1. HAKKO A-1321 Heating Element

HAKKO A1321 (LEFT PICTURE) , SBF-A1322 (RIGHT PICTURE)


1. Heating Element HAKKO A-1321 (JAPAN)

(24V/50W) ceramic heater

- For 900M, 900L, 907, 908, 913 and 914 soldering iron
- Compatible to soldering tips 900M & 900L series tips
- Used in soldering station Hakko 936, 937 ,
- also used in Hanstar Soldering Stations 937,942,938,& 951

Part No. / Application Iron
Hakko A1322 / 900S, 900S-ESD
Hakko-1321 907 / 908
ORIGINAL HAKKO (Origin: Japan)

2. SBF- A1322 HEATING ELEMENT (CHINA)

HAKKO A1321 (LEFT PICTURE) , SBF-A1322 (RIGHT PICTURE)


2. SBF- A1322 HEATING ELEMENT (CHINA)
- For 900M, 900L, 907, 908, 913 and 914 soldering iron
- Compatible to soldering tips 900M & 900L series tips
- LOW COST, GOOD QUALITY HEATER
- Used in soldering station Chinese Brands’ 936A, 937A

3. Heating Element 454H (JAPAN) -25W

3. Heating Element 454H (JAPAN) -25W
original Hakko from Japan
- Used in Soldering Iron Hakko N454 – 25W (Hakko Dash)

1. SMD REWORK "HOT AIR" STATION HANSTAR 850A

SMD REWORK STATION- HANSTAR 850A

Features:
- Portable handles, easy to place and space saving．
- Air volume and temperature are Adjustable, Suitable for Removing Various QFP, SOP, PLCC, SOJ, etc.
- ESD design safe for sensitive element.
- Automatic cooling system, Can work when power supply was Put off to prevent too hot.

CONTROL STATION:
Model name: 850A
Power consumption: 30W
Power consumption (After Power Off): 4W
Pump: Diaphragm model
Temperature range: 100-450℃
Air volume: 23 L/min
Resistance of welding nozzle to grounding: <2 br="">Voltage of welding nozzle to the grounding: <2mv br="">Length of Power line and soft pipe: 1.2m
Temperature Controller: Analog
voltage: 220V
Size : 160(W)mm, 145(H)mm, 225(L)mm
Weight: about 4 kg

SPRAYER
Power consumption 270W
Length, Weight: 196mm , 120g

Fit for 24hour Industrial Usage
1 SET includes Free 4 STAINLESS STEEL nozzles: diameter 2.5mm (cross reference: hakko A1124), diameter 4.4mm (cross reference: hakko A1130), diameter 7mm, diameter 10mm

2. SMD REWORK "HOT AIR" STATION- HANSTAR 850D

SMD REWORK STATION- HANSTAR 850D

Features:
- Digital Display
- Portable handles, easy to place and space saving．
- Air volume and temperature are Adjustable, Suitable for Removing Various QFP, SOP, PLCC, SOJ, etc.
- ESD design safe for sensitive element.
- Automatic cooling system, Can work when power supply was Put off to prevent too hot.

CONTROL STATION:
Model name: 850D
Power consumption: 30W
Power consumption (After Power Off): 4W
Pump: Diaphragm model
Temperature range: 100-450℃
Air volume: 23 L/min
Resistance of welding nozzle to grounding: <2>

NOTE: 1 SET includes 3 to 4pcs Free STAINLESS STEEL Nozzles:

diameter 2.5mm (cross reference: hakko A1124), diameter 4.4mm (cross reference: hakko A1130), diameter 7mm, diameter 10mm

