Anti-Static Finger Cots

1 bag = 10 gross = 1440 pcs
------------------
note: 1 Gross = 12x12 = 144
so 10 Gross = 1440pcs

Mini- Magnifying Lamp LT-86D

its magnification is 5x, but it also has the inside lens of 10x.
cheap but a very great tool

(Square) Rectangular Magnifying Lamp LT-86H ( 10x)

notes:
1. other end-users call them as "Square Magnifying Lamp" LT-86H ( 10x) .

CleanRoom Cotton Swab #78

 

  

Cleanroom Cotton Swabs- 78 for Industrial use

-about 93-95pcs / pack 

24packs / bag 

length = about 78mm ------ notes:

 ===

notes:

 1. kaya siguro tinawag na no. 78 to is dahil yung length nya is 78mm

CleanRoom Wipers

Cleanroom Wipers MAX WIP 1009D 9 inches x 9 inches Anti-static Amine Free 100% Polyester double knit 150pcs/ bag ------------------------- note: mabigat din tong cleanroom wipers nato, kasi 9" x 9" ba naman. its weight is about 0.75 Kg/ pack . 1 bag = 150 pcs

Lagunastar Magnifying Lamp

 

 
LT-86A circular magnifying lamp
LT-86B circular magnifying lamp
LT-86C circular magnifying lamp
LT-86D mini magnifying lamp
LT-86E circular magnifying lamp
LT-86F rectangular Magnifying Lamp
LT-86G rectangular Magnifying Lamp
LT-86H rectangular Magnifying Lamp
LT-86I rectangular Magnifying Lamp

INFRARED DIGITAL THERMOMETER 8530

Cheerman DT-8530= PHP3,720 EACH

Gun Type

SPECIFICATION

Temperature range: -20 ~ 530℃(-4 ~ 986℉)

Distance to Spot ratio: 12:1

Response time: less than 1 second

Spectral response: 5~14µm

Emissivity: 0.95 fixed

Resolution: 0.1℃ (0.1℉)

Laser output: ,1mW, wavelength 630~670nm, Class II laser product

Operating temperature: 0 ~ 50℃ (32 ~122℉)

Storage temperature: -20 ~ 65℃ (-4~149℉)

Relative humidity: 10% ~ 905 RH not condensing operating, ,80% RH storage

Power: 9V

Product size: 17.5*9*4 CM

Weight: 150g (including battery)

INTRODUCTION

The non-contact infrared thermometer is designed to be used to measure surface or skin temperature of a target object where as by conventional (contact) thermometer seems to be inappropriate (such as moving object, surface with live voltage or object which is hard to reach due to harsh environment).

SAFETY CAUTION

l Use extreme caution when the laser beam is switched on

l Do not let the beam aimed direct into people’s eyes

l Be careful not to let the beam reflect into your eyes from a mirror surface

l Do not allow the laser light beam exposed to inflammable or explosive gas

How it works

Infrared thermometers measure the surface temperature of an object. The unit’s optics sense emitted, reflected, and transmitted energy, which is collected and focused onto a detector. The unit’s electronics converts the information into a temperature reading, which is display on the unit. In unit that comes with a laser pointer, the laser serves only for aiming purposes.

Field of view

Make sure that the target is larger than the unit’s spot size. The smaller the target, the closer you should aim to the target. When accuracy is critical, make sure the target is at least twice as larger as the spot size.

Distance & Spot Size

As the distance (D) from the object increases, the spot size (S) of the area measured by unit becomes larger. The relationship between distance and spot size for each unit is listed below.

Locating a Hot Spot

To find a hot spot, aim the thermometer outside the area of interest, and then scan across with an up and down motion until you located hot spot.

Emissivity

Emissivity is a term used to describe the energy-emitting characteristics of materials. Most (90% of typical applications) organic materials and painted or oxidized surfaces have an emissivity of 0.95 (pre-set in the unit). Inaccurate readings will result from measuring shiny or polished metal surfaces. To compensate, cover the surface to be measured with masking tape or flat black paint. Allow time for the tape to reach the same temperature as the material underneath it. Measure the temperature of the tape or painted surface.

