Chemtronics CTAR-12 Konform® AR Acrylic Conformal Coating ( made in USA)

Konform® AR Acrylic Conformal Coating

CTAR-12 =  11.5 oz. (429 ml) aerosol

Lagunastar SKU=  CHEM-CTAR-12

Konform^® AR is ideal for providing insulation against high-voltage arcing and corona shorts. This extremely effective acrylic conformal coating provides a hard, durable protective barrier against humidity, salt, corrosive vapors and fungus for printed circuit board and electronic assemblies. Konform^® AR resin meets MIL-I-46058C, Type AR.

FEATURES & BENEFITS

• Acrylic coating working temperature from -75°F/-59°C to 279°F/137°C
• High dielectric strength of 8300 volts/mil
• Meets Mil-I-46058C, Type AR
• Compliant to IPC-CC-830A
• RoHS Compliant
• Provides excellent acid resistance
• Will not discolor over time under normal use
• Easily repairable
• Contains a UV indicator for thorough Quality Control inspection
• UL Recognized, File E76307

APPLICATIONS

• Extends component life by protecting against adverse environments
• Resists moisture, salt, fungus, corrosive vapors, and severe environments
• Designed to provide effective insulation against electrical shorts and harsh environments

 sizes: 

CTAR-12 =  11.5 oz. (429 ml) aerosol

CTAR-1 = 1 gal / 3.7 L container

---

notes:

1. Additional actual photos for CTAR-12

 

2. 

Ang full curing time po ng lahat ng Konform products is 24 hrs @ room temp. Wala na pong mas mabilis pa kahit po anong brand,

Pero kung tack free time...15 mins po tack free time sa Konform SR na quoted po namin.

ang pinakamabilis tack free time is 10 mins sa Konform Ultra ( by order only, medyo mahal po siya)

---

Tack-free time (TFT) is a measure of a surface cure time during the application of a substance such as a coating or sealant. It is the time at which the coating is deemed to be properly adhered and capable of providing maximum protection to a surface without being disrupted or damaged (google)

Circuitworks Overcoat Pen CW3300G

 CircuitWorks® Overcoat Pen

The pen dispenser for precise application of a tough protective acrylic conformal coating

·  Simple to use, single component system

·  Hard, durable coating

·  High dielectric strength helps prevent electrical discharge

·  Dries quickly at room temperature

·  Protects against moisture and abrasion damage

·  Meets requirements of MIL-I-46058C and IPC-CC-830A

·  Choice of clear, blue or green coating

Applications:

·  Protects conductive pen traces

·  Repairs permanent solder mask with conformal coating

·  Prevents shorting and arcing

CW3300C Clear 4.9 g (0.16 oz)
CW3300G Green 4.9 g (0.16 oz)
CW3300B Blue 4.9 g (0.16 oz)
CW3300BLACK Black 4.9 g (0.16 oz)

Origin = USA

 ============

Notes:
It is used to provide insulation of printed circuit boards, typically after rework and repair, where it can take the place of permanent solder mask, solder resist or conformal coating. It was designed to insulate printed circuit board tracks, traces and components against high voltage arcing. It also provides protection from moisture and fungus. The pen configuration is useful for rework when precision application is necessary.

Applications

• Touch-up and rework & repair of printed circuit boards
• Replacement of permanent solder resist or mask
• Repair of membrane switch keypads

Directions
Use the Overcoat Pen for the protection of repaired tracks. Depress the pen on hard surface continuously until material is released and starts to flow. Generously apply material over the repair surface. Make sure to overlap onto the original coating to ensure full coverage of application. Allow 24 hours for complete cure at room temperature. For accelerated curing, place in oven for 20 minutes at 50°C, and then again for 30 minutes at 82°C.

Ref: http://www.chemtronics.com/msdstds/results.asp , http://www.intertronics.co.uk/products/tec2508.htm

 notes:

1. Equivalent product=  TechsprayTEC2509-GN          Overcoat Pen Green - 5ml