldering Thermometer & Tester HOSLEN-SLD 192 with built-in surface resistance tester



HOSLEN-SLD 192 actual picture in its carrying case

Hoslen- SLD 192

Hoslen- SLD 192
Soldering thermometer tester with built in surface resistance tester ( 5 in 1 tester!)

FEATURES:
● Accurately measures: Temperature of Soldering iron tip,
Leak electricity voltage
Grounding resistance
Surface resistance
Temperature of Soldering Pot or any Liquid
● Meet MIL-STD-2000 standard
● Measure actual trms
● Wide temperature range, high accuracy.
● Inspection result can output to monitor.
● Easy replaceable temperature sensor ensures accuracy (hakko 191-212 sensor
- A good and low cost alternative to Hakko Fg-101

SPECIFICATION: SLD-HOSLEN 192

Temperature decompounds 1 deg C
range 0 ~ 600 deg C
accuracy ± 3deg C (300-500 deg C)
sensor K(CA)Thermocouple(Φ0.2mm)


VOLTAGE Resolution 0.1mV
range 0 ~ 90mV (AC)
accuracy ± (5% + 1 digit)
Accord with MIL-STD-2000standard

RESISTANCE resolution 0.1 Ω
range 0 ~ 90Ω
accuracy +/- (5%+1 number)
DISPLAY indication liquid crystal 3.5 digits
SURFACE RESISTANCE Measure range 103 -1012 ohm/sq
Accuracy ±0.5

MONITOR OUTPUT temp 1mV/°C
voltage 10mV/mV
resistance 10mV/Ω
POWER CONSUMPTION 1W
SIZE About 245(W) X 50(H) X 120(D) mm
WEIGHT about 1.1kg
OPERATING ENVIRONMENT 0 ~ 40 deg C, RH = 0 ~ 80%
Accessories AC/DC adaptor plug (220V) , carrying case, manual, ground wire

THERMOMETER SENSOR 191-212

Peso-Dollar Exchange Rate

Peso-Dollar Exchange Rate Official Government Rate
As of February 13, 2009 5:22 PM :

PhP47.120 = USD1.00
1 US Dollar (USD) = 6.84970 Chinese Yuan Renminbi (CNY)
1 Chinese Yuan Renminbi = 6.92329 Philippine Peso

1 Singapore Dollar = 31.34525 Philippine Peso
1 Taiwan Dollar = 1.39093 Philippine Peso
1 Hong Kong Dollar = 6.09915 Philippine Peso
(source: business.inquirer.net/forex)

Soldering Thermometer model 191

HANSIN THERMOMETER 191
FEATURES:
- With CA sensors that precisely measure the temperature of soldering iron tip - With Large liquid crystal digital display - Easy to replace sensor - Low battery & sensor alarm display function. - Latest design can be used to measure the temperature of solder pot & the inner temperature of other liquids and solids by use of a probe. -

FREE!!! 10pcs Thermometer sensor (191-211 or 191-212) &
thermocouple wire type K with mini plug (Hansin 191-KWP- for liquid temp.- for Blue 191 model only)

specifications:
Item no.: 191
Resolution: 1deg C
Measure Range: 0 to 600 deg C
Sensor: K(CA)Thermocouple(Φ0.2mm)
Accuracy: ±3deg C
Indicate: a) 3.5digital indicator. b)Battery alarm
Power: DC 9V dry battery
Service life: more than 150 hours
Working Room Temperature: 0-40 deg C
Size: 160(W)×45(H) ×80(D)mm
Weight almost: 200g
Design portable handle

Other Accessories:
PROBE A1310 - THERMOCOUPLE PROBE USED FOR SOLDER POT
A1310 Temperature probe


sensor: part no. Hakko 191-211 / 191-212
THERMOMETER SENSOR 191-212

*Soldering thermometer sensor, 191-212 / 191-211

1 pack = 10pcs ,
-Sensor replacement is quick and easy

*RANGE= 0 to 600 deg C *Fast accurate tip temperature measurements using a fine CA wire sensor (dia. 0.2).

*Used in soldering thermometers model 191, 192. fg-100, fg-101, 199

Thermocouple Wires Type K (with mini-plug)
thermocouple wire with mini-plug for 191 thermometer.JPG

-used to measure liquid temp (insert to 191 blue) like solder pot liquid bath
- can be used for thermal profiling
-used as thermometer sensor for digital thermometers

Thermocouple Wires with mini-plug
Type K
color of Standard Mini-PLug : yellow
length of the thermocouple wire type K : 1 m

Instruction Manual of Soldering Thermometer model 191

SOLDER WIRE REEL STAND-DISPENSER

solder wire stand dispenser ST-98 with solder wire ST- 98 ST-98 BOX PACKAGING SOLDER WIRE REEL STAND-DISPENSER ST-98 -ESD SAFE by Design -Keeps your work table neat by drawing out the solder wire smoothly, thus improving your productivity. -Passed China Testing Alliance It helps technicians immediately locate and access the end of the solder strand when it is needed without having to search around the bench saving time and frustration. It features non-skid rubber feet to keep your unit securely in place when you pull and draw the solder. Specs: Outer Dimensions: 87mm H x 89mm L x 98mm D Shaft Dia: dia 15mm Usable Solder: 1 Kg Roll Bobbin (Max) x1 Weight: about 0.4Kg net Colors available: Black & Yellow LOW COST SOLDER WIRE STAND model 611 (yellow color) ALSO AVAILABLE