STORAGE & CLEANING

l The sensor lens is the most delicate part of the thermometer. The lens should be kept clean at all the time, care should be taken when cleaning the lens using only a soft cloth or cotton swab with water or medical alcohol. Allowing the lens to fully dry before suing the thermometer.

l Do not submerge any part of the thermometer.

l The thermometer should be stored at room temperature between -20 to 65 ℃ (-1 to 149℉)

FRONT PANEL LEGEND

INDICATOR

①. Low battery symbol

②. Data hole

③. Laser sign

④. ℃ / ℉ symbol

⑤. Current temperature value

REMINDERS

l Not recommended for use in measuring shiny or polished metal surface (stainless steel, aluminum, etc.).

l The unit cannot measure through transparent surface such as glass. It will measure the surface temperature of the glass instead.

l Steam, dust, smoke, or other particles can prevent accurate measurements by obstructing the unit’s optics.

BATTERY REPLACEMENT

The thermometer incorporates visual low battery indication as following:

l Battery sign will be shown when turn on the thermometer. If the battery is good, the sign will disappear after 3 seconds. If the battery sign is flicking, that means the battery is low power, please replace the battery then.

NOTE: It is important to turn the meter off before replacing the battery, otherwise the thermometer may malfunction. Dispose of the used battery promptly and keep away from children.

other models available:

INFRARED THERMOMETER（high temperature）Cheerman 8850

DT-8850 = PHP6,700 EACH

Gun Type
◆ Temperature Range: -50 deg C ～ 850 deg C

-58 deg F ～ 1562 deg F

◆ Accuracy ±2% or 2deg C
◆ Distance Spot Ratio 12:1
◆ Emissivity 0.1 to 1.0 adjustable
◆ Response Time & Wavelength 500ms & (8-14)um
◆ Repeatability ±1% or±1 deg C
◆ Resolution 0.1 deg F or 0.1 deg C

Avg/Dif Temperature Measurement √
Max/Min Temperature Measurement √
High/Low Temperature Alarm Setup √

◆ ℃/℉ Selection √
◆ Data Hold Function √
◆ Laser Target Pointer Selection √
◆ Backlight Display Selection √
◆ Auto Power Shut Off √
◆ Low Battery Indication √
◆ Power 9V Battery
◆ Color: Yellow + Grey

Cheerman 8380

Non-contact Infrared Thermometer DT-8380
Gun Type
◆ Temperature Range - 50deg C to 380degC

-58deg F ～ 716 deg F

◆Accuracy= ±2% or 2 deg C
◆ Distance Spot Ratio= 8:1
◆ Emissivity= 0.95
◆ Response Time & Wavelength : 500ms & (8-14)um
◆ Repeatability= ±1% or±1deg C
◆ Resolution =0.1 deg C or 0.1 deg F
◆ ℃/℉ Selection √
◆ Data Hold Function √
◆ Laser Target Pointer Selection √
◆ Backlight Display Selection √
◆ Auto Power Shut Off √
◆ Low Battery Indication √
◆ Power 9V Battery
◆ Product Color Yellow + Black

------------------------------------------------------------------------------------------------
notes:

1. What is the distance to spot ratio?

D/S Ratio- Distance to Spot ratio refers to a very important feature of your infrared thermometer.  This ratio is the size of the area being evaluated by the infrared thermometer as it relates to distance.  In other words, the area being measured becomes larger as the distance increases.  This has a profound impact on the accuracy or precision of the reading.  If the target you are measuring is 6 inches in size, and your infrared thermometer has a D/S ratio of 8:1, than the maximum distance you can reliably measure the temperature of the target is 48 inches.  Beyond this distance, not only is the target being measured, but whatever else falls within the "spot" is being measured as well.  This means that if a very hot object is the target, and it is in cooler surroundings, than measurements taken beyond the maximum distance will include cooler elements, and lowering the "average" of what is in the "spot".

D/S Ratio X Target Size,   or   8:1 X 6 = maximum measure distance of 48 inches.

As the target size decreases, or the distance to the target increases, a larger D/S Ratio becomes necessary.  Using the same example above, and changing first the target size, and then the D/S ratio, you can see that this formula helps you decide the correct D/S ratio and therefore the Infrared Thermometer for your needs.

D/S Ratio X Target Size,   or   8:1 X 2 = maximum measure distance of 16 inches.

D/S Ratio X Target Size,   or 12:1 X 2 = maximum measure distance of 24 inches.

D/S Ratios vary greatly, so carefully compare this feature of IR Thermometers when comparison shopping.  This ratio, and temperature range are the two biggest factors to consider when shopping for an Infrared Thermometer!

