Search Product Code or MPN or SKU here!

Lagunastar Industries Company

软焊 软焊 / はんだ付け はんだ付け
3rd Floor Unit C-22 Banawe de Sta. Rosa Bldg, Balibago, Santa Rosa City, Laguna Philippines 4026
--
Mob. 0933-5996622 SUN ,Mob. 0931-1147369 SUN, Mob. 0976-1479802 Globe , Tel. 049-2542179 --
lagunastar1@yahoo.com, lagunastar1@gmail.com, lagunastar3@yahoo.com ,
--
Skype :lagunastar.industries1 , lagunastar.industries2 , FB page= Soldering Anti-Static

Labels

Mar 15, 2012

OCCUPATIONAL SAFETY & HEALTH STANDARDS

OCCUPATIONAL SAFETY & HEALTH STANDARDS
 (DEPARTMENT OF LABOR & EMPLOYMENT, PHILIPPINES, 1996)

1075: Illumination:

1075.01: General Provisions:

All places where persons work or pass or may have to work or pass in emergencies, shall be providedduring time of use with adequate natural lighting or artificial lighting or both, suitable for the operation andthe special type of work performed.

1975.02: Natural Lighting,

(1) Skylights and windows should be located and spaced so that daylight conditions are fairly uniformover the working area.

(2) Where necessary, skylights and windows should be provided with means to avoid glare.

(3) A regular system of cleaning skylights and windows should be established to ensure that they are keptclean at all times.

1075.03: Artificial Lighting:

Quality:

(1) Artificial lighting shall be provided when daylight fails or for area where the daylight illumination isinsufficient.

(2) The general lighting should be of uniform level, widely distributed to avoid harsh shadows or strongcontrast and free from direct or reflected glare.

(3) Where intense local lighting is necessary, a combination of general and supplementary lighting at thepoint of work may be provided.

(4) Supplementary lighting shall be specially designed for the particular visual task and arranged or provided with shading or diffusing devices to prevent glare.


1075.04: Intensity:

(1) Artificial lighting shall be adequate at the place of work for the operation or work performed.

(2) A minimum of 20 lux (2 foot candles) shall be provided for yards, roadways and outside thoroughfares.

(3) A minimum of 50 lux (5-foot candles) shall be provided:

a. where discrimination of detail is not essential, such as handling coarse materials, coal or ashes, roughsorting or grinding of clay products;

b. for passageways, corridors, stairways, warehouses, storerooms for rough and bulky materials.

38
 
(4) A minimum of 100 lux (1 0 foot candles) shall be provided:

a. where slight discrimination of detail is essential such as for the production of semi finished iron andsteel products, rough assembling, milling of grains, opening, picking and carding of cotton, or other primary operation in most of the industrial processes; and

b. for engine and boiler rooms, passenger and freight elevators, crating and boxing departments,receiving and shipping rooms, storerooms, and stockrooms for medium and fine materials, locker rooms,toilets, and washrooms.

(5) A minimum of 200 lux (20 foot candles) shall be provided where moderate discrimination of details isessential, such as for medium assembling, rough bench and machine work, rough inspection of testing of products, sewing light-colored textile or leather products, canning and preserving, meat packing, planingof lumber and veneering.

(6) A minimum of 300 lux (30 foot candles) shall be provided where close discrimination of details isessential such as for medium bench and machine work, medium inspection, fine testing, flour grading,leather finishing and weaving cotton goods or light colored cloth/goods or for office desk work withintermittent reading and writing for filing and mail sorting.

(7) A minimum of 500 to 1,000 lux (50 to 100 foot candles) shall be provided where discrimination of finedetails is involved under conditions of a fair degree of contrasts for long assembling, fine bench andmachine work, fine inspection, fine polishing and beveling of glass, fine wood-working and weaving darkcolored cloth/goods, or for accounting, bookkeeping, drafting, stenographic work, typing or other prolonged close office desk work.

