Continuos Wrist Strap On-line Monitor (Single) Surpa 518-1

Surpa 518-1

 

 

  

Surpa 518-1

Wrist Strap On-Line Monitor Single port

High-tech, highly reliable, easy and convenient Electrostatic Field Meter.  It draws static from the human body continuously and has an instant warning with lamp and alarm to warn the user should the wrist strap fails or the grounding is disconnected.

Features:

·         No checking is required

·         Instant warning of wrist strap failure, improve production quality

·         Small and handy

·         For your convenience, you can use any wrist strap with banana plug in the market

Specification:

·         Input   -- 6V DC

·         Material – polystyrene

·         Dimension – 67*60*29 (mm)

·         Weight – 60gm(not including power supply adaptor)

Monitoring range on operator

Low:   800K>R       yellow LED glitter with audible alarm
Pass:  800
High:   R>35M       red LED flash with audible alarm
Accuracy: +/-10%

Input: 220V AC/50HZ, output: 9-12V DC/200mA

Input: 120V AC/50HZ, output: 9-12V DC/200MA

===

notes:

1. other photos :

 2. Dual port is also available

Wrist Strap On-line Monitor (Single) KINGSOM 518-1

KINGSOM 518-1

 

 

Wrist Strap On-Line Monitor Single port

High-tech, highly reliable, easy and convenient Electrostatic Field Meter.  It draws static from the human body continuously and has an instant warning with lamp and alarm to warn the user should the wrist strap fails or the grounding is disconnected.

Features:

·         No checking is required

·         Instant warning of wrist strap failure, improve production quality

·         Small and handy

·         For your convenience, you can use any wrist strap with banana plug in the market

Specification:

·         Input   -- 6V DC

·         Material – polystyrene

·         Dimension – 67*60*29 (mm)

·         Weight – 60gm(not including power supply adaptor)

Monitoring range on operator

Low:   800K>R       yellow LED glitter with audible alarm
Pass:  800
High:   R>35M       red LED flash with audible alarm
Accuracy: +/-10%

Input: 220V AC/50HZ, output: 9-12V DC/200mA

Input: 120V AC/50HZ, output: 9-12V DC/200MA

HANSIN/ HANSTAR/ EXALT 498- Wrist Strap Tester

Hansin-Hanstar 498- Wrist Strap System Tester

Used to check wrist straps and ground cords, as well as the contact resistance between wrist strap and skin. To operate, simply connect the tester to the ground cord of the wrist strap assembly, and press the finger pad. If the wrist strap and ground cord are working properly (resistance between 500KΩ and 10MΩ), the green "GOOD" lamp will light up and an audible signal will be heard. A lit red "HIGH" lamp, with no audible signal heard, indicates loose contact between wrist band and skin (resistance greater than 10MΩ). A lit red "LOW" lamp, with no audible signal heard, indicates a faulty ground cord resistor (resistance less than 500KΩ). It Comes with 8-ft. grounding wire and 9V battery.

Features:
• Can be used anywhere for quick and easy checking variety of grounding systems.
• Ensures employee safety.
• Eliminates product defects caused by static electricity.
• Battery operated (included)

Specifications
Power Supply 9V Dry Battery

LED Indication Calibration Resistance Buzzer
LOW (Red) R <> 9M ohm OFF

Note: The tolerance in resistance is set to 0 +10% for the
Lower Limit of 800 KiloOhm and -10% to 0 for the upper limit of 9 MegaOhm
-----------------------------------------------------------------------------------------
notes:
1. the Manual

===============

Wrist Strap System Tester EXALT 498

 Used to check wrist straps and ground cords, as well as the contact resistance between wrist strap and skin. To operate, simply connect the tester to the ground cord of the wrist strap assembly, and press the finger pad. If the wrist strap and ground cord are working properly (resistance between 500KΩ and 10MΩ), the green "GOOD" lamp will light up and an audible signal will be heard. A lit red "HIGH" lamp, with no audible signal heard, indicates loose contact between wrist band and skin (resistance greater than 10MΩ). A lit red "LOW" lamp, with no audible signal heard, indicates a faulty ground cord resistor (resistance less than 500KΩ). It Comes with 8-ft. grounding wire and 9V battery.

Features:
• Can be used anywhere for quick and easy checking variety of grounding systems.
• Ensures employee safety.
• Eliminates product defects caused by static electricity.
• Battery operated (included)

Specifications
Power Supply 9V Dry Battery

LED Indication Calibration Resistance Buzzer
LOW (Red) R <> 9M ohm OFF

Note: The tolerance in resistance is set to 0 +10% for the
Lower Limit of 800 KiloOhm and -10% to 0 for the upper limit of 9 MegaOhm

 

 

 

https://www.youtube.com/watch?v=kG4tiBTbIS4