HANSTAR REPLACEMENT SOLDERING TIPS 900M Series for Hakko, Hanstar, and for many other popular soldering iron models

 

 

HAKKO FX-888DX JAPAN Digital Soldering Station

 

 

 

 

SOLDERING STATION HAKKO FX-888DX

SKU= HAKKO-FX-888DX

FX888DX-81BY HAKKO

ORIGIN = Japan

Manufacturer=  HAKKO Corporation

【Features】
Easy to operate. Settings can be easily made by turning the rotary encoder to "select" and pressing the rotary encoder to "confirm".
Optional 95W soldering iron can be connected.
The main body is available in 3 colors. It can be used in various ways.

Specification
Power supply (V): AC100
Power consumption (W): 100
Set temperature (℃): 50-480
Heater capacity (W): 65
Color: Blue/yellow
Power cord length (m): 1.2
Ripple temperature (℃): ±1 (at no load)

2.1 Kg

ESD SAFE

【Specification2】
Tip-to-earth resistance: 2Ω or less
Leakage voltage: 2mV or less
Heater: Ceramic heater

【Material/Finish】
－

【Set contents/accessories】
Station main body (FX-888DX)
Soldering iron part (FX8801-01)
Soldering iron stand (FH800-05SV)
Power cord

 

 

 

====

Notes:

1. 

Hakko FX-888D is already discontinued by Hakko Japan as of March 2025

the rest of the stocks will be the new updated HAKKO FX-888DX, it is also 110V just like all original Hakko items from japan

Hakko FX-888DX & Hakko FX-888D are almost the same except that you can you use higher power soldering iron in the new Hakko fx-888DX

2.

 

 

 

 

 

 

2. OUR BETTER equivalent for the new Hakko fx-888DX, is our highly suggested & widely used HANSTAR 942-90W. 

HANSTAR 942-90W uses the same soldering tips used by hakko fx888D & Hakko fx-888DX, but lower price, better in performance, lower maintenance cost at lower cost of the replacement soldering iron ,

 

but if the clients really want the Hakko fx-888DX, we have stocks to serve you

 

 

SOLDERING TESTER HAKKO FG-101B 100V W/3 WIRED CORD from japan

 

 

Soldering Tester GOOT TM-200 from japan

Soldering Tester GOOT TM-200 

 

 

 

 

TAIYO ELECTRIC IND.CO.,LTD.

Japan

1.000KG

●With a comparator function that automatically performs pass/fail judgment based on the measured value.●Long life sensor enabling 200 times or more measurement.●For measuring iron tip temperature for soldering irons.●W x D x H (mm):185 x 160 x 58●Power supply: 100-240V AC50/60Hz●Measuring temperature range: 0 to 500●C(sensor TM-100S)●Temperature accuracy: 0 to 500● ?}3●(excluding sensor errors)●Set contents： Sensor(3pcs)/Test lead/Fuse

 

 

Soldering Tip Thermometer HAKKO FG100B from japan

 

 

 Measurement results can be sent to compatible soldering irons via IR communication.
Automates the process of reading the tip temperature and calculating the average value.
The number of temperature measurements is displayed, so you can know when to replace the sensor.

SOLDERING Thermometer H-769 HOZAN from japan

 

 

Result of measurement can be saved in an SD card.With a pass/fail judgment function displaying OK/NG based on the result of measurement.With soldering iron identification function for controlling the soldering iron using an IC tag.For measuring iron tip temperature.W x D x H (mm):110 x 155 x 66Measuring range: 0 to 500CResolution: 1Maximum display: 999 countsPower Supply: AA battery x 4

SOLDERING THERMOMETER GOOT TM-100 from JAPAN

 

Iron tip temperature can be instantly measured with high accuracy. Best iron tip thermometer in industry with excellent stability and responsiveness.Long life economical sensor.Count alarm display allowing you to have a general idea of sensor life.For measuring iron tip temperature for soldering irons.W x D x H (mm):83 x 38 x 140Measuring range: 0 to 700CPower supply: AA battery x 4

Liquid Turbine Flow Meter SLW series

 

 

 

Liquid Turbine Flow Meter Overview

SLW series Turbine Flow Meter has simple structure, light weight, high-accuracy, perfect repeatability, sensitivity, easy maintenance and use. It is a kind of volumetric flow meter and low cost flow meter which are widely used to measure liquid which has no chemical corrosive reaction with stainless stee1Cr18Ni8Ti, 2Cr13, corundum Al2O3and cemented carbide. This kind of measured liquid has no impurities such as fiber and particles. The movement viscosity is lower than 5×10-6m2/s at working temperature. If the viscosity is higher than 5×10-6m2/s, turbine flow meter manufacturer will calibrate in the liquid before use, so it is good to use as oil flow sensor ,such as digital diesel flow meter. It can finish batch control, alarm and etc,if matched with digital controllers. It is also the ideal turbine meter for flow measuring and energy saving (such as used as LPG flow meter or digital fuel flow meter,palm oil flow meter)

Features of Liquid Turbine Flow Meter

• High accuracy; Normal type can reach ±1%R, ±0.5%R.High accuracy type can reach to ±0.25%R.

• Excellent repeatability, repeatability in a short time can reach to 0.05%~0.2%.Due to the excellent repeatability; customers buy flow meter and use it for trade purpose.