1. SOLDERING STATION HANSTAR 942-90W

Lagunastar SKU= HS-942-90W

HANSTAR 942- ESD SAFE (90W)
FEATURES:
● Quick heat-up & Great thermal recovery allows soldering at lower tip temperatures making the Hanstar 942 & Hanstar 938 effective solutions for lead-free soldering
● Fast temperature returning capability permitting high quality soldering work. ● HANSTAR 942 / 938 uses a triune digital display and rapidly increases/ decreases by ±1deg C
● Temperature range of 200-450 deg C, the error is linear proportional and within ±3 deg C
● The correcting value for 942 & 938 temperature calibrations is easily inputted through touch of keys, which greatly improve the accuracy of temperature error correction. ● With low temperature alarm function.
● Temperature locking function with a card makes the set temperature unable to change freely.
● Separate Design of Heating Element & Soldering Tip. No need to replace the whole heating element & tips. Just replace the worn-out soldering tips for BIG savings! Uses 900M series soldering tips.
● Anti-static design eliminating harmful static discharges. ● Japan-made Heating Element for long lasting heater operation.
● Widely Used, Long Life Operation, Low Cost but Great Performing, Spare Parts are low cost & easily available
● Modified Hanstar 942/ 938 that can rapidly reach awesome 600 deg C available at client’s request.
Specifications:
Soldering Station Station no. 942
Power consumption: 90W
Temperature range: 200-450℃
Temperature stability: ±1℃ at idle temperature ±2℃at idle temperature
Input voltage : 220V, 60Hz/50Hz
Output voltage AC 24V
Size & Weight (without wire) 188(L)×100(W) ×108(H)mm , 2.5 Kg
Accessories Included Soldering Iron with tip (900M-T-I), Stand, Sponge, Lock Card, Manual, Adaptor Plug

Soldering iron
Power consumption= 90W (24V)
Tip to ground resistance: < 2Ω , Tip to ground potential: < 2mV
Length, less cord: 172mm
Weight, less cord: 30g
Length of cord: 1.2m

==========
Notes:
1. its old code is Hansin 942, now we have 2 models of Hanstar 942, one is 90W & the other 1 is 100W

2. more photos:





 
you can see here is the ESD groundings

3. they are also available in 3 prong USA/ Philippine plug 

4. Instruction Manual including the calibration procedure in page 10:

5. SOLDERING STATION- HANSTAR 937 / HANSTAR 937A

HANSTAR 937 / HANSTAR 937A ESD Digital soldering station

FEATURES
● Built-in advanced microcomputer digital control and display system．
● Heating Element is Original Hakko from Japan to give long lasting heating operation!
● Separate Design of Soldering Iron & Tip. No need to replace the whole unit. Just replace the worn-out soldering tips or iron for BIG savings !
● Portable handle, no feeling of fatigue for long period of operation.
● Equipped with special temperature-fixing screw to prevent operator from adjusting temperature abusively
● Separate design, compact structure, easy to place.
● Universal and anti-static types (ESD Safe) for different works
● 907, 907ESD match 900M series soldering tips 908,908ESD match 900L series soldering tips
● Input voltage: 110V /220V, 60Hz/50Hz.

Specifications:

SOLDERING STATION
Power consumption 60W
Output voltage AC 24V
Temperature range 200 ~ 480 deg C
Size (without wire) 120(W) x 93 (H) x 170 (L) mm
Weight(without wire) 1.3kg

SOLDERING IRON
ITEM:907
Size: M
Function: anti-static
Power consumption AC 24V-50W
Soldering tip : I 900M-T-I
Grounding resistance <2 style="font-weight: bold;">HANSTAR 937 =Hakko A-1321 Heating Element (imported from Japan)
HANSTAR 937A = SBF A1322 (made in China)
Length( without wire) =190mm
Weight (without wire) =44g 5

Note: COMPLETE SOLDERING KIT:
PRICE INCLUDES SOLDERING IRON 907-ESD WITH 900M-T- i SOLDERING TIP,
ESD SOLDERING STAND, SPONGE , Plug Adaptor, Manual

Anti-Static Rubber Mat (ESD safe)

1 shipping box of 1 roll ESD mat (1.01m x 10m x 2mm)

ESD mat nakaspread sa banig para hind madumihan, pero kahit walang banig oks lang, nakabalot naman siya sa plastic from its shipping box.

