HANSTAR HS-150W LED very powerful soldering station

 

HANSTAR HS-150W LED

SKU= HANSTAR-HS-150W-LED 

 

 

the most powerful soldering station we have now at a very low price. it is high frequency soldering station- 150W, uses SMPS

HANSTAR HS-150W LED

 

ESD soldering station

FEATURES:

Brilliant Performance

* Now Uses SMPS (Switching Mode Power supply)
* Astonished heating speed - Only within 20s to reach 300℃ from room temperature.
* Perfect intelligent soldering effects - Sufficient power varies with the sizes of soldering point.
* Effectively avoid negative impact by cold soldering etc.

* Extraordinary heat recovery -

Incredible temperature compensation speed can solve temperature problems occur during lead-free soldering. It is a better tool for lead-free soldering and lower-temperature soldering.
* Extension of life of soldering tips
Relative lower temperature will largely prolong the life of soldering tips.

● Separate Design between heater and soldering tips . No need to replace the whole unit. Just replace the worn-out soldering tips or iron for BIG savings.

* USES 500 SERIES Soldering Tips

* with anti-static grounding cord with crocodile clip

Applied Function
* Auto sleeping, energy-efficient, Temperature will lower to 200degC when not in use over 20 minutes.

When work is needed again, temperature will reach up to set one rapidly.
*Temperature can be locked by passwords to prevent inadvertent changes.

Specifications: 

 

Main Station

Power consumption	150W
Output voltage / Frequency	36VAC 400KHz
Temperature range	200 ~ 420℃
Input voltage	110V / 220V, 60Hz/50Hz.
Time of temperature rising(20℃-350℃)	25 sec
Temperature Compensation Speed	Very quick
Heating Mode	intelligent
Heating Theory	High frequency current

HANDLE

RESISTANCE (TIP TO GROUDNING)	< 2Ω
VOLTAGE (TIP TO GROUND)	< 2 MV

Auto SleepingYes

Temperature-click ModePassword

ESD Housing

Aluminum housing 

COMPLETE SOLDERING KIT:

PINCLUDES SOLDERING IRON, WITH SOLDERING TIP (500-B or 500-i), SOLDERING STAND & SPONGE, anti-static ground cord with crocodile clip

===

Notes:

1. Instruction Manual for HS-150W LCD/ LED

 

HANSTAR SOLDERING POT- with TITANIUM ALLOY Boiler Pot- HANSTAR 101- Customized to 100mm depth

 

 

HANSTAR SOLDERING POT- with TITANIUM ALLOY Boiler Pot- 

HANSTAR 101- Customized to 100mm depth of boiler pot

SKU= HANSTAR-101-V2 

 

HANSTAR titanium alloy SOLDERING POT (solder bath)

HANSTAR titanium alloy SOLDERING POT (Solder Bath)

FOR ALL MODELS:

-THE BOILER OF HANSTAR LEAD-FREE SOLDER POT IS MADE FROM TITANIUM ALLOY FROM JAPAN. Even better than the leading brands!!!

- The Titanium Ally Boiler is even treated by High Temperature Treatment for more longer life

- DESIGNED FOR LEAD- FREE SOLDERING. Perfect for Dip Soldering.

- The High Temp Treated TITANIUM ALLOY SOLDER POT IS VERY TOUGH, CAN RESIST HIGH TEMPERATURE, ABRASSION, CORROSION & WITH LONG SERVICE LIFE COMPARED TO OTHER BRAND WHOSE SOLDER POT IS MADE FROM GALVANIZED IRON OR STAINLESS STEEL ONLY (stainless steel is oftentimes not suitable for lead-free soldering).
- ALL MODEL WITH HIGH POWER HEATING ELEMENT (suitable to dissolve soldering tin bar rapidly, only 10 minutes to reach 250 deg C from room temperature.

- WITH DIGITAL TEMPERATURE CONTROL FOR PRECISE TEMPERATURE CONTROL. AUTO-SLEEPING , ENERGY -EFFICIENT ,

- With malfunction alarm. When not in active operation, the temperature will lower to the set one, then if in operation, the controller software will automatically adjust the temperature rapidly .

 

 

 

HANSTAR 101- Customized to 100mm depth boiler pot

SKU= HANSTAR-101-V2

 

HANSTAR 861D SMD REWORK HOT AIR STATION for electronics #HANSTAR

 HANSTAR 861D SMD REWORK HOT AIR STATION for electronics #HANSTAR

SKU= HANSTAR-861D 

 

 

HANSTAR 858 SMD Hot Air Rework Station #soldering #reworkstation

HANSTAR 858 SMD Rework "Hot Air" Station

SKU= HANSTAR-858

 

 

 

 

  SMD ‘HOT AIR’ REWORK SYSTEMS –ESD Safe

                       -For Repair of SOIC、CHIP、QFP、SOP, PLCC、BGA, etc.

                 

                       Features:
                     1. Closed path of transducer, micro computerized zero-crossing trigger of temperature control, LED display, high power, 

                        fast rise of temperature, accurate and steady temperature, no impact from air volume and real lead-free unsoldering.

                     2. Adjustable air current, big wind volume and gentle wind, convenient temperature adjustment, and

                         can be applied to several purposes.
                     3. There is an inductive switch in the handle. When holding the handle, the system can enter working mode quickly and

                   when putting the handle back to the handle holder, the system will enter stand-by state. Therefore, it is very convenient

                   to operate.

                     4. With automatic cold wind function, which can prolong service life of the heating element and protect the hot air gun.
                     5. Adopt alloy shell. The machine body is small, durable and nice and covers little working space.
                     6. Adopt brushless fan thus enjoy very long service life and generate low noise. Adopt high quality heating element,   

                   which doubles the efficiency under the same situation, prolongs service life of the heating element and

                  saves power consumption.

                7.  1 set includes 3 nozzles: A2084 (dia 8.4mm), A2127 (dia 12.7mm), A2064 (dia 6.4mm)   

 

HANSTAR 858 rework	HANSTAR 858D rework
Hot Air	Hot Air
Sort:  ANALOG  control	Sort: Digital control
Power consumption: 700W	Power consumption: 700W
Pump: Soft wind ,Noise: < 45db	Pump: Soft wind ,Noise: < 45db
Air current: 120L/minute (Max.)	Air current: 120L/minute (Max.)
Temp. range: 100-450 deg C	Temp. range: 100-450 deg C
Handle length: 120cm	Handle length: 120cm
Size: 13.8 x 10 x 15cm, about 1.55kg	Size: 13.8 x 10 x 15cm, about 1.55kg

 

HANSTAR 858 Hot Air Rework Station

Brushless Fan with Soft Wind  

Input voltage:AC 220V±10% 50Hz/60Hz  

Power consumption :700W 

Temperature display:Scale indication 

Temperature range:100℃－450℃

Features:

• The close circuit sensor and the microcomputer are begins to control the temperature above zero, make the equipment truly achieve lead-free unsolder with high power. Warm up quickly, accurate and stabilizing temperature, without the effect of the air volume.
• This equipment can be used for many applications with adjust air volume, large amount and soft wind and convenience temperature control.
• Easy to operate, as long as user grid the handle which with sensor switch, the system can quickly enter the operating mode; and as long as user puts the handle back to the handle carrier, the system will automatically enter standby mode.
• This equipment has the cooling of the function that cans longer the life of heating element and protect the hot air gun.

The design of brushless fan has a long life and minimal noise.