HANSTAR 858D Hot air rework station (left pictures)HANSTAR 868D Digital Rework Partner (right pictures)
* Two in one, (hot air nozzle & soldering iron combined)
-For Repair of SOIC、CHIP、QFP、SOP, PLCC、BGA, etc.
Features:
1. Closed path of transducer, micro computerized zero-crossing trigger of temperature control, LED display, high power,
fast rise of temperature, accurate and steady temperature, no impact from air volume and real lead-free unsoldering.
2. Adjustable air current, big wind volume and gentle wind, convenient temperature adjustment, and can be applied to several purposes.
3. There is an inductive switch in the handle. When holding the handle, the system can enter working mode quickly and
when putting the handle back to the handle holder, the system will enter stand-by state. Therefore, it is very convenient to operate.
4. With automatic cold wind function, which can prolong service life of the heating element and protect the hot air gun.
5. Adopt alloy shell. The machine body is small, durable and nice and covers little working space.
6. Adopt brushless fan thus enjoy very long service life and generate low noise. Adopt high quality heating element,
which doubles the efficiency under the same situation, prolongs service life of the heating element and saves power consumption.
7. 1 set includes 3 nozzles: A2084 (dia 8.4mm), A2127 (dia 12.7mm), A2064 (dia 6.4mm)
Item no.: 858D rework Item no.: 868D Rework Partner
Hot Air
Sort: Digital control
Power consumption: 700W
Pump: Soft wind ,Noise: < 45db
Air current: 120L/minute (Max.)
Temp. range: 100℃-450℃
Handle length: 120cm
Size: 13.8 x 10 x 15cm, about 1.55kg
for 868D only:
soldering iron 907 specs the same in the previous models(852,936)
notes:
1. HANSTAR 858D / 868D important notes in operation:
1. The Hot Air Gun of Hanstar 858D/ 868D has a movement sensor inside it. It is a safety feature & at the same time will help prolong the heating element. When not in use, please put back the Hot Air Gun in its Gun Holder , then afterwards, the Hot Air temperature will drop to 100degC & then after a few seconds will go on Sleep (---) . after a few seconds , its Air Flow will also stop & will it will be AUTOMATIC OFF.
(---) display means the Hot Air Gun is in sleep Mode. To use the Hot Air Again, simply get or move the Hot Air Gun & it will reactivate operation.
After your work is done, just put the Hot Air Gun in its Gun Holder so it will be put in Sleep & Automatic OFF, & then Turn OFF the Hot Air Power Switch. This will help prolong the heater since the Airflow before Automatic OFF will cool off the heater
2. For the Operation of Soldering Iron of Hanstar 868D=
NOTE= IF you are currently using the Hot Air Gun, Please Place the Hot Air Gun to the Gun Holder to make it on Sleep mode (---), & then Proceed to Step 2. If you are not using the Hot Air Gun, proceed to step 1.
Step 1. Turn ON the Power Switch of the HOT Air Gun. The Hot Air Gun will be on Sleep (---) & is on Automatic Off mode.
Step 2. Turn ON the Power Switch of the Soldering Iron, & Adjust the Desired Temperature by Adjusting Iron Temperature Knob. Suggested Temperature is 315 to 350 deg C.
NOTE= FOR SAFETY REASON & to Prolong the Lifespan of the Heating elements of Hot Air & Soldering Iron, It is suggested that you MUST NOT OPERATE both the Hot Air Gun & Soldering Iron AT THE SAME TIME
2. Cross Reference from other supplier = Yihua 858 , Yihua 868, Takko 858, Takko 868