(8) A minimum of I 000 lux (1 00 foot candles) shall be provided where discrimination of extremely finedetail is involved under conditions of poor contrast for long periods of time, such as for extra fineassembling instrument, jewellery, and watch manufacturing, grading and sorting tobacco products, make-up and proof-reading in printing plants, and inspection of sewing dark-colored cloth products.

(9) The provisions of paragraphs 2 to 8 apply to lighting equipment under average operating conditions.Where conditions allow, it may be necessary to provide initially an illumination of at least 25% more. Inlocations where dirt will collect rapidly, the initial level should be at least 50% above the recommendedstandards.

(10) Any windowless room shall be provided with general lighting sufficient in intensity for the mostexacting operations carried therein.

(11) Detailed standards of lighting intensity for different operations of work environment shall be asprovided in Table 8c.

Note: I foot candle = 10.75 lux

For purpose of computation use I foot candle = 10 lux

1075.06: Table of Illumination Levels:

Table 8c



1075.06: Emergency Lighting:

(1) Where large numbers of persons are employed in buildings more than one story in height, emergencylighting system shall be provided in all important stairways, exits, workplaces and passages.

(2) Emergency systems shall be capable of producing and maintaining for at least one (1)

hour, aminimum intensity of 5 lux (0.5 ft. candle) and shall have an energy source

independent of the generallighting system installation.

39
 
(3) Provisions shall be made for the automatic lighting of the emergency system immediately upon failureof the general lighting system.

Source = http://www.scribd.com/doc/12040887/DOLE-Occupational-Safety-and-Health-Standards

Mar 9, 2012

Surface Resistivity Checker BOSCHSTAT BSC-SRM



BSC-SRM Surface Resistance Meter

BSC-SRM is an ultra wide-range, battery operated, portable instrument for measuring Surface Resistivity of virtually any flat surface conforming to ASTM D-257 standard by using recommended parallel bar sensing probe. In the circuit industry, products such as packaging materials, ESD shielding bags, work bench surfaces, static dissipative table and floor mats, conveyor belts, etc, have resistance values which need to conform to stringent specifications, Moreover, these values are expected to fall with in specified limits. The Surface Resistivity Meter can play a vital role in monitoring and checking the resistivity characteristic of the above items.
Specification:
Operating Temperature
0-50
Relative Humidity
0%-80% RH
Test Voltage
9 volts
Size
137(L)×76(W)×30(D)mm
Weight
120g
Accuracy
± 1/2 decade
Repeatability
± 5%
Measurement Range
103-1012 ohms per square
Resolution
One decade
Indication
Visual by LED’S
Test Actuation
ON / OFF Switch
Power Supply
9 volt DC Battery
Calibration
Recommended every 12 months
Warranty
12 months
Accessories include
1m Grounding Cord & Carrying Leather Bag

It also has unique additional feature of surface-to-ground measurement capability wherein the resistivity differential between any surface and any chosen ground can be determined.

The surface resistivity is conveniently indicated by a row of LED’s covering a total of 10 decades from 103-1012 ohms per square.

Instruction to use:
Place the meter on the material to be tested and push the RED button in the middle of the unit. The unit measures the resistance between two electrodes on the back of the meter to determine surface resistivity, The LED that is lit, will indicate the surface resistivity in ohms per square.
Readings in Conductive Band
103= 1K Ohm
104= 10K Ohms
105= 100K Ohms

Readings in Insulating Band
1012= 1,000,000 Meg Ohms or greater

Readings in Static Dissipative Band
106= 1 Meg Ohms
107= 10 Meg Ohms
108= 100 Meg Ohms
109= 1,000 Meg Ohms
1010= 10,000 Meg Ohms
1011= 100,000 Meg Ohms

Resistance to ground measurement
Plug the stereo plug of the ground lead into the jack marked GROUND on the side of the meter. Connect the alligator clip to a suitable ground point for the material to the tested. For table mats, this will be generally be the snap for the mats ground cord. Place the meter in the desired location and push the RED test button. The unit will measure the resistance from the electrode on the right to the ground point. RTG values are measured in Ohms.