Ref : http://www.infraredthermometersale.com

INFRARED THERMOMETER (Low temperature) CHEERMAN DT 320

CHEERMAN DT-320= PHP2,500
Gun Type
◆ Temperature Range -50 deg C to 320 deg C
-58 deg F to 608 deg F
◆ Accuracy ±2% or 2 deg C
◆ Distance Spot Ratio 8:1
◆ Emissivity 0.95
◆ Response Time & Wavelength 500ms & (8-14)um
◆ Repeatability ±1% or±1 degC
◆ Resolution 0.1% or 0.1 degC
◆ ℃/℉ Selection √
◆ Data Hold Function √
◆ Laser Target Pointer Selection √
◆ Backlight Display Selection √
◆ Auto Power Shut Off √
◆ Low Battery Indication √
◆ Power 9V battery
◆ Product Color Yellow + Black

CHEERMAN DT 8280 Pen Type Infrared Thermometer

CHEERMAN DT 8280 Pen Type =PHP1,250 EACH

Temperature Range -50 deg C ～220 deg C
-58 deg F ～ 428 deg F

◆ Accuracy ±2% or 2C
◆ Distance Spot Ratio 1:1
◆ Emissivity 0.95
◆ Response Time & Wavelength: 500ms & (8-14)um
◆ Repeatability ±1% or±1 deg C
◆ Resolution 0.1 deg F or 0.1 Deg C
◆ deg C/ deg F Selection √
◆ Data Hold Function √
◆ Auto Power Shut Off √
◆ Low Battery Indication √
◆ Power 2pcs Cell button (1.5V/each)

How to Replace Heating Element for SMD rework "hot air" stations?

the 2 wires = for analog rework stations
the 4 wires = for digital rework stations or those hot air with digital temperature display

=============

How to Know if the Heating Element of your SMD rework hot air station is busted?

-->1. pls refer to page 7 of the hakko 850B manual. easy lang ang pagreplace ng heating element.
a good heater must have resistance of 70 -100ohms for 220V. if wala na sa ganyang range , busted heater siya & need to replace

a. open the handle

b. measure the resistance value using a multimeter

actual pics. click to enlarge. ang nakapicture dyan is a brand new heating element, na ipapalit sa busted heating element

ESD Alcohol Bottles (IPA dispensing bottle)

ESD Alcohol Bottles (IPA dispensing bottle)

Static dissipative dispensers come with a stainless steel pump with air tight check valve or Purity pump that protects against cross contamination by keeping fluid from returning to dispenser. Features an average surface resistivity of 10E9 to 10E10 ohms. and can dissipate a ±5000V charge in less that 2 seconds at 40% relative humidity.

These ESD safe polyethylene solvent dispensers are available in four standard sizes. These dispensers have neither a stopper nor a cap to remove. Just touch the dispensing dish with a brush cloth or applicator and solvent is brought to the surface instantly as needed. Stainless steel valves seal contents in bottle until used. The fluid pumps into the dish and it does not drip back into the bottle, keeping stored liquids uncontaminated.

Natural HDPE Bottles High density polyethylene suitable for many solvents. Square shape provides stability and saves storage space. Wide opening for easy fill. Translucent allows easy viewing of contents.

Anti-static bottle also with anti-reflux design, suitable for store some solvents, such as alcohol, carbinol. Suitable for medical, industry.

Surface resistivity of 10E7 to 10E9 Ω.
Available in #60 = 6 oz = 180 to 200 mL
Available in pink & white colors

---------------------------------------------------------------------------------
notes:
1. Usually yung 180ml (#60) na ESD bottle ang required ng clients at yung color Pink & White ang pinakamabili kaya to yung usually me maraming stock lagi kasi fast moving.

Hakko 851

original Hakko 851

HAKKO FT-800 soldering thermal wire stripper station

Hakko ft-800







blades

HANSTAR REPLACEMENT SOLDERING TIPS

HANSTAR LONG-LIFE SOLDERING TIP- Lead Free

HANSIN-HANSTAR is a well-known manufacturer of soldering stations, soldering tips, & other soldering tools in China. It is also an OEM for many famous brands, & has been making lead-free soldering tip since 1998.

Our process for making long life soldering tips involves advanced techniques in electroplating, heat treatment and mechanical processing, which is improved by strong innovation to meet new challenges & market needs. With its advanced equipment and strict quality control methods, we make sure that the products have good heat conduction effect as well as long service life in the fields of lead-free soldering.

HANSIN-HANSTAR has gained many clients in China and overseas under the policy of low priced but high quality soldering tools to let the industrial clients save on the production cost. To ensure the clients’ continuous demands & urgent needs, we always maintain large stockpiles of soldering tip for immediate delivery.