sample esd mat with sample groundings-likod to kaya kulay black

sample esd mat with UFO grounding- harap to kaya kulay green


ANTISTATIC (ESD) RUBBER MAT
ESD Rubber Mat is also known as the Two Layer ESD Mat. ESD Rubber mat has Static Dissipative top rubber layer laminated to a conductive rubber bottom layer. Surface resistivity of top layer is 107 - 109 and bottom layer is 103 – 105. Meets ESD-D-412 standards .Material offers excellent resistance to oil, grease and most common solvent. ESD Rubber mat has resistant to 2400 F
The static dissipative top layer is designed to discharge static fields at the right speed to prevent damage. The conductive bottom layer of the ESD Rubber Mat is designed to quickly drain all the charges filtered by the top layer to the ground. The ESD Rubber Mat does not melt and does not burn coming into contact with hot metal parts or soldering debris. This ESD Table Mat is ideal for table top applications and comes with a ground cord so you can have your work space setup and ESD safe within seconds.
This Two Layer ESD Table Mat is also easy to clean.
Application: Work surface, Table Top
Color: Green (top), black (bottom)
Features:
1) High quality antistatic rubber mats ( Durable, heat and chemical resistance, non-slip surface, lays flat- will not curl)
2) Designed to drain charges from personnel, tote boxes, bags, components
3) Entirely free of carbon , Not affected by humidity
Application: table, floor, shelf , Use as either bench or floor mat
Economical, easy to cut , Easy to install , Easy to clean and maintain
Attractive finish

*Surface resistance: TOP LAYER :10^7 -10^9 Ω
Bottom LAYER: 103-105 Ω
Thickness: 2mm
Available width: 1.01 m
Abrasion< roll =" 10m" style="font-weight: bold;">Groundings sold separately

UFO GROUNDING CORD=
includes the snap connector (UFO Shaped with 10mm male), female 10mm snap, ground cord, banana plug & crocodile plug

note:
1. UFO groundings siguro tawag dito kasi kasi nga korteng flying saucer yung snap

Anti- Static (ESD) Brush- toothbrush style

ESD BRUSH (CONDUCTIVE brush- toothbrush style)
The handle of the antistatic electronic brush is made of conductive polypropylene handles and conductive fibres consisting of 40% polypropylene, 45% polyamide and 15% carbon fibre and its brush is made of antistatic plastic. Such brush has the features of antistatic, stable performance and easy to use. The removal of the dust and dirt on the surface of PCB plate and sensitive parts can discharge the static electricity to the ground. These brushes avoid any static build up and existing charges are reduced more effectively if operators are grounded. Resistant to high temperature.

The brushes are approved to BSEN 61340-5. (test result : Resistance= 10^5 to 10^7 ohms)
Resistant to high temperature, sweep surface dirt of PCB and sensitive element, discharge the arisen static to the ground. Suitable for use in clean, washing and package area.

- Remove static of computer and program control exchanger to protect equipment
- Remove static before check and commission electronic products and boards
- Remove static before ex-work package of electronic products
- Used for package and connection of whole machine
- Remove dust and static of material in warehouse
- Used for incoming examination of re-package of SSD elements

• Removes dirt on PCB or other sensitive components, and discharges the static electricity to the ground.
• Brushes minimize static charge generation and dissipate ESD charges to ground when held by grounded personnel
• Dissipative polypropylene black handles are able to remove charges to ground
• Resistance of conductive fibers: 10³ - 10⁴ Ω
• Resistance of dissipative handle: 10⁵ - 10⁸ Ω
• Firm bristles are mainly for electronics, especially circuit boards

ESD brush Toothbrush style length:

Gj-928 (small)
Length of body=174mm , Brush Head dimension= 15(H) x 31 (L) x 9 (W) mm
cross ref code of other supplier :ABB-512

Gj-925 (medium)
Length of body=180mm, Brush Head dimension= 16(H) x 36 (L) x 9.5 (W) mm
cross ref code of other supplier : 177114 , BC-3620

Gj-922 (large)
Length of body=175mm, Brush Head dimension= 15.5(H) x 58.5 (L) x 9.5 (W) mm
cross ref code of other supplier :177113 , BC-3621, ABB- 302

------------------------------------------------------

notes:
1. cross reference from http://www.esdtools.com ESD brush
-our ESD brush are the same ESD brush from esdtools.com at a much much lower price


2.