• Turbine flow transmitter Output pulse frequency signal, suitable for total flow measuring (work as totalizing flow meter) and connecting upper computer through Modbus RS485, it can also be analog flow meter

• Turbine flow sensor no zero drift and strong ability in anti-noise.

• High frequency signal (10Hz~1.5 KHz), strong signal resolution.

• SLW series Turbine Flow Meter with wide turn down ratio, max 1:20,can be used as  pure water flow meter, digital portable water flow meter, cheap RO water flow meter

• Compact and light structure, convenience in installation and maintenance, cheap China flow meter.

• Suitable to measure in high pressure .No need to open aperture on the meter, so it is easy to make high pressure flow meter.

• It is custom turbine flow meter. it can be thread connection turbine flow or sanitary turbine flow meter (tri-clover liquid flow meter), and it can even be made as low flow turbine flow meter with flow meter sensor size only DN4.

• SLW series Turbine Flow Meter can max bear 150℃, so it can be used as hot water meter or measure other high temperature medium.

Technical Specification of Liquid Turbine Flow Meter

Manufacture Standard	Turbine flow meter (JB/T9246-1999)
Turbine Flow Medium	Clean, low viscosity(≤5×10-6m2/ s) ,non-corrosive liquid
Flange Standard	Standard GB/T9113-2000,option ANSI,JIS,DIN
Thread Standard	StandardBSPP(male),optionBSPP (female), NPT.,etc.
Turbine Flow meter Accuracy	1.0%,0.5%
Turn Down Ratio	1:10-1:20
Calibration	Methods	Master meter calibration
		Static weigh mass flow calibration
	Environment	Environment temperature: 20℃
		Relative Humidity :65%
Working Condition	Medium temperature	T1: -20 ~80℃
		T2: -20 ~120℃
		T3: -20 ~150℃
	Environmenttemperature	-20 ~60℃
	Relative Humidity	5%-90%
	Atmospheric pressure	86Kpa-106Kpa
Enclosure Protection	SLW-N:IP60;  othersIP65
Transmission Distance	No more than 1000 m
Turbine Flow sensorMaterial	Housing: Standard-304 Stainless Steel ; Optional - 316 Stainless Steel Bearings and Shaft: Tungsten Carbide   ; Rotor:2Cr13 Stainless Steel Retaining Rings:304 Stainless Steel
Turbine meterConsumption	< 1W
Communication	Modbus RTU/Hart Protocol turbine flow meter

Turbine Flow meter Flow Range & Process Connection & Pressure Rating

Size (mm)	Standard Flow (m3/h)	Extended Flow (m3/h)	Connection	Standard Pressure	Special Pressure
DN4	0.04-0.25	0.04-0.24	Thread	6.3 Mpa	≤16Mpa
			Wafer	1.6Mpa	≤42Mpa
DN6	0.1-0.6	0.06-0.6	Thread	6.3 Mpa	≤16Mpa
			Wafer	1.6Mpa	≤42Mpa
DN10	0.2-1.2	0.15-1.5	Thread	6.3 Mpa	≤16Mpa
			Wafer	1.6Mpa	≤42Mpa
DN15	0.6-6	0.4-8	Thread	6.3 Mpa	≤16Mpa
			Wafer	1.6Mpa	≤42Mpa
			Flange	4.0Mpa	≤10Mpa
DN20	0.8-8	0.45-9	Thread	6.3 Mpa	≤16Mpa
			Wafer	1.6Mpa	≤42Mpa
			Flange	4.0Mpa	≤10Mpa
DN25	1-10	0.5-10	Thread	6.3 Mpa	≤16Mpa
			Wafer	1.6Mpa	≤42Mpa
			Flange	4.0Mpa	≤10Mpa
DN32	1.5-15	0.8-15	Thread	6.3 Mpa	≤16Mpa
			Wafer	1.6Mpa	≤42Mpa
			Flange	4.0Mpa	≤10Mpa
DN40	2-20	1-20	Thread	6.3 Mpa	≤16Mpa
			Wafer	1.6Mpa	≤42Mpa
			Flange	4.0Mpa	≤10Mpa
DN50	4-40	2-40	Thread	1.6Mpa	≤16Mpa
			Wafer	1.6Mpa	≤25Mpa
			Flange	4.0Mpa	≤10Mpa
DN65	7-70	4-70	Thread	1.6Mpa	≤16Mpa
			Wafer	1.6Mpa	≤25Mpa
			Flange	1.6Mpa	≤6.3Mpa
DN80	10-100	5-100	Thread	1.6Mpa	≤16Mpa
			Wafer	1.6Mpa	≤25Mpa
			Flange	1.6Mpa	≤6.3Mpa
DN100	20-200	10-200	Wafer	1.6Mpa	≤16Mpa
			Flange	1.6Mpa	≤6.3Mpa
DN125	25-250	13-250	Wafer	1.6Mpa	≤16Mpa
			Flange	1.6Mpa	≤2.5Mpa
DN150	30-300	15-300	Wafer	1.6Mpa	≤16Mpa
			Flange	1.6Mpa	≤2.5Mpa
DN200	80-800	40-800	Wafer	1.6Mpa	≤10Mpa
			Flange	1.6Mpa	≤2.5Mpa