Mar 6, 2012

Vessel TORQUE BITS or Electric Screwdriver Bits ( Japan)






Available with stocks
TORX BIT 
T5 X 2 X20 X40
T5 X 2 X20 X60
T6 X 40
D73 Cross point 
+00x1.5x40
+0 x 2 x40
+1x4x40
D76 cross point
+1x5x60
D76 Torx bit
T5X60
D71 torx bit
T5X44
B34 CROSS POINT bit
+1x4x30 x70

----------------------------------------------------
notes:
1 . VESSEL Bits Cross-reference sheet with HIOS bits”.

the cross-reference for Slotted bits is added
HIOS

Product No.
(VESSEL)
VESSEL
BP - H4 - #00 - 1.5 - 40

445981
D73 +00x1.5x40
BP - H4 - #00 - 1.5 - 60

445982
D73 +00x1.5x60
BP - H4 - #00 - 1.5 - 80

446006
D73  +00x2.0  x20x 80
BP - H4 - #0 - 1.2 - 40

446016
D73  +0 x1.4   x20x 40
BP - H4 - #0 - 1.5 - 40

446022
D73  +0 x1.5x20x 40
BP - H4 - #0 - 1.5 - 60

446017
D73  +0 x1.4x20x 60
BP - H4 - #0 - 1.5 - 80

446018
D73  +0 x1.4x20x 80
BP - H4 - #0 - 1.7 - 40

445985
D73 +0 x 1.7 x 40
BP - H4 - #0 - 1.7 - 60

445986
D73 +0 x 1.7 x 60
BP - H4 - #0 - 1.7 - 80

446024
D73  +0 x1.7x40x 80
BP - H4 - #0 - 1.8 - 60

446023
D73  +0 x1.7x30x 60
BP - H4 - #0 - 2.0 - 40

446025
D73  +0 x2.0  x20x 40
BP - H4 - #0 - 2.0 - 60

446026
D73  +0 x2.0  x20x 60
BP - H4 - #0 - 2.0 - 80

446027
D73  +0 x2.0  x20x 80
BP - H4 - #0 - 2.0 - 100

446028
D73  +0 x2.0  x20x100
BP - H4 - #0 - 2.0 - 120

PBEXP-2250
D73 (+)0X2X20X120
BP - H4 - #0 - 2.5 - 40

445987
D73 +0  x2.5 x40
BP - H4 - #0 - 2.5 - 60

445988
D73 +0  x2.5 x60
BP - H4 - #0 - 2.5 - 80

446033
D73  +0 x2.5x20x 80
BP - H4 - #0 - 2.5 - 100

446034
D73  +0 x2.5x20x100
BP - H4 - #0 - 2.5 - 120

PBEXP-2932
D73 (+)0X2.5X20X120
BP - H4 - #1 - 3.0 - 40

445989
D73 +1 x3.0 x40
BP - H4 - #1 - 3.0 - 60

446053
D73  +1 x3.0  x20x 60
BP - H4 - #1 - 3.0 - 80

446054
D73  +1 x3.0  x20x 80
BP - H4 - #1 - 3.0 - 100

446058
D73  +1 x3.0  x30x100
BP - H4 - #1 - 3.0 - 120

ASK
BP - H4 - #1 - 4.0 - 40

445990
D73 +1 x4.0  x 40
BP - H4 - #1 - 4.0 - 60

446059
D73  +1 x4.0  x 60
BP - H4 - #1 - 4.0 - 80

446060
D73  +1 x4.0  x 80
BP - H4 - #1 - 4.0 - 100

446061
D73  +1 x4.0  x 100
BP - H4 - #1 - 4.0 - 120

446062
D73  +1 x4.0  x 120
BP - H4 - #1 - 4.0 - 150

PBEXP-2968
