Search Product Code or MPN or SKU here!

Lagunastar Industries Company

软焊 软焊 / はんだ付け はんだ付け
3rd Floor Unit C-22 Banawe de Sta. Rosa Bldg, Balibago, Santa Rosa City, Laguna Philippines 4026
--
Mob. 0933-5996622 SUN ,Mob. 0931-1147369 SUN, Mob. 0976-1479802 Globe , Tel. 049-2542179 --
lagunastar1@yahoo.com, lagunastar1@gmail.com, lagunastar3@yahoo.com ,
--
Skype :lagunastar.industries1 , lagunastar.industries2 , FB page= Soldering Anti-Static

Labels

May 25, 2016

May 24, 2016

Digital Thermometer- Dual Input TES 1320

Digital Thermometer- Dual Input
TES 1320 







Brand new digital temperature meter that supports Celsius & Fahrenheit. Dual input allows you to read temperature from two sensors (up to 1300'C with custom K type TC). It shows the temperature from each sensor or it can do a different display

Specification
  • Range: -50 to 1300'C (-50 to 1999'F) *
  • Resolution: 1'C/ 1'F
  • Max Volt at thermocouple input: 60V DC, 24V AC
  • HOLD button
  • DC 9V (included)
  • Size:5.31" x 2.83" x 1.22"
  • Weight: 10oz
  • Origin = Taiwan

*: Need a special K type thermocouple to read over 200'C. The included thermocouple can sustain up to 200'C heat 

PUSH/PULL gauge meter IMADA FB-50k

PUSH/PULL gauge meter IMADA FB-50k








IMADA PUSH/PULL GAUGE

Series FB Pull Mechanical Force
FB Standard Features

·         Simple, rugged, virtually maintenance free
·         Retains a high degree of accuracy for extended periods
·         Ergonomic, heavy-duty metal construction
·         No batteries needed
·         Intrinsically safe in hazardous environments
·         Capacity up to 150 lbf (push and pull)
·         Overload capacity 165 lbf on all ranges
·         Tare ring 
·         Real time and peak mode
·         Full set of accessories and carrying case included

FB Ranges
Shaft size: 10-32, M6 available
Accuracy: ±0.3% F.S.

Feature
- Peak hold function.
- Zero adjustment for tare weight.
Specifications for Economical Model Mechanical Force Gauge (Push Pull Scale) FB series
Model
FB / FS series
Accuracy
+/-0.3% F.S.
Stroke
10mm
Unit of measurement
Please refer to the table below
Reading method
Real-time track or Peak-hold
Divisions
100lines*
Operating temperature
0 to +40 degree Celcius
Weight **
Approx. 630g(FB-100N)
Accessory
6 kinds of attachments,Inspection certificate, Instruction manual, Carrying case
*30N, 300N, 3K, 30K, 30lb : 120 divisions.
**Weight varies according to the capacities even in the same series, so we note the weight of the most representative one.

Model table of FB / FS series Economical Model Mechanical Force Gauge (Push Pull Scale)
Model
Capacity
1 division
Thread
FB-10N
10N
0.1N
M6
FB-20N
20N
0.2N
FB-30N
30N
0.25N
FB-50N
50N
0.5N
FB-100N
100N
1N
FB-200N
200N
2N
FB-300N
300N
2.5N
FB-500N
500N
5N
Model(NOT available in Japan)
Capacity
1 division
Thread
FS-1K
1kgf
10gf
M6
FS-2K
2kgf
20gf
FS-3K
3kgf
25gf
FB-5K
5kgf
50gf
FB-10K
10kgf
100gf
FB-20K
20kgf
200gf
FB-30K
30kgf
250gf
FB-50K
50kgf
500gf
Model(NOT available in Japan)
Capacity
1 division
Thread
FB-5lb
5lbf
0.05lbf
M6
FB-10lb
10lbf
0.1lbf
FB-20lb
20lbf
0.2lbf
FB-30lb
30lbf
0.25lbf
FB-50lb
50lbf
0.5lbf
FB-100lb
100lbf
1lbf
*In Japan, only N models are allowed to use due to the Measurement Law of Japan.

 


The rugged construction of the FB mechanical force gauges will withstand industrial environments and retain calibration for extended periods. Ergonomic design makes it ideal for hand held use, or it can be mounted to a test stand. The Zero-Tare ring allows you to zero the gauge to compensate for measuring attachments and changes in measuring position. The real time/peak hold selector switch allows you to observe transients or capture peaks. The FB force gauge is an analog force gauge and does not require charging, it is available for use at any time. Many ranges are available to cover all of your force measurement needs (also available in Newtons).

What’s Included with the Gauge?

The FB series is sold in kits complete with force gauge, hard carrying case, five measuring attachments (flat head, conical, chisel, notched, and small hook) as well as a 3 inch extension shaft. An optional handle to facilitate the measurement of heavy loads is also available.
All gauges include a free certificate of calibration traceable to NIST. ISO-17025 certificates are available for an additional charge.
Note: Mechanical force gauges are not recommended for destructive testing or shock load applications.

Pls see Older Post or Labels

Pls see Older Post or Labels