• Brushes minimize static charge generation and dissipate ESD charges to ground when held by grounded personnel
• Dissipative polypropylene black handles are able to remove charges to ground
• Resistance of conductive fibers: 10E3 - 10E4 ohms
• Resistance of dissipative handle: 10E5 - 10E8 ohms
• Firm bristles are mainly for electronics, especially circuit boards
• Bristles are a mix of conductive synthetic yarn and horse hair

ESD Handbook TR20.20 Table 1 lists under Typical Static Electricity Sources "Brushes (camel/pig hair and synthetic bristles)." "It should be understood that any object, item, material or person could be a source of static electricity in the work environment. Removal of unnecessary nonconductors, replacing nonconductive materials with dissipative or conductive materials and grounding all conductors are the principle methods of controlling static electricity in the workplace, regardless of the activity." (TR 20.20 section 2.4)

COMPANY PROFILE

Lagunastar Industries Company was founded in Santa Rosa City, Laguna Philippines in 2010. It traces its roots from Hansin-Hanstar Electronics Trading which started in 2006 as the Philippine Sales Agent of Shenzhen Hansin Electronic Tools Co. Ltd (OEM factory founded in 1998) & its sister company Hanstar Electronics Equipment (China).

Lagunastar Industries is the Sole Philippine Distributor of its HANSTAR brand of Electronic Tools.

The Hanstar Electronics Equipment (China) specializes in developing, manufacturing and selling the HANSTAR brand of world—class quality ESD- safe electronic tools and products. The company manufactures Soldering Station, Soldering Tools & Replacement Tip, Anti-static Product, Ionizers, Optics Products, Instruments and Meters and etc.

Hanstar have a large machine shop in China to accommodate big demands, and produce quality products at low- cost. While we aggressively sell our own Hanstar brand, we also accept OEM orders to print our clients’ own brand. Our own advanced Engineering, Research and Development Center always work to further innovate and improve our products.

Since 1998, because of proven quality at lower cost, aside from China & Philippines, Hanstar products are now widely used in factories in Hong Kong, Indonesia, Sri Langka, Canada, India, Pakistan, South Africa, Saudi Arabia, Slovenia, Singapore, Thailand, Malaysia, Italy, Spain, USA & Germany. And, we are now in the process of making Hanstar Electronics products available globally.

Lagunastar Industries Company(Philippines) insists on the principles of “Low Cost, Better Quality, New Technology". Since 2006, it has gained a reputation of supplying low cost but “gets the job done” electronic tools & replacement parts. In an era of “cost cutting” without sacrificing quality works, we are slowly but surely gaining industrial clients around the Philippines.

We locate our sales office in Santa Rosa City, Laguna because of its proximity to our main clients: the electronics factories.
Also, because of our desire to further serve our clients, we are now selling well-known electronic tools brands from Japan, USA, UK, Germany & Taiwan. And because of our desire for the ordinary people & individual professionals to enjoy the benefits of digital electronic tools, we are now offering our digital tools that are beneficial to the users such as digital body thermometers, BP meters, multimeters, calipers, micrometers,etc.

in 2010, Lagunastar Industries become the authorized distributor for CALABARZON area of CHEERMAN Infrared Thermometers.

As a professional manufacturer of Infrared Thermometer, TianJin Cheerman Technology Co., Ltd is offering customers with: best quality, competitive prices, excellent service, strong quality guaranty and powerful R & D.

They have obtained CE, RoHs and 9001, and their best quality guaranty and quality control help them win more and more international customers.Now, they have extended their markets to Europe, North America, Australia and Middle East.


YOUR ADVANTAGES WHEN BUYING FROM US:

1. LOWER COST, GOOD QUALITY, results to BIG SAVINGS on your Production Cost.

2. 1 YEAR WARRANTY, excellent AFTER-SALES SERVICE, SPARE PARTS are LOW COST & ALWAYS AVAILABLE FROM US.

3. FAST LEADTIME! WE ALWAYS MAINTAIN ADEQUATE STOCKPILES for your URGENT needs & our online store is open Monday to Saturday, 8am to 8pm for Urgent Delivery!

4. TECHNICAL SUPPORT for your inquiries & needs. We love to talk to you!

5. We do OEM to print your own brand & we customize our products for your Special Requirements

---------------------------------------------------------------------------------------------------------------------

LAGUNASTAR INDUSTRIES COMPANY Business Documents:

------------------------------------------------------------------
Letter of Exclusive Distributorship- from HANSTAR
----------------------------------------------------------------------------------

HANSTAR ELECTRONICS EQUIPMENT(SHENZHEN)

----------------------------------------------------------------------------------------

TIANJIN CHEERMAN TECHNOLOGY