Dual Footwear / Wrist Strap Tester- Dr Schneider SL-032

 

  

 

Dr Schneider SL-032 tester can be touchable and used as 3 status,which is ideal for fast and multiple test for ESD grounding device. 

This tester shall be used as one of calibration instruments according to the calibration standard inclusive of daily inspection of technical requirement and program described as 6.1.3.2 in ANSI ESD S20.20. 

Combo tester is designed for unique dual-testing circuit, which not only improve test speed, but also no single wrist strip/foot panel tester required. Furthermore, SL-032 configures with 750KΩ-10MΩ circuit used to test wrist strip and 750KΩ-100MΩ circuit used to test shoe cover,

 SL-032 tester is ideal for testing of wrist strip and shoe cover. Test parameter has been preset in factory; however it can be used only after one needed by you coordinates with test parameter. It is easy to operate; green indicator stands for normal operation status, red one and sound for higher or lower resistance. Accessories are: one 9V battery, a pedal, one piece of grounding cable, a stand, 3 pieces of screw and 3 pieces of fixed activities stand button .

 It has been calibrated base on NIST standards and is applicable to other 3 items. They are SL-033, SL-033A, SL-036. 

SL-032 is a 3-state touch tester designed for fast, frequent testing of personnel grounding device. 

Fast testing separately for wrist straps and grounder test units. Easy to operate.

Instrument Net Weight	250g
Dimensions	Instrument: 160 x 100 x 40mm Rod: 400 x 250 x 800mm Foot board: 400 x 400mm

Wrist test margin: 750KΩ-10.5MΩ		Shoe cover test margin: 750KΩ-35MΩ
Resistance tolerance (±10%)	Test output	Resistance tolerance (±20%)	Test output
675KΩ	Red (FAIL LO)	675KΩ	Red (FAIL LO))
825KΩ	Green (PASS (Normal))	825KΩ	Green (PASS (Normal))
8. 5MΩ	Green (PASS (Normal))	8.0MΩ	Green (PASS (Normal))
11.5MΩ	Red (FAIL HI (Fail Hi))	120MΩ	Red (FAIL HI (Fail Hi))

 ===

notes:

1. more photos:

 

 

Continuos Wrist Strap On-line Monitor (Single) Surpa 518-1

Surpa 518-1

 

 

  

Surpa 518-1

Wrist Strap On-Line Monitor Single port

High-tech, highly reliable, easy and convenient Electrostatic Field Meter.  It draws static from the human body continuously and has an instant warning with lamp and alarm to warn the user should the wrist strap fails or the grounding is disconnected.

Features:

·         No checking is required

·         Instant warning of wrist strap failure, improve production quality

·         Small and handy

·         For your convenience, you can use any wrist strap with banana plug in the market

Specification:

·         Input   -- 6V DC

·         Material – polystyrene

·         Dimension – 67*60*29 (mm)

·         Weight – 60gm(not including power supply adaptor)

Monitoring range on operator

Low:   800K>R       yellow LED glitter with audible alarm
Pass:  800
High:   R>35M       red LED flash with audible alarm
Accuracy: +/-10%

Input: 220V AC/50HZ, output: 9-12V DC/200mA

Input: 120V AC/50HZ, output: 9-12V DC/200MA

===

notes:

1. other photos :

 2. Dual port is also available

Wrist Strap On-line Monitor (Single) KINGSOM 518-1

KINGSOM 518-1

 

 

Wrist Strap On-Line Monitor Single port

High-tech, highly reliable, easy and convenient Electrostatic Field Meter.  It draws static from the human body continuously and has an instant warning with lamp and alarm to warn the user should the wrist strap fails or the grounding is disconnected.

Features:

·         No checking is required

·         Instant warning of wrist strap failure, improve production quality

·         Small and handy

·         For your convenience, you can use any wrist strap with banana plug in the market

Specification:

·         Input   -- 6V DC

·         Material – polystyrene

·         Dimension – 67*60*29 (mm)

·         Weight – 60gm(not including power supply adaptor)

Monitoring range on operator

Low:   800K>R       yellow LED glitter with audible alarm
Pass:  800
High:   R>35M       red LED flash with audible alarm
Accuracy: +/-10%

Input: 220V AC/50HZ, output: 9-12V DC/200mA

Input: 120V AC/50HZ, output: 9-12V DC/200MA