D73 (+)1 x 4 x 150
BP - H4 - #1 - 4.0 - 180

PBEXP-1374
D73 1x4x180
BP - H4 - #1 - 4.0 - 200

ASK
BP - H4 - #2 - 4.0 - 40

445991
D73 +2  x4.0   x    40
BP - H4 - #2 - 4.0 - 60

446070
D73  +2  x4.0  x    60
BP - H4 - #2 - 4.0 - 80

446071
D73  +2  x4.0  x    80
BP - H4 - #2 - 4.0 - 100

446072
D73  +2  x4.0  x   100
BP - H4 - #2 - 4.0 - 120

446073
D73  +2  x4.0  x   120
BP - H4 - #2 - 4.0 - 150

PBEXP-2296
D73 (+)2 x 4 x 150
BP - H5 - #0 - 2.0 - 60

PBEXP-2129
D76 (+)0Xφ2X20X60
BP - H5 - #0 - 2.5 - 60

446242
D76 +0   x2.5 x60
BP - H5 - #0 - 2.5 - 80

446259
D76  +0  x2.5 x30x 80
BP - H5 - #0 - 2.5 - 100

PBEXP-2462
D76 (+)0x3x30x100
BP - H5 - #0 - 2.5 - 120

ASK
BP - H5 - #1 - 3.0 - 40

446266
D76  +1  x3.0   x15  x40
BP - H5 - #1 - 3.0 - 60

446243
D76 +1   x3.0          x60
BP - H5 - #1 - 3.0 - 80

446267
D76  +1  x3.0   x30  x 80
BP - H5 - #1 - 3.0 - 100

446268
D76  +1  x3   x30    x100
BP - H5 - #1 - 3.0 - 120

446269
D76  +1  x3   x30    x120
BP - H5 - #1 - 5.0 - 40

ASK
BP - H5 - #1 - 5.0 - 60

483125
D76 +1  x5 x   60
BP - H5 - #1 - 5.0 - 80

446270
D76  +1 x5 x    80
BP - H5 - #1 - 5.0 - 100

446271
D76  +1 x5 x   100
BP - H5 - #1 - 5.0 - 120

446272
D76  +1 x5 x   120
BP - H5 - #1 - 5.0 - 150

446273
D76  +1 x5 x   150
BP - H5 - #1 - 5.0 - 180

PBEXP-2252
D76 (+)1X5X180
BP - H5 - #1 - 5.0 - 200

ASK
BP - H5 - #1 - 5.0 - 250

ASK
BP - H5 - #1 - 5.0 - 300

ASK
BP - H5 - #2 - 5.0 - 40

PBEXP-2256
D76 (+)2X5X40
BP - H5 - #2 - 5.0 - 60

446245
D76 +2  x5  x  60
BP - H5 - #2 - 5.0 - 80

446279
D76  +2 x5  x   80
BP - H5 - #2 - 5.0 - 100

446280
D76  +2 x5  x  100
BP - H5 - #2 - 5.0 - 120

446281
D76  +2 x5  x  120
BP - H5 - #2 - 5.0 - 150

446282
D76  +2 x5  x  150
BP - H5 - #2 - 5.0 - 180

PBEXP-2253
D76 (+)2 x 5 x180
BP - H5 - #2 - 5.0 - 200

446283
D76  +2 x 5 x 200
BP - H5 - #2 - 5.0 - 250

PBEXP-2255
D76 (+)2 x 5 x 250
BP - H5 - #2 - 5.0 - 300

ASK
BP - H5 - #2 - 5.0 - 400

ASK
BP - H5 - #3 - 7.0 - 60

ASK
BP - H5 - #3 - 7.0 - 80

ASK
BP - H5 - #3 - 7.0 - 100

ASK
BP - H5 - #3 - 7.0 - 120

ASK
BS - H4 - 1.1 - 0.28 - 60

446075
D73 -11x0.28x20x60
BS - H4 - 1.1 - 0.28 - 80

