HAKKO FX-951

Powerful heat recovery feature makes the iron tip temperature hardly decrease even when soldering is repeated.

ESD-compatible design protects the product from static electricity.

Equipped with power-saving functions(sleep and auto power shut-off functions) which help reduce the iron tip load.

Power (V): AC100

Electricity Consumption (W):75

Heater Capacity (W):70

Accessory Iron Tip:None

W x D x H (mm): 80 x 131 x 130

Control Temperature (C):200 to 450

Lead-free solder compliant

Iron part cord length: 1.2m

Specifications

Model No.	FX-951
Power consumption	75 W
Temperature range	200 to 450℃
Temperature stability	±5℃ at idle temperature

Station

Output voltage	AC 24 V
Dimensions	80 (W) × 130 (H) × 131 (D) mm
Weight	1.2 kg

Soldering Iron

Power consumption	70 W (24 V)
Tip to ground resistance	＜2 Ω
Tip to ground potential	＜2 mV
Heating element	Composite heater
Cord length	1.2 m
Total length	188 mm (with T12-D24 tip)
Weight	30 g (with T12-D24 tip)

Total length and weight are measured without cord.

ESD KIT ( ESD Field Service KIT - Blue Anti-static mat with groundings & wrist strap ) with ESD Logo

SKU= ESD-FIELD SERVICE-KIT

The purpose of the Electrostatic Discharge (ESD) Kit is to preserve the inherent reliability and quality of sensitive electronic components handled during maintenance. The kit should be used as directed when handling ESD sensitive components.

Contains:

600 x 600mm PVC COATED NYLON ESD mat, GROUND CORD & WRIST STRAP SET

Notes:

1. How to use ? How to Install?

Use the Electrostatic Discharge (ESD) Kit (GP 8)

Product support for: Xerox Color 8250 Production Printer, Xerox iGen 5 Press, Xerox iGen 150 Press
Article ID: KB0328397
Published: 2015-09-02

If applicable, assemble the kit:
1. Place the static dissipative work surface mat on a flat surface in close proximity to the machine or the component.
2. Connect the snap end of the green grounding cord to the snap on the static dissipative work surface mat. Connect the male end (plug) to the frame.
3. Connect the small snap end of the blue cord to the top snap on the green grounding cord.
4. Connect the small snap end of the blue cord to the snap on the adjustable cloth wrist strap.
5. Place the adjustable wrist strap on the wrist.
The ESD sensitive components can now be handled without causing any ESD related damage. If applicable, place all of the components removed from the machine onto the static dissipative work surface mat.
If applicable, new replacement components, as well as defective components, should be handled during unpacking and repacking using the ESD Kit. During transfer from or to the packing material or container, the component should be placed on the static dissipative work surface mat.