Manufacturing Process:
1. The process starts with stock high-grade copper bar which is machined to produce the required shape and size.
2. Then the tip will be plated with iron, to assure its longer life span. After iron plating, the tip point will be measure & re-machined if needed to assure precise working surface area & angle.
3. Next, nickel plating is applied. Nickel plating is for protection against corrosion. 2x or 3x electroplating cycle is done depending on the types of soldering tips.
4. The last step is applying layers of tin on the solder tip to give good joint result to provide efficient heat transfer.
5. Then finished soldering tips will be measured again using precise measuring equipment & will be packed accordingly.
Hanstar Electronics Equipment always manufacture many types of replacement soldering tips to fit different brands & models of soldering station & iron like Hakko, Quick, Weller, Plato, Bonkote, & other rare soldering tips. We do customized tips to suit clients’ needs & budget & also accept OEM works with your brands printed.
In 2006, Hansin Electronics Trading (HET) was founded in the Philippines to serve as the Sales Agent for Hansin-Hanstar Soldering Tools & allied products. HET always maintain stocks of good quality soldering tips for ASAP delivery (3hours to 2 days ARO).To maintain & persuade new clients & uphold its objective of lowering the production cost of its clients, HET business policy of LOW mark-up, coupled with Efficiency & Volume Discounts allows it to sell soldering tips at the LOWEST price possible for the benefits of the clients.

We manufacture the ff replacement soldering tips:
900M series
900L series
200 series
T12 series
weller series (under improvement process)
tips for soldering iron
we also do customized soldering tips or OEM with your own brand




REPLACEMENT SOLDERING TIPS

900M series

For 900M, 900M-ESD,907, 907-ESD soldering iron:

Conical Tips:
900M-T-B General purpose tip. Standard tip as supplied with a new station.
900 M-T-I Fine point tips. Popular for SMD work.
900M-T-LB Fine point tip with extended reach. Popular for SMD work.
900M-T-S4 High thermal mass tip. Use for fine work adjacent to ground planes, heat sinks etc.
900M-T-SB High thermal mass tip. Use where more visibility is required.
900M-T-SI General purpose tip. Short reach for maximum heat transfer.

Chisel Tips:
900M-T-0.8D 0.8mm chisel tip.
900M-T-1.2D 1.2mm chisel tip.
900M-T-1.2LD 1.2mm chisel tip with extended reach.
900M-T-1.6D 1.6mm chisel tip. Popular for general purpose work.
900M-T-2.4D 2.4mm chisel tip.
900M-T-3.2D 3.2mm chisel tip. Used for soldering larger flat terminals etc.

Bevel Tips:
900M-T-0.5C 0.5mm bevel tip.
900M-T-0.8C 0.8mm bevel tip.
900M-T-1C 1mm bevel tip.
900M-T-1.5CF 1.5mm bevel tip. Tinned only on the flat.
900M-T-2C 2mm bevel tip.
900M-T-3C 3mm bevel tip.
900M-T-4C 4mm bevel tip.

Special Purpose Tips:
900M-T-1.8H Angled tip. Used for confined working areas and SMD work.
900M-T-3CM 3mm tip with indent for SMD soldering.

Works on a similar principle to 'wave' tips :
900M-T-R SMD chip tip.
900M-T-K Knife tip.

900M SERIES


















----------
900L SERIES











900LT-1C
900LT-2C
900LT-3C
900LT-4C
900LT-i
900LT-B
900LT-K
900LT-1.2D
900LT-1.6D
900LT-2.4D
900LT-3.2D
---------------------

200 series
soldering tips

200-K
200-i
200-B
200-0.5c
200-0.8c
200-1c
200-2c
200-3c
200-4c
200-0.8d
200-1.2d
200-1.6d
200-2.4d
200-3.2d


---------
T12 series tips
T12-B
T12-B2
T12-B3
T12-BL

T12-BC1 , T12-BCF1 (1C)
T12-BC2 , T12-BCF2 (2C)
T12-BC3 , T12-BCF3 (3C)
T12-C1 (1C)
T12-C4 , T12-CF4 (4C)

T12-D08 (0.8d)
T12-D12 ( 1.2D)
T12-D16 ( 1.6D)
T12-D24 (2.4D)
T12-D32 (3.2D)

T12-I
T12-IL
T12-ILS

T12-K
t12-KR




----

CUSTOMIZED TIPS:

We can do Customized Tips



RoHS of Hanstar Soldering Tips




-----



N452 series soldering tips



--------------------------

tips for soldering iron -25W, 30W,50W, 60W, 80W,100W