446076
D73  -1.1x0.28x20x80
BS - H4 - 1.3 - 0.28 - 60

446078
D73  -1.3x0.28x20x60
BS - H4 - 1.3 - 0.28 - 80

446079
D73  -1.3x0.28x20x80
BS - H4 - 1.5 - 0.3 - 40

446080
D73  -1.5x0.30x20x40
BS - H4 - 1.5 - 0.3 - 60

446081
D73  -1.5x0.30x20x60
BS - H4 - 1.5 - 0.3 - 80

446082
D73  -1.5x0.30x20x80
BS - H4 - 1.7 - 0.3 - 40

446083
D73  -1.7x0.30x20x40
BS - H4 - 1.7 - 0.3 - 60

446084
D73  -1.7x0.30x20x60
BS - H4 - 1.7 - 0.3 - 80

446085
D73  -1.7x0.30x20x80
BS - H4 - 1.8 - 0.4 - 60

446087
D73  -1.8x0.40x20x60
BS - H4 - 1.8 - 0.4 - 80

446088
D73  -1.8x0.40x20x80
BS - H4 - 2.0 - 0.4 - 40

446089
D73  -2  x0.40x20x40
BS - H4 - 2.0 - 0.4 - 60

446090
D73  -2  x0.40x20x60
BS - H4 - 2.0 - 0.4 - 80

446091
D73  -2  x0.40x20x80
BS - H4 - 2.3 - 0.4 - 60

446093
D73  -2.3   x0.40x20x 60
BS - H4 - 2.3 - 0.4 - 80

446094
D73  -2.3   x0.40x20x 80
BS - H4 - 2.5 - 0.4 - 40

446095
D73  -2.5   x0.40x20x 40
BS - H4 - 2.5 - 0.4 - 60

446096
D73  -2.5   x0.40x20x 60
BS - H4 - 2.5 - 0.4 - 80

446097
 D73  -2.5   x0.40x20x 80
BS - H4 - 2.8 - 0.4 - 60

446099
D73  -2.8   x0.40x20x 60
BS - H4 - 2.8 - 0.4 - 80

446100
D73  -2.8   x0.40x20x 80
BS - H4 - 3.0 - 0.4 - 40

446101
D73  -3.0  x 0.4 x 20 x 40
BS - H4 - 3.0 - 0.4 - 60

446102
D73  -3     x0.40x20x 60
BS - H4 - 3.0 - 0.4 - 80

446103
D73  -3     x0.40x20x 80
BS - H4 - 4.0 - 0.6 - 40

446104
D73  -4 x0.60x 40
BS - H4 - 4.0 - 0.6 - 60

446105
D73  -4 x0.60x 60 
BS - H4 - 4.0 - 0.6 - 80

446106
D73  -4 x0.60x 80
BS - H4 - 4.0 - 0.6 - 100

ASK
BS - H5 - 2.0 - 0.4 - 60

ASK
BS - H5 - 2.5 - 0.4 - 60

ASK
BS - H5 - 3.0 - 0.4 - 60

483141
D76 -3X0.4X60
BS - H5 - 3.0 - 0.4 - 80

ASK
BS - H5 - 4.0 - 0.6 - 60

483142
D76 -4X0.6X60
BS - H5 - 5.0 - 0.7 - 60

483143
D76 -5X0.7X60
BS - H5 - 5.0 - 0.7 - 80

ASK
BS - H5 - 5.0 - 0.7 - 100

ASK
BS - H5 - 5.0 - 0.7 - 120

ASK
BS - H5 - 5.0 - 0.7 - 150

ASK
BS - H5 - 5.0 - 0.7 - 180

ASK
BS - H5 - 7.0 - 1.0 - 60

ASK

====================
2. actual pic
 D73 +0 x 2 x20 x 40



                                                                D73 +0 x 1.5 x20 x 40

Pls see Older Post or Labels

Pls see Older